Yaris Motor Swap Thread *Read before posting swap threads* - Page 11 - Toyota Yaris Forums

RagnaCaT · 02-24-2015, 10:32 AM

Yes that's it... Although ECM wire orientation is on the opposite side of the Yaris.

Sent from my iPhone using Tapatalk

CoryM · 03-04-2015, 11:28 PM

Does anyone happen to have engine bay dimensions? I've looked in the collision repair part of the manual, but it's not from edge to edge.
Cheers.

fnkngrv · 04-24-2015, 05:45 PM

Are you still looking for dimensions Cory?

CoryM · 04-24-2015, 09:59 PM

Dimensions would be great if you have them. Otherwise I will post them when I measure (may be a while. Race-car is taking priority right now).

Cheers.

fnkngrv · 04-24-2015, 10:03 PM

Tell me exactly what you are looking for as the entire front end of mine is torn down.

CoryM · 04-27-2015, 05:30 PM

Sorry for the delayed reply. If the offer still stands, I would like the measurements in the photos. Looks like you already have white lines where the frame rails angle. All measurements are taken on top of the frame rails.
There is one more measurement I would like that isn't in the pictures. Could you also measure the square hole to the end of the frame rail (where the rad support bolts on.)?

Thanks for the help,
Cory

fnkngrv · 04-27-2015, 06:00 PM

I can see what I can do in the next day or two. The car is surrounded by kitchen cabinets :-)

fnkngrv · 04-27-2015, 06:01 PM

BTW, the white lines were where I was considering notching the frame rail for my IC piping, but we are going a different route.

CoryM · 04-27-2015, 06:23 PM

OK. I am in no hurry.
Cheers.

thebarber · 05-04-2015, 02:53 PM

Turbokits.com has 2zr turbo kits...

ilikerice · 05-05-2015, 04:29 AM

Couldn't find it. What is it listed under?

CrankyOldMan · 05-05-2015, 06:49 AM

Corolla. http://www.turbokits.com/Toyota/Corolla/Turbo_Kits/

WorkTL · 05-05-2015, 02:57 PM

Will that turbo fit a 3rd gen Yaris by any chance?

CrankyOldMan · 05-05-2015, 03:00 PM

Unfortunately, no. That kit is only for the 1.8L 2ZR-FE, which isn't available in the US as a factory option. It's entirely possible to do the swap though, just have to squeeze the details out of those that have successfully done it. =)

fnkngrv · 05-05-2015, 03:03 PM

The turbo would fit. It is rather small so wouldn't be a problem. You would have to do mods for the piping and manifold at the least.

WorkTL · 05-05-2015, 03:04 PM

Will the Scion xa turbo kit fit better?

fnkngrv · 05-05-2015, 03:07 PM

To a point, but you still will run into some modifications. That is why the Zage kit has been so popular. If not going the Zage it is probably just a smart thing to custom build.

fnkngrv · 05-05-2015, 03:09 PM

If I ever blow my built motor and manage to not be skinned alive by the wife I would try a 2gr swap. I think that would be epic. It is a hell of a mill. Makes my Highlander MOVE!

02-24-2015, 10:32 AM	#181
RagnaCaT HacKers WanTed! View User's Garage Drives: Yaris S HB & Yaris S SD Join Date: Aug 2007 Location: Villalba, Puerto Rico Posts: 435	Yes that's it... Although ECM wire orientation is on the opposite side of the Yaris. Sent from my iPhone using Tapatalk __________________ *R-CaT* Project Yar 2ZR

04-24-2015, 05:45 PM	#183
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	Are you still looking for dimensions Cory? __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

04-24-2015, 10:03 PM	#185
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	Tell me exactly what you are looking for as the entire front end of mine is torn down. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.* Last edited by fnkngrv; 04-24-2015 at 10:26 PM.

04-27-2015, 06:00 PM	#187
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	I can see what I can do in the next day or two. The car is surrounded by kitchen cabinets :-) __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

04-27-2015, 06:01 PM	#188
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	BTW, the white lines were where I was considering notching the frame rail for my IC piping, but we are going a different route. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

03-04-2015, 11:28 PM	#182
CoryM Drives: 2009 5-door, 5-speed Join Date: Sep 2011 Location: White Rock BC Posts: 687	Does anyone happen to have engine bay dimensions? I've looked in the collision repair part of the manual, but it's not from edge to edge. Cheers.

04-24-2015, 09:59 PM	#184
CoryM Drives: 2009 5-door, 5-speed Join Date: Sep 2011 Location: White Rock BC Posts: 687	Dimensions would be great if you have them. Otherwise I will post them when I measure (may be a while. Race-car is taking priority right now). Cheers.

04-27-2015, 06:23 PM	#189
CoryM Drives: 2009 5-door, 5-speed Join Date: Sep 2011 Location: White Rock BC Posts: 687	OK. I am in no hurry. Cheers.

05-04-2015, 02:53 PM	#190
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	Turbokits.com has 2zr turbo kits... __________________

05-05-2015, 04:29 AM	#191
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	Couldn't find it. What is it listed under? __________________ -Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."

05-05-2015, 06:49 AM	#192
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Corolla. http://www.turbokits.com/Toyota/Corolla/Turbo_Kits/

05-05-2015, 02:57 PM	#193
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	Will that turbo fit a 3rd gen Yaris by any chance?

05-05-2015, 03:00 PM	#194
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Unfortunately, no. That kit is only for the 1.8L 2ZR-FE, which isn't available in the US as a factory option. It's entirely possible to do the swap though, just have to squeeze the details out of those that have successfully done it. =)

05-05-2015, 03:03 PM	#195
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	The turbo would fit. It is rather small so wouldn't be a problem. You would have to do mods for the piping and manifold at the least. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

05-05-2015, 03:04 PM	#196
WorkTL View User's Garage Drives: 2013 Yaris LE Join Date: Sep 2014 Location: SoCal Posts: 216	Will the Scion xa turbo kit fit better?

05-05-2015, 03:07 PM	#197
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	To a point, but you still will run into some modifications. That is why the Zage kit has been so popular. If not going the Zage it is probably just a smart thing to custom build. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

05-05-2015, 03:09 PM	#198
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	If I ever blow my built motor and manage to not be skinned alive by the wife I would try a 2gr swap. I think that would be epic. It is a hell of a mill. Makes my Highlander MOVE! __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Official POLAR WHITE yaris thread	wushumasterku	Photo-Video-Media Gallery	477	08-27-2023 04:01 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM