|
|
08-29-2007, 05:30 PM | #1 |
Drives: 3 door lb Join Date: Jul 2007
Location: long beach ca
Posts: 55
|
dyno sheets will be up tonight *hopefully
the parts i have installed are the
trd axle back exhaust version s aem cold air intake nst crank pulley dc headers w/header wrap greddy oil catch can apexi grounding kit espiler springs c one front and rear upper strut bars cusco 4 point front underbrace middle and rear lower braces apexi tach apr canards and windsplitter carbon fiber spoiler i will post up a video of the dyno hopefully tonight so what does everyone think the car will achieve its getting dyno tuned and finding the most gains for the grounding kit. Also to note the car will be on a mustang dyno. So i just wanted everyone opinion what you guys think i would achieve thanks Mike |
08-29-2007, 05:37 PM | #2 |
Drives: Sc'd Yaris Sedan. Join Date: May 2007
Location: civilwar town.
Posts: 660
|
Nice. I can't wait to see the numbers. We have seen mine, so I'm not expecting much. :p Hopefully I'll be surprised.
__________________
Tantum religio potuit suadere malorum. |
08-29-2007, 06:42 PM | #3 |
Drives: 2007 Yaris Sedan "D" package Join Date: May 2006
Location: Barrie, ontario
Posts: 852
|
so total for couple grand you gained what 10hp???
__________________
out of respect for nutzoid, I changed my avatar. |
08-29-2007, 07:04 PM | #4 |
Drives: Sc'd Yaris Sedan. Join Date: May 2007
Location: civilwar town.
Posts: 660
|
My CAI= 0whp. :p So knock 2 off that. :)
__________________
Tantum religio potuit suadere malorum. |
08-29-2007, 07:46 PM | #5 |
Modded Moderator
Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007
Location: Wenatchee, WA
Posts: 3,670
|
I believe the NST pulley frees up HP to the wheels, although it does not increase crank HP. The TRD v. S exhaust dynos at 2+, not 2- HP.
|
08-29-2007, 07:53 PM | #6 |
Drives: 3 door lb Join Date: Jul 2007
Location: long beach ca
Posts: 55
|
so sorry to bust your bubble but i havent even nearly spent that much money because my brother in law ownes a shop so basically parts for my car is basically free or what not its a econo car so i dont expect a lot of hp its a free dyno session so why should i care and showing fellow yaris members what to get and possible what not to get thats all
|
08-29-2007, 08:31 PM | #7 |
Drives: Sc'd Yaris Sedan. Join Date: May 2007
Location: civilwar town.
Posts: 660
|
Yeah I really want to see the numbers. Plus even if it were 10whp... That's pretty good for an NA 2200lbs car.
__________________
Tantum religio potuit suadere malorum. |
08-30-2007, 07:59 AM | #8 | |
Drives: 2007 Yaris Sedan "D" package Join Date: May 2006
Location: Barrie, ontario
Posts: 852
|
Quote:
Ooops didn't burst my bubble, whatever is meant by that comment anyway... I really could care less if you stole the parts! I await your dyno sheet.
__________________
out of respect for nutzoid, I changed my avatar. |
|
08-29-2007, 09:00 PM | #9 | |
Quote:
Edit: I doubt you will gain anything,even with the performance parts.
__________________
|
||
08-29-2007, 09:26 PM | #10 |
Drives: 2007 Yaris HB Join Date: Apr 2007
Location: my own little world
Posts: 1,256
|
|
08-29-2007, 10:19 PM | #11 |
I want some results tonight!! :)
|
|
08-29-2007, 10:55 PM | #12 |
Gas Guzzler
|
RESULTS! I'm thinking about adding the NST pulleys and dc headers. It'll be nice to see if it'd help as far as the numbers are concerned.
|
08-30-2007, 04:07 AM | #13 |
Drives: 3 door lb Join Date: Jul 2007
Location: long beach ca
Posts: 55
|
alright what i pulled with those mods was 103.61 to the wheels on a dynojet will post up dyno sheet tommrrow and video cause my friend has to load it for me whoever was intrested in the numbers without the apexi grounding kit was 100.39 so calculating 15% to produce whp so we got 103 but to the flywheel we are estimating 120 to the flywheel stock dyno was 88-90whp so approx a nice 13-15 whp gain so its nice for a little econo car i will post up dyno sheet hopefully soon so those bolt ons
|
08-30-2007, 08:20 AM | #14 | |
Quote:
how does the car feel now? |
||
08-30-2007, 08:29 AM | #15 | |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
Quote:
__________________
|
|
08-30-2007, 10:55 PM | #16 |
good info...
awsome info... ive always wonder if grounding kits were a legit way to increase hp or just a way to flush $$$ down an engine bay... you've answered my question
|
|
08-31-2007, 02:13 AM | #17 |
Drives: 3 door lb Join Date: Jul 2007
Location: long beach ca
Posts: 55
|
actually i did take a base line with in 3 pulls i got 88 is the lowest and 90 is the max and with all the parts and grounding kit like mounted at different places to see which place gave optium power was at 103 but on a couple other pulls i got 100-101 back and forth but its in that range its nice it handles well and i enjoy every bit of the yaris now for the track to see whats up with it
|
08-31-2007, 03:32 AM | #18 |
Drives: Yaris Hatch /Landrover D2 Join Date: Jun 2007
Location: Canada
Posts: 242
|
Espiler springs, I call B.S. I contacted them and they had nothing available for the 07 yaris ? where did you get them and what's the part #
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dyno test of my Yaris TS 2001 | PowerDyn | Performance Modifications | 9 | 05-07-2007 10:26 AM |
anybody have dyno charts for superchargers | turboyaris | Forced Induction Forum | 4 | 04-09-2007 03:37 PM |
WR Yaris Intake Picture & Dyno. | WRLEO | Performance Modifications | 37 | 04-05-2007 07:02 PM |
dyno results are in!!!! | turboyaris | Performance Modifications | 105 | 04-01-2007 06:03 PM |
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS ! | WRLEO | Sponsors Classifieds Area | 0 | 02-22-2007 10:14 AM |