FS: TRD Cold Air Intake (CAI). - Toyota Yaris Forums

Herbicidal · 08-26-2016, 05:20 PM

For either a hatchback or sedan. 2006 - 2011. Model number: PTR03-52070 I had it installed on my 2008 sedan 'S' combined with a Megan Racing 4-1 header (also for sale). I am including the filter "speed clean kit" with the fluid levels shown in the picture. The filter was just cleaned but not re-oiled. Installation instructions for the cold air intake are included. $195.

ern-diz · 08-26-2016, 07:26 PM

Curious; why are you selling?

Herbicidal · 08-27-2016, 01:55 PM

Short version: Smog Police.

Long version: Whenever I need to have the car smogged, I remove the CAI and replace with the stock air intake. So no issue there. However, this last time they finally noticed the Megan header so it did not pass visual. I replaced the header with my stock manifold and it passed.

So, I really like how the Megan header and the TRD CAI work together. But, I don't feel like putting the header back on now, then have to take it back off again the next time I have to smog it. Not that it is all that hard to do, just putting my time elsewhere. The TRD CAI is not that big a deal to take on and off, but without the header too, I might as well sell the CAI. I plan on using part of the proceeds to get a different head unit.

Oh well, it was fun while it lasted!

Exiwolfman · 08-27-2016, 05:19 PM

Quote:

Originally Posted by Herbicidal

Short version: Smog Police.

Long version: Whenever I need to have the car smogged, I remove the CAI and replace with the stock air intake. So no issue there. However, this last time they finally noticed the Megan header so it did not pass visual. I replaced the header with my stock manifold and it passed.

So, I really like how the Megan header and the TRD CAI work together. But, I don't feel like putting the header back on now, then have to take it back off again the next time I have to smog it. Not that it is all that hard to do, just putting my time elsewhere. The TRD CAI is not that big a deal to take on and off, but without the header too, I might as well sell the CAI. I plan on using part of the proceeds to get a different head unit.

Oh well, it was fun while it lasted!

Where about are u located, never had any problems with smog test and aftermarket parts..car passes each time here in Ontario Canada.

Sent from my Nexus 5X using Tapatalk

WeeYari · 08-27-2016, 08:56 PM

He's in California where part of the smog test is a visual inspection of the vehicle. Don't do visual here in Ontario. Just hook up to computer and either pass or fail.

Exiwolfman · 08-27-2016, 08:57 PM

Quote:

Originally Posted by WeeYari

He's in California where part of the smog test is a visual inspection of the vehicle. Don't do visual here in Ontario. Just hook up to computer and either pass or fail.

We have it easy...for now lol

Sent from my Nexus 5X using Tapatalk

Herbicidal · 09-01-2016, 09:35 PM

Now asking $175.

vivalaflam · 09-12-2016, 01:19 PM

How much does this weigh? Asking for shipping quote

Herbicidal · 09-12-2016, 06:24 PM

Hello, I will get the shipping weight for you tonight.

Herbicidal · 09-12-2016, 10:15 PM

Since I'm not exactly sure where you are in Greece, here is the shipping weight and dimensions coming from my zip code of 95747 in CA, USA.

Weight: 3 pounds, 11 ounces (not including the oiling kit, won't fit in the box). Dimensions in inches: 14 3/4 x 7 1/2 x 8 1/4

Herbicidal · 09-22-2016, 11:55 AM

For my Yaris brethren, if you're interested please make me a realistic offer (no low ballers) and I'll consider it. Rather have someone be able to use it than just sitting in a box in my garage. Thanks!

vivalaflam · 09-22-2016, 06:49 PM

Hi, sorry for taking too long, I've been busy. Turns out shipping would be sky high. Good luck selling it though. Only if I were living in the states... oh I'd get it in a heartbeat.

Herbicidal · 09-22-2016, 09:14 PM

Quote:

Originally Posted by vivalaflam

Hi, sorry for taking too long, I've been busy. Turns out shipping would be sky high. Good luck selling it though. Only if I were living in the states... oh I'd get it in a heartbeat.

No worries! Appreciate the reply and sorry to hear it's so expensive to ship.

Herbicidal · 10-06-2016, 05:59 PM

Bump.

henry217 · 10-09-2016, 11:47 PM

good item you had here.. do you have a pic of after you install it?

Herbicidal · 10-10-2016, 09:07 PM

Quote:

Originally Posted by henry217

good item you had here.. do you have a pic of after you install it?

Thanks. Had to dig deep into my photo album. The air filter part is tucked out of sight. Here you go:

Want to buy it? It would look even better in your car!

SirDigby · 10-11-2016, 08:30 PM

Quote:

Originally Posted by Herbicidal

Short version: Smog Police.

However, this last time they finally noticed the Megan header so it did not pass visual. I replaced the header with my stock manifold and it passed.

you should get a heatshield cover and mount it to the exhaust manifold. it would be pretty easy to hide...

Herbicidal · 10-12-2016, 12:57 PM

Quote:

Originally Posted by SirDigby

you should get a heatshield cover and mount it to the exhaust manifold. it would be pretty easy to hide...

I did think about that, but now that I've been 'tagged' as a violator they may look more closely at my car next time. Just not worth the risk. Hopefully someone outside of CA would be interested in buying it where you don't have to worry about a visual inspection. What is frustrating is that the car easily passed several smog tests before, so clearly the header is no worse than stock from an emissions standpoint but does provide more performance.

08-27-2016, 01:55 PM	#3
Herbicidal Just a Herbicidal maniac. View User's Garage Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008 Location: Roseville, CA - USA. Posts: 450	Short version: Smog Police. Long version: Whenever I need to have the car smogged, I remove the CAI and replace with the stock air intake. So no issue there. However, this last time they finally noticed the Megan header so it did not pass visual. I replaced the header with my stock manifold and it passed. So, I really like how the Megan header and the TRD CAI work together. But, I don't feel like putting the header back on now, then have to take it back off again the next time I have to smog it. Not that it is all that hard to do, just putting my time elsewhere. The TRD CAI is not that big a deal to take on and off, but without the header too, I might as well sell the CAI. I plan on using part of the proceeds to get a different head unit. Oh well, it was fun while it lasted! __________________ 2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace.

08-27-2016, 08:56 PM	#5
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,764	He's in California where part of the smog test is a visual inspection of the vehicle. Don't do visual here in Ontario. Just hook up to computer and either pass or fail. __________________

09-01-2016, 09:35 PM	#7
Herbicidal Just a Herbicidal maniac. View User's Garage Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008 Location: Roseville, CA - USA. Posts: 450	Now asking $175. __________________ 2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace.

09-12-2016, 01:19 PM	#8
vivalaflam Enthusiast Drives: 07 Yaris HB 1.3 (EU) Join Date: Nov 2014 Location: Greece Posts: 181	How much does this weigh? Asking for shipping quote __________________ Cheers, George.

09-12-2016, 06:24 PM	#9
Herbicidal Just a Herbicidal maniac. View User's Garage Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008 Location: Roseville, CA - USA. Posts: 450	Hello, I will get the shipping weight for you tonight. __________________ 2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace.

08-26-2016, 07:26 PM	#2
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	Curious; why are you selling?

09-12-2016, 10:15 PM	#10
Herbicidal Just a Herbicidal maniac. View User's Garage Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008 Location: Roseville, CA - USA. Posts: 450	Since I'm not exactly sure where you are in Greece, here is the shipping weight and dimensions coming from my zip code of 95747 in CA, USA. Weight: 3 pounds, 11 ounces (not including the oiling kit, won't fit in the box). Dimensions in inches: 14 3/4 x 7 1/2 x 8 1/4 __________________ 2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace.

09-22-2016, 11:55 AM	#11
Herbicidal Just a Herbicidal maniac. View User's Garage Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008 Location: Roseville, CA - USA. Posts: 450	For my Yaris brethren, if you're interested please make me a realistic offer (no low ballers) and I'll consider it. Rather have someone be able to use it than just sitting in a box in my garage. Thanks! __________________ 2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace.

09-22-2016, 06:49 PM	#12
vivalaflam Enthusiast Drives: 07 Yaris HB 1.3 (EU) Join Date: Nov 2014 Location: Greece Posts: 181	Hi, sorry for taking too long, I've been busy. Turns out shipping would be sky high. Good luck selling it though. Only if I were living in the states... oh I'd get it in a heartbeat. __________________ Cheers, George.

10-06-2016, 05:59 PM	#14
Herbicidal Just a Herbicidal maniac. View User's Garage Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008 Location: Roseville, CA - USA. Posts: 450	Bump. __________________ 2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace.

10-09-2016, 11:47 PM	#15
henry217 I've made a post! Drives: Vios Join Date: Sep 2013 Location: Malaysia Posts: 1	good item you had here.. do you have a pic of after you install it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simota CF650-6 Air Intake Review	invader166	Performance Modifications	16	12-21-2015 03:31 PM
Changing to cold air intake and insurance problem	ExtremeCold	Fuel Economy Forum	7	04-24-2011 07:20 PM
Changing to cold air intake and issurance problem	ExtremeCold	Performance Modifications	19	04-09-2011 04:15 PM
Cold Air Intake ?	pegcityrs	Performance Modifications	47	04-17-2006 07:43 AM