|
12-10-2011, 04:38 PM | #1 |
greddy ti-c question
I recently installed the exhaust and i was wondering where the dome shaped flange donut thing went. I cant seem to pry the ring off the factory mid pipe, and i can't screw on the bolts when i put the donut flange on top of the one on the mid pipe. If I don't use the supplied flange and just bolt it on I get a leak at that connection. What am I doing wrong?
|
|
12-11-2011, 04:02 PM | #2 |
Drives: 2008 Yaris HB Join Date: Oct 2008
Location: University Place,WA
Posts: 828
|
put a couple of screw drivers under the donut and it will pry off.
Yes a leak will occur without it,your gonna need to get some longer bolts for the can to bolt up,at least I did as mine did not fit well with the stock bolts. |
12-11-2011, 05:52 PM | #3 |
ok thanks, i'll give that a try
|
|
12-14-2011, 08:32 PM | #4 |
Drives: 2008 Yaris HB Join Date: Oct 2008
Location: University Place,WA
Posts: 828
|
Any luck,also may have to wiggle it around a bit to have good clearance from bumper,it clears very well but it also has a weird spot it can also sit on the hangers once the bolts are snug at the joint and it bangs the bumper....drove me nuts.
Now mine has melted the body kit,but it saves me from having to cut too much out...lol |
12-15-2011, 12:53 AM | #5 |
I haven't had a chance yet. Its been raining for the last couple days and i don't have a garage to work on it in. Im gonna ask my teacher tomorrow in class if i can work on it, but if that doesnt happen then im gonna try friday. I haven't had any problems with hitting the bumper, but i got mine used so it might be bent differently than yours.
|
|
12-16-2011, 12:51 AM | #6 |
Got it installed, took about 10 minutes to do everything.
|
|
12-16-2011, 09:45 AM | #7 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ That's the way!
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-17-2011, 12:45 AM | #8 |
Drives: 2008 Yaris HB Join Date: Oct 2008
Location: University Place,WA
Posts: 828
|
Hell yeah bro......glad you got it in first try....yeah rain is straining my mods this week too.
|
12-19-2011, 12:51 AM | #9 |
Drives: Grey 2007 yaris sedan Join Date: Dec 2011
Location: merritt island FL/Norfolk Naval base
Posts: 2
|
they still sell these?? i just tried buyin one not too long ago and they were discontinued for the yaris. i got an hks high power instead
|
12-19-2011, 10:13 AM | #10 |
I bought mine used but i found a couple online places selling them
|
|
12-19-2011, 12:30 PM | #11 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
12-19-2011, 10:02 PM | #12 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Greddy E-Manage Ultimate + Harness Kit | frownonfun | Items for Sale by private party | 6 | 11-06-2010 02:00 AM |
Greddy xB kit vs Greddy Fit kit | ellenbetty | Forced Induction Forum | 52 | 09-29-2009 08:42 PM |
Elusive Greddy Ti-C? | RShatchback | Performance Modifications | 36 | 06-05-2007 04:11 PM |
GReddy prototype = Free Exhaust! | Chris_Lum | California | 30 | 02-27-2007 10:13 PM |
Greddy Intellegent Informer | the_saint | In Car Entertainment + Electronics (audio / video / alarm) | 0 | 11-12-2006 04:26 PM |