The custom/aftermarket exhaust thread! [Pics + Videos]

[SilToYaris]

I love the sound of Blitz supercharger, Thats is on my buy list for sure...

[PopsCar]

Just installed it today. Nice deep Sound. Keeping the Silencer in for now. I felt the power increase right away.

[matthewai]

hey pops do you still have your stock axle back? if so are you willing to part with it? im on li only reason why im asking ive been looking for one

do you have any video of your set up now with the silencer ?

[chewychewbacca]

Hey guys, finally got around to getting some video of my Tanabe Medallion Touring Exhaust. It's everything I expected, sounds great, is not too loud, and everyone loves it.

http://www.youtube.com/watch?v=ROeri4U66ic

http://www.youtube.com/watch?v=N-kKwwjjmC8

I have the stock exhaust if anyone needs it.

[2mtech]

I'm down with the Tanabe Medalion Touring axle back too! Sounds SWEEEEEET (sorry, no video). It's got a nice, deep bass tone, definitely not too loud, and the immediate power increase was phenomenal! Took 10 minutes to install it...just jacked up the right rear corner and pulled the wheel. Easy peasy!

[SilToYaris]

I heared it already, my friend has one yes very nice sound, I would had one too if i had the money! ;)

[Yarisaur]

Originally Posted by PopsCar

Just installed it today. Nice deep Sound. Keeping the Silencer in for now. I felt the power increase right away.

What exhaust is this?? Its not the HK1, because I have an HK1 and it does not have a silencer..

[Dadams]

I want to do an exhaust mod to my yaris in the future but Im still pretty new to the tuning scene I want to do a dual exhaust system with double exhaust tips on each. right now I only have a single exhaust I was wondering if its possible at all to split a stock single into a dual.

[ilikerice]

for the duel exhaust, I'd like to make a suggestion. We did this with my roomies crx. We used a camero muffler like this one:

http://www.ebay.com/itm/WALKER-EXHAU...sories&vxp=mtr

and we had it custom made to the stock axle back and had them weld extra hangers and you can put any type of duel tip on each end if you wanted.

like this:

[thebarber]

Originally Posted by ilikerice

for the duel exhaust, I'd like to make a suggestion. We did this with my roomies crx. We used a camero muffler like this one:

http://www.ebay.com/itm/WALKER-EXHAU...sories&vxp=mtr

and we had it custom made to the stock axle back and had them weld extra hangers and you can put any type of duel tip on each end if you wanted.

like this:

see where the exhaust shrinks down to 1.75" after the resonator? if you're going custom, do yourself a favour and replace the exhaust back to there....you won't be disappointed (or buy my midpipe piece i had built from my part-out thread)

[ilikerice]

makes a very valid point. I keep forgetting that for some reason.. I havent done that yet because I need to keep the Cat on for my class.. ONE day I will drop it off at a exhaust shop and have them weld a pipe in from Cat to axle.

[malibuguy]

here's mine






Video;
http://www.youtube.com/watch?v=QPNziKtxzvU

i don't have a picture of it online, but i've since added a branch style resonator to it to pretty much eliminate my interior drone between 1600-2300rpm

[enviri]

Fujitsubo Wagolis for Vitz RS :) had it for more than a year and loving every minute! Cleanest welds I've ever seen.

[Dadams]

Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

[Herbicidal]

Originally Posted by Dadams

Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

Really? They cut mine off from the cat back and installed a new resonator and muffler. I now have a center exhaust. A competent muffler shop should be able to route it up to your roof if you want.

Stock:


Surgery:


Out with the old:


In with the new:


All done:

[WeeYari]

Originally Posted by Dadams

Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

This is what you want http://www.yarisworld.com/forums/sho...84&postcount=1

There is another one similar by a member, in PR I think, but I can't find it. It is not difficult to fabricate. All these guys are really doing is branching off of the existing tailpipe with a second one. Run the new one over to the left and weld on some tips.

[thebarber]

Originally Posted by ilikerice

makes a very valid point. I keep forgetting that for some reason.. I havent done that yet because I need to keep the Cat on for my class.. ONE day I will drop it off at a exhaust shop and have them weld a pipe in from Cat to axle.

keep the stock cat and res, theyre 2" thru

just cut off the rear which is 1.75" and get something fatter

or this: (see red line for exhaust path)

[ilikerice]

Originally Posted by thebarber

keep the stock cat and res, theyre 2" thru

just cut off the rear which is 1.75" and get something fatter

or this: (see red line for exhaust path)

thanks.. i was gonna drop the res. but if it is 2" anyways, why not keep it..

and according to your diagram.. you want me to put a side exhaust?

Dadams Thank for the suggestions I tried to take it in to an exhaust shop and he said all he could really do was change the tip? he said that the yaris' exhaust system itself was hard to work with or somethin

Id shop around.. Obviously that shop doesn't like custom work nor wants to make a profit.. Somebody will man up and do it. Find another muffler shop