Turbo Kit - trade for stock parts!

[crankyelbow]

I'll need the stock exhaust system, headers o2 sensors etc. We'll have to do the swap in one day, or at least snatch off the parts from my car and bolt on the stock parts, the turbo kit is definitely a 1 day job. The passenger axle has to come out/front bumper off to route the intercooler piping. I believe there is also a bracket that needs to be trimmed up front, no major mods to fit it though.

Looking to go to a TC and turbo that ;).

This is the ZPI kit - emanage/14b/FMIC with a 2.5" stainless exhaust that has a resonator nothing else. I have a tach and boost guage that would be included. The kit has 40k of trouble free miles on it, I have an auto so the turbo didn't have alot of stress on it (for the sake of the tranny, which is still holding perfectly!). People will rag on the ZPI setup of using the emanage in limp mode, but I've got 40k on the *original* tune with 0 issues!!!! If you don't want the emanage thats fine too, knock off $100 :)

Looking for trade + $, highest offer will get it.. I'm not stingy, we can certainly make a deal so long as my car can be back and running stock with no check engine light! This will certainly be the cheapest way for whoever takes advantage of this to get a turbo on their car!!!

I also have a very cool set of old school ANSEN 13's with sumitumo tires. they are 205's, not sure of the height but they are slightly shorter than stock. Slight tightening of the gears which feels *verY* nice with the turbo! Much quicker spool and much better launch, was a great upgrade :) Would be nice to also work a trade or sell these, as I won't have a car to put them on.

I'm just south of chicago, and am more than willing to let someone sit in the passenger side/race their yaris to show them the difference, 7psi of boost on this light car is dramatic and extremely worth the upgrade... especially with a deal like this!!!!

If interested give me a call - 77367774961. I don't have much opportunities to get online so calling would be the best. Sooner the better, closer the better, but if my driving expenses are compensated I'll cruise to Alaska! :)

So who's gonna jump on this one? I'll start the "bidding" at trade of stock parts/install + $450!!!! I really wanna see someone with this who will flog it like its supposed to be flogged... this turbo has been treated too nicely!

I know the wheels won't sell without a pic, which I don't have on here now, but I'll set the price at $200 for the set. These are old school, from an opel astra race car that was parked in somebodies garage and bought up for a project, the guy upgraded to 5 lug and sold me these gems - REAL Ansen rims from way back when (70's?). They poke out a bit as they are a RWD offset, but the handling difference is tremendous with these tires + wider stance... ahhh... but with a lowered car they may rub (no issues stock suspension).

I'd like to see it all go at once to the same person, but I'll happily sit on the rims, the turbo has gotta move :)

[ztrack157]

Damn tempting as hell.

[Tamago]

would help to state where you're located

[ztrack157]

He says south of Chicago.

[Tamago]

width on the 13's btw?

[Tamago]

Originally Posted by ztrack157

He says south of Chicago.

thanks i can't read lol

[kou]

Got it for you right here. what state are you i will drive to you and hand you what you need,you hand me everything in a box and idrive away no need to swap it over i cann do that at home THanks.

[Tamago]

Originally Posted by kou

Got it for you right here. what state are you i will drive to you and hand you what you need,you hand me everything in a box and idrive away no need to swap it over i cann do that at home THanks.

how are you gonna make a greddy management work lol

[ztrack157]

Pic of rims?

[kou]

Originally Posted by Tamago

how are you gonna make a greddy management work lol

actualy wouldnt need it.


i jumped to soon didnt look at the state my bad also didnt read whole post wouldnt need most of that stuff..but if you were closer.

[Tamago]

just a guess :

[Tamago]

Originally Posted by kou

actualy wouldnt need it.


i jumped to soon didnt look at the state my bad also didnt read whole post wouldnt need most of that stuff..but if you were closer.

who me?

i have a better turbo, better exhaust, better management then he does :D

but it's still a helluva deal


OP post on www.themicroteam.com

[ztrack157]

Thoe slotted mags were common in a 14X7 platform. I bought some for $5 for my 280z I had.

[Tamago]

Originally Posted by ztrack157

Thoe slotted mags were common in a 14X7 platform. I bought some for $5 for my 280z I had.

if they're 13X8 i'm interested. if not, i'm not lol

[kou]

Originally Posted by Tamago

who me?

i have a better turbo, better exhaust, better management then he does :D

but it's still a helluva deal


OP post on www.themicroteam.com

it is a good deal but if i could get it for $450.
my lack of knowledge of where each state is screwed me,i cant sit in the car that long i would be paralyzed.

[ztrack157]

I doubt they're are that wide. Thats almost round.

[Tamago]

Originally Posted by ztrack157

I doubt they're are that wide. Thats almost round.

i want something i can run at least a 255 on lol.. ideally a 275 would do it for me.. can't squeeze that on a 7wide :(

[ztrack157]

Kou thats not that bad of a road trip. take three days and stay at a motel 6