Some scanguage II questions - Toyota Yaris Forums

captainm27 · 11-03-2008, 02:40 PM

For those who have the scanguage II

1. Do you have a permanent setup, so that it is always connected to your car?

2. Does it draw power from an internal battery or from the car?

3. Is it safe to leave it in the car during the cold winters and hot summers?

4. Do you leave the fuse cover open to keep it connected, or is there a way to keep it closed and still have the wire connected?

I saw a few pictures of it, but since the hack, I'm not sure if there are anymore pictures of users with it on.

rningonfumes · 11-03-2008, 02:58 PM

1. Semi- Permanent -- I've wrapped it around the steering column. The length of cord conveniently ends at the very top, ie it allows the unit to sit right on top of the steering column.

2. Power from Battery..but it can remember you set up and data from within 1 fill up.

3. Cold...yes, Hot summer...not exactly. When I leave the car, I take the unit and tuck it into the little cubby hole to the right of the driver's knee. I'm sure the unit can stand high temp (as high as the car interior can go)..but Direct sunlight is a no no because of the LCD display.

4. Fuse cover? The obd2 port is under the fuse area..under the whole dash. So no worries about the fuse cover.

jambo101 · 11-03-2008, 03:02 PM

I left mine in the car all summer and I never had a problem with heat
It takes its power from the car ,there are no batteries in the unit.
There is no fuse cover it just plugs into the OBD11 connector.

captainm27 · 11-03-2008, 03:08 PM

Quote:

Originally Posted by rningonfumes

1. Semi- Permanent -- I've wrapped it around the steering column. The length of cord conveniently ends at the very top, ie it allows the unit to sit right on top of the steering column.

2. Power from Battery..but it can remember you set up and data from within 1 fill up.

3. Cold...yes, Hot summer...not exactly. When I leave the car, I take the unit and tuck it into the little cubby hole to the right of the driver's knee. I'm sure the unit can stand high temp (as high as the car interior can go)..but Direct sunlight is a no no because of the LCD display.

4. Fuse cover? The obd2 port is under the fuse area..under the whole dash. So no worries about the fuse cover.

Quote:

Originally Posted by jambo101

I left mine in the car all summer and I never had a problem with heat
It takes its power from the car ,there are no batteries in the unit.
There is no fuse cover it just plugs into the OBD11 connector.

Thanks for your answers! Oh, for some reason, I was under the impression that the OBDII connector was behind the fuse cover....hmmm..... oh well, thank you very much for clearing that up!

captainm27 · 11-03-2008, 03:18 PM

That's hot setup you got there, echo!

stran · 11-03-2008, 04:10 PM

clarification on question #2, it draws power from the car battery. it does not have an internal battery.

i've kept mine in the car all the time even in summer heat waves of +100F. i haven't permanently damaged it yet, though when it gets really hot, the LCD gets really dark and it's hard to read. you can also put a piece of foil on the back side to reflect sunlight, because the black plastic body sucks in a lot of heat.

jambo101 · 11-03-2008, 05:13 PM

Used to be a sticky on all things Scangauge including fully illustrated installs but i cant find it..

jambo101 · 11-07-2008, 03:54 AM

http://www.yarisworld.com/forums/showthread.php?t=1005
Here it is, doesnt seem to be a sticky any more

Revsson · 11-08-2008, 01:51 PM

Maybe the mods can sticky it again. I am thinking about a Scanguage II myself, as I read this before the hack and before I became a member. Decisions on where to mount it haven't been made on my part.

jambo101 · 11-08-2008, 04:52 PM

Quote:

Originally Posted by jambo101

http://www.yarisworld.com/forums/showthread.php?t=1005
Here it is, doesnt seem to be a sticky any more

Post 34 (pg 3)in the sticky link shows a pic of the Scanguage plugged into the OBD11 port.

Revsson · 11-08-2008, 11:08 PM

Here is a more direct link:
http://www.yarisworld.com/forums/sho...7&postcount=34

11-03-2008, 02:40 PM	#1
captainm27 Drives: 2008 Sedan A/T Silver Join Date: Nov 2008 Location: New Jersey Posts: 202	Some scanguage II questions For those who have the scanguage II 1. Do you have a permanent setup, so that it is always connected to your car? 2. Does it draw power from an internal battery or from the car? 3. Is it safe to leave it in the car during the cold winters and hot summers? 4. Do you leave the fuse cover open to keep it connected, or is there a way to keep it closed and still have the wire connected? I saw a few pictures of it, but since the hack, I'm not sure if there are anymore pictures of users with it on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Going to Dealer, questions on options.	ejaf	New YARIS Purchase Forum	24	11-19-2008 03:05 PM
GB Scanguage toronto area	uncleyaris	Items for Sale by private party	3	08-01-2007 08:36 PM
Yaris Questions	Tokiko	New YARIS Purchase Forum	21	07-31-2007 08:36 PM
Lowering Springs - Questions ~	jaspie	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	01-10-2007 09:21 AM
Questions, questions...	littlecarlove	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	3	10-21-2006 02:42 PM

11-03-2008, 02:58 PM	#2
rningonfumes Drives: Yaris Sedan 5MT Join Date: Oct 2008 Location: SoCal Posts: 865	1. Semi- Permanent -- I've wrapped it around the steering column. The length of cord conveniently ends at the very top, ie it allows the unit to sit right on top of the steering column. 2. Power from Battery..but it can remember you set up and data from within 1 fill up. 3. Cold...yes, Hot summer...not exactly. When I leave the car, I take the unit and tuck it into the little cubby hole to the right of the driver's knee. I'm sure the unit can stand high temp (as high as the car interior can go)..but Direct sunlight is a no no because of the LCD display. 4. Fuse cover? The obd2 port is under the fuse area..under the whole dash. So no worries about the fuse cover.

11-03-2008, 03:02 PM	#3
jambo101 Drives: yaris 08 sedan Join Date: Oct 2008 Location: Montreal Canada Posts: 1,286	I left mine in the car all summer and I never had a problem with heat It takes its power from the car ,there are no batteries in the unit. There is no fuse cover it just plugs into the OBD11 connector.

11-03-2008, 03:18 PM	#5
captainm27 Drives: 2008 Sedan A/T Silver Join Date: Nov 2008 Location: New Jersey Posts: 202	That's hot setup you got there, echo!

11-03-2008, 04:10 PM	#6
stran Drives: '07 Yaris 3D HB Auto Join Date: Jul 2007 Location: Cal Posts: 44	clarification on question #2, it draws power from the car battery. it does not have an internal battery. i've kept mine in the car all the time even in summer heat waves of +100F. i haven't permanently damaged it yet, though when it gets really hot, the LCD gets really dark and it's hard to read. you can also put a piece of foil on the back side to reflect sunlight, because the black plastic body sucks in a lot of heat.

11-03-2008, 05:13 PM	#7
jambo101 Drives: yaris 08 sedan Join Date: Oct 2008 Location: Montreal Canada Posts: 1,286	Used to be a sticky on all things Scangauge including fully illustrated installs but i cant find it..

11-07-2008, 03:54 AM	#8
jambo101 Drives: yaris 08 sedan Join Date: Oct 2008 Location: Montreal Canada Posts: 1,286	http://www.yarisworld.com/forums/showthread.php?t=1005 Here it is, doesnt seem to be a sticky any more

11-08-2008, 01:51 PM	#9
Revsson View User's Garage Drives: 2009 Meteorite Metallic LB MT Join Date: Oct 2008 Location: Southeast Wisconsin Posts: 810	Maybe the mods can sticky it again. I am thinking about a Scanguage II myself, as I read this before the hack and before I became a member. Decisions on where to mount it haven't been made on my part.

11-08-2008, 11:08 PM	#11
Revsson View User's Garage Drives: 2009 Meteorite Metallic LB MT Join Date: Oct 2008 Location: Southeast Wisconsin Posts: 810	Here is a more direct link: http://www.yarisworld.com/forums/sho...7&postcount=34