|
08-22-2006, 04:01 AM | #1 |
Drives: Yaris D4-D Join Date: Aug 2006
Location: Portugal
Posts: 52
|
[DIY] To remove logotipos of the mark
It gave to me in the head to remove the logotipos of the back of the Yaris. Something that already walked some time to make.
It delayed only 10 minutes. With a drier it is heated well soon to remove, later leaves with jeitinho not to scratch out the painting (I used a penknife). After removing soon, the remaining portion of the autocolante ribbon leaves that to be in the plate. If to cost to remove the autocolante ribbon heats with the drier that leaves easily. To use a desengurante to remove the remaining glue. E already is. |
08-22-2006, 06:37 AM | #2 |
Well the hard thing is to remove badges from the new one, cause they are placed in a hole on the chassis.
__________________
|
|
08-22-2006, 06:46 AM | #3 |
Drives: Yaris D4-D Join Date: Aug 2006
Location: Portugal
Posts: 52
|
They are not glue? It seems me that the Yaris word is equal to mine.
|
08-22-2006, 09:37 AM | #4 |
Super Moderator
|
The new Yaris emblems are GLUED.
Follow my How-To from last month... http://www.yarisworld.com/forums/sho...hlight=debadge |
08-22-2006, 10:22 AM | #5 |
Drives: Yaris D4-D Join Date: Aug 2006
Location: Portugal
Posts: 52
|
It seemed well me. The logos are equal.
|
08-22-2006, 11:55 AM | #6 |
Yeap they are glued, but the leave an empty place if removed...
@chris tnx for the link.
__________________
|
|
02-23-2007, 07:32 PM | #7 |
I removed mines just today... To be honest, I like a lot the way it looks now.....
__________________
Abdiel Hiram |
|
|
|