ZPIracing Yaris Pulley - Page 2 - Toyota Yaris Forums

ZPIracing · 05-15-2007, 11:31 AM

WOW!! We just wanted to run a special and let some people get a great deal on a great part and we started WWIII.

We once did offer our pulleys in a hard anodized option. A hard anodized option will add strength to the pulley. After a few years of offering this and with more testing and customers hitting 80-90k miles with a pulley we realized there is no point. A hard anodized coating will off extended strength. The anodized options offered by most are to appeal to the cosmetic side of the product on a part that you can not see.

Our pulleys are CAD designed & CNC'd from 6061 Aluminum billet they are built better than the OEM pulleys they replace. We do not offer them in any other size other than stock to prevent any negative affect on a street car. We do not offer a pulley set because to power gained from these in OEM size is minimal at best. Power can be found in running an underdrive pulley but the potential ill affects of doing so are not worth it in my opinion.

We offer a 10year warranty on our pulleys against defect most of you will not have this car that long and the pulley will more than likely last longer than the engine so we have no fear. If we thought anodized was a viable beneficial option we would offer it, we do not so we don’t.

eTiMaGo · 05-15-2007, 01:51 PM

yes, better snip this at the bud. No matter what, guys, this is a pretty god deal on this particular piece of equipment.

05-15-2007, 01:51 PM	#2
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	yes, better snip this at the bud. No matter what, guys, this is a pretty god deal on this particular piece of equipment. __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
ZPIracing Yaris Exhaust	ZPIracing	Performance Modifications	34	03-15-2007 02:29 PM
ZPIracing Crank Pulley NEW PRODUCT	ZPIracing	Performance Modifications	16	02-22-2007 04:21 PM

05-15-2007, 11:31 AM	#1
ZPIracing Drives: Scions Join Date: Feb 2007 Location: Louisville, KY Posts: 55	WOW!! We just wanted to run a special and let some people get a great deal on a great part and we started WWIII. We once did offer our pulleys in a hard anodized option. A hard anodized option will add strength to the pulley. After a few years of offering this and with more testing and customers hitting 80-90k miles with a pulley we realized there is no point. A hard anodized coating will off extended strength. The anodized options offered by most are to appeal to the cosmetic side of the product on a part that you can not see. Our pulleys are CAD designed & CNC'd from 6061 Aluminum billet they are built better than the OEM pulleys they replace. We do not offer them in any other size other than stock to prevent any negative affect on a street car. We do not offer a pulley set because to power gained from these in OEM size is minimal at best. Power can be found in running an underdrive pulley but the potential ill affects of doing so are not worth it in my opinion. We offer a 10year warranty on our pulleys against defect most of you will not have this car that long and the pulley will more than likely last longer than the engine so we have no fear. If we thought anodized was a viable beneficial option we would offer it, we do not so we don’t.