JDM Yaris hatchback tail lights + other parts (need help to find them) (2008) - Page 2 - Toyota Yaris Forums

ACKING_QC · 11-24-2016, 10:01 PM

Quote:

Originally Posted by SirDigby

most likely will need re-pin on connector.

you posted "+other parts."
any other parts you are having issues locating?

Sadly yeahh.... OEM bmw e30 bottlecap wheels THIS!

RECARO seats I maybe found someone but I need to save 700 canadian bucks for it.......

SirDigby · 11-24-2016, 10:06 PM

I don't have anything on BM parts.

ACKING_QC · 11-24-2016, 10:07 PM

Quote:

Originally Posted by SirDigby

I don't have anything on BM parts.

does this means you have spare Toy parts ?

SirDigby · 11-24-2016, 10:26 PM

uh...I have a spare intake manifold. I could even modify it for 1zz throttle body. I can also do a light port job for better flow. I could even add a 1zz to it, if you want me to source one out. I can paint it. (if you check out my photo album, you can see what I did) i'd even cut the rivets off for chip swap. each one would cost more money. (I can give you materials to make TB spacer, but it took me so long to make it I don't want to make another one) I also have a RS lower grill, but it would not fit on a USDM/CDM bumper.US/C stock Toyota front emblem. US/C stock tail lamps.

that's the only spare parts I have at this time.

ACKING_QC · 11-24-2016, 10:33 PM

1zz throttlebody.. Everyone seems to have one.. What does it do to our beloved punchy egg?

SirDigby · 11-24-2016, 10:47 PM

well, the drive by wire limits the TB opening speed and it only opens to 80% at WOT. the 1zz is a little over 10% larger opening. it increases the flow where pedal feels more linier and increases flow at WOT. it's really a great improvement and feeling! (you do need to adjust the cold idle screw upon installation) I get a small stumble at about 2000 rpm on decal where the computer gets a little confused expecting to see one flow number, (mapping) but flow is higher. it just happens once in a great wile. sort of a "hick-up" feeling. not an issue really when the benefit is so much greater.

ACKING_QC · 11-25-2016, 07:26 AM

Hmm might have to dig one of them in a kenny u puul or similar.. Does a 2zz throttlebody does the same ? 'Cause if I remember I have a crashedout matrix in a kenny near me with a 2zz (tottally dead engine) but maybe the TB is still there..

SirDigby · 11-25-2016, 12:37 PM

oh sorry. that's what I meant. it's the matrix/vibe/corolla engine. 1.8 I got mine from a matrix.

ACKING_QC · 12-07-2016, 02:23 PM

Finally got my hands on some BMW BottleCap !!! if all my plans are going right, I'm buying them saturday !! gotta put some rubbers on it tho.... the guy who is selling me these awesome things said that it is 185/65/15 and from what I searched on the web, these are some 0 offset wheels .. considering I had 175/65/15 with (IDFK what the stock offset is but I think my mags were stock Yaris offset) I'm sure they will fit in aand they will be flush / maybe stick out a bit which will give her an awesome look I think

I stole the idea of BC Wheels from this guy who them on his Sedan Echo which looks like this : https://www.youtube.com/watch?v=RMkN0odpbDQ (8:28 for final result)

WeeYari · 12-07-2016, 02:37 PM

Stock offset is +42, so you'll be looking at nearly 2 inches pushed out further. These will go beyond flush!

ACKING_QC · 12-07-2016, 02:50 PM

Quote:

Originally Posted by WeeYari

Stock offset is +42, so you'll be looking at nearly 2 inches pushed out further. These will go beyond flush!

now THAT is good !

yarisugi · 12-07-2016, 05:21 PM

Quote:

Originally Posted by ACKING_QC

the guy who is selling me these awesome things said that it is 185/65/15 and from what I searched on the web, these are some 0 offset wheels .. considering I had 175/65/15 with (IDFK what the stock offset is but I think my mags were stock Yaris offset) I'm sure they will fit in aand they will be flush / maybe stick out a bit which will give her an awesome look I think

I doubt they are 15" tires since bottle caps are 14x6 et35.

ACKING_QC · 12-08-2016, 01:17 PM

How can I be sure of that ?

SirDigby · 12-08-2016, 08:46 PM

Quote:

Originally Posted by ACKING_QC

now THAT is good !

ehh....it can cause some breaking issues...

ACKING_QC · 12-09-2016, 11:24 AM

That is not like the gap will be extreme ... 2" isn't thats bad.. Look at the Camberghini on youtube.. Now THAT is dangerous.. Sick and lit af but dangerous!

ern-diz · 12-09-2016, 01:32 PM

Wow.

I can't stand camber, but Camberghini just became my newest fascination.

ACKING_QC · 12-10-2016, 11:42 AM

forget about the bottlecap.. asked the owner to send me other pics..... aluminium aws damaged.. and rear of the mags was burnt as helll... mybe it was his drifting mags.. but damn !

WeeYari · 12-10-2016, 12:33 PM

Good thing since you may have ended up looking something close to this. Maybe not quite as much poke since these wheels shown here are slightly wider. You definitely would not be lowering without stretch, camber, and fender rolling.

12-07-2016, 02:37 PM	#28
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,744	Stock offset is +42, so you'll be looking at nearly 2 inches pushed out further. These will go beyond flush! __________________

12-09-2016, 01:32 PM	#34
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	Wow. I can't stand camber, but Camberghini just became my newest fascination. __________________ On Instagram On Wheelwell

12-10-2016, 12:33 PM	#36
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,744	Good thing since you may have ended up looking something close to this. Maybe not quite as much poke since these wheels shown here are slightly wider. You definitely would not be lowering without stretch, camber, and fender rolling. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
WTB: 08 jdm tail lights	sr20-thoj	Willing to Buy by private party	6	04-14-2016 02:51 AM
2008 Yaris sedan - replacement tail lights?	Herbicidal	Cosmetic Modifications (Exterior/Interior)	5	04-13-2016 08:56 PM
Smoked Tail Lights for Yaris 2008	Chris Vee	Cosmetic Modifications (Exterior/Interior)	5	12-26-2013 08:17 AM

11-24-2016, 10:06 PM	#20
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	I don't have anything on BM parts.

11-24-2016, 10:26 PM	#22
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	uh...I have a spare intake manifold. I could even modify it for 1zz throttle body. I can also do a light port job for better flow. I could even add a 1zz to it, if you want me to source one out. I can paint it. (if you check out my photo album, you can see what I did) i'd even cut the rivets off for chip swap. each one would cost more money. (I can give you materials to make TB spacer, but it took me so long to make it I don't want to make another one) I also have a RS lower grill, but it would not fit on a USDM/CDM bumper.US/C stock Toyota front emblem. US/C stock tail lamps. that's the only spare parts I have at this time.

11-24-2016, 10:33 PM	#23
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	1zz throttlebody.. Everyone seems to have one.. What does it do to our beloved punchy egg?

11-24-2016, 10:47 PM	#24
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	well, the drive by wire limits the TB opening speed and it only opens to 80% at WOT. the 1zz is a little over 10% larger opening. it increases the flow where pedal feels more linier and increases flow at WOT. it's really a great improvement and feeling! (you do need to adjust the cold idle screw upon installation) I get a small stumble at about 2000 rpm on decal where the computer gets a little confused expecting to see one flow number, (mapping) but flow is higher. it just happens once in a great wile. sort of a "hick-up" feeling. not an issue really when the benefit is so much greater.

11-25-2016, 07:26 AM	#25
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	Hmm might have to dig one of them in a kenny u puul or similar.. Does a 2zz throttlebody does the same ? 'Cause if I remember I have a crashedout matrix in a kenny near me with a 2zz (tottally dead engine) but maybe the TB is still there..

11-25-2016, 12:37 PM	#26
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	oh sorry. that's what I meant. it's the matrix/vibe/corolla engine. 1.8 I got mine from a matrix.

12-07-2016, 02:23 PM	#27
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	Finally got my hands on some BMW BottleCap !!! if all my plans are going right, I'm buying them saturday !! gotta put some rubbers on it tho.... the guy who is selling me these awesome things said that it is 185/65/15 and from what I searched on the web, these are some 0 offset wheels .. considering I had 175/65/15 with (IDFK what the stock offset is but I think my mags were stock Yaris offset) I'm sure they will fit in aand they will be flush / maybe stick out a bit which will give her an awesome look I think I stole the idea of BC Wheels from this guy who them on his Sedan Echo which looks like this : https://www.youtube.com/watch?v=RMkN0odpbDQ (8:28 for final result)

12-08-2016, 01:17 PM	#31
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	How can I be sure of that ?

12-09-2016, 11:24 AM	#33
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	That is not like the gap will be extreme ... 2" isn't thats bad.. Look at the Camberghini on youtube.. Now THAT is dangerous.. Sick and lit af but dangerous!

12-10-2016, 11:42 AM	#35
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	forget about the bottlecap.. asked the owner to send me other pics..... aluminium aws damaged.. and rear of the mags was burnt as helll... mybe it was his drifting mags.. but damn !