5 Spd to 6 Spd Conversion DIY - Toyota Yaris Forums

rob323 · 03-28-2010, 09:36 PM

Good stuff

. I have about a million questions for you, but here's a couple to start off with:
1 Are the mounts in the same place on the C160?
2 Any mods required to the shifter cable ends or to the throw of the cables to prevent over selecting etc?
3 Why do you remove the neutral return spring?
4 When you change gear at redline in 1st, what revs does it drop to in 2nd?
5 Do you re-use the factory echo driveshafts?
6 Is the C160 diff an 8 bolt diff?
7 Did you have to re-shim anything?
8 Did you use any of the C150 bellhousing or casings or is it all C160 that's in there?

I'll stop there for now.

Cheers,
Rob.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Cruise Control FAQ (2006-2010 Yaris)	CTScott	DIY / Maintenance / Service	467	10-18-2022 10:20 AM
DIY (sorta) - RunStop Rear disc brake conversion	eTiMaGo	DIY / Maintenance / Service	17	07-02-2019 08:24 AM
DIY Change Your Interior Light Grey Panels to Black	KCALB SIRAY	DIY / Maintenance / Service	64	01-22-2015 01:25 PM
Xenon-Vision HID Conversion Kit - $120 Shipped/$160 Shipped for Slim Ballast	phu@xenon-vision	Sponsors Classifieds Area	8	03-06-2009 02:33 PM

03-28-2010, 09:36 PM	#6
rob323 Don't drive it, RALLY it! Drives: 1999 echo PRC rally car Join Date: Oct 2008 Location: Joyner, Brisbane Posts: 321	Good stuff . I have about a million questions for you, but here's a couple to start off with: 1 Are the mounts in the same place on the C160? 2 Any mods required to the shifter cable ends or to the throw of the cables to prevent over selecting etc? 3 Why do you remove the neutral return spring? 4 When you change gear at redline in 1st, what revs does it drop to in 2nd? 5 Do you re-use the factory echo driveshafts? 6 Is the C160 diff an 8 bolt diff? 7 Did you have to re-shim anything? 8 Did you use any of the C150 bellhousing or casings or is it all C160 that's in there? I'll stop there for now. Cheers, Rob.