|
|
01-21-2016, 11:02 AM | #1 | |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Quote:
|
|
01-21-2016, 04:37 AM | #2 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
I understand what your saying but can I suggest a bit of rewording... Try to do a step by step process in 1 post for the wiring with what you have acquired (yaris harness and yaris Trans).
-Then have a separate post if you use the yaris harness with xD trans, -another post for yaris trans with the xD harness, -and another post for the xD harness and xD trans. After that is done, if you could go ahead and mention corolla parts. You are mixing scenario's up in 2 different posts and I can see how this can get confusing and intimidating for someone who is a newbie with wiring. I used to work for Toyota and Lexus for 6 years, so its a bit easier for me to understand. Great job though. looks fun, I can't wait to do this to mine! I have been talking about doing this for a LOOONG time when I found out that the 2zr was the Yaris TS version.
__________________
-Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting." |
01-21-2016, 10:32 AM | #3 | |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
Quote:
I know you guys would prefer this diy be formatted a certain way, but I am sharing this info with you guys as I go.
__________________
www.Facebook.com/ArmstrongRacingPage www.youtube.com/c/ArmstrongRacing www.instagram.com/Armstrong_Racing http://www.wheelwell.com/profile/55f...35ac4a/garage/ Last edited by ArmstrongRacing; 01-21-2016 at 10:59 AM. |
|
01-24-2016, 12:00 PM | #4 | |
Drives: 2009 5-door, 5-speed Join Date: Sep 2011
Location: White Rock BC
Posts: 687
|
Quote:
Cheers. |
|
01-24-2016, 12:37 PM | #5 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
|
01-24-2016, 12:46 PM | #6 |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
This is exactly how I felt about this diy, there is so much going on I feared a step would get forgotten if I waited until it was completed.
|
01-24-2016, 02:11 PM | #7 | |
Drives: 07 Yaris 3 door Join Date: Feb 2013
Location: conyers ga
Posts: 87
|
Quote:
Would you mind posting the part # of the ECM you bought, and what it was for?(ie year make model and specific options) |
|
01-21-2016, 07:07 AM | #8 |
Drives: Yaris 07 HB Join Date: Apr 2011
Location: Sabana Grande, PR
Posts: 70
|
If I get a complete xD harness and use the Yaris trans, I only have to move the pins that you mention in post #48 to the correct location of the plugs ends and that its?
|
01-21-2016, 12:11 PM | #9 |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
There is no additional wiring involved in having an automatic vs manual transmission. If your car is auto and you keep it auto, the auto trans Xd harness and ECM have the same pin locations at the transmission plugs. There is only one wire to ground, Ill get to that later
__________________
www.Facebook.com/ArmstrongRacingPage www.youtube.com/c/ArmstrongRacing www.instagram.com/Armstrong_Racing http://www.wheelwell.com/profile/55f...35ac4a/garage/ Last edited by ArmstrongRacing; 01-25-2016 at 11:29 PM. |
01-21-2016, 10:48 PM | #10 | |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Quote:
Where I'm coming from is 2010 Yaris 5spd manual without ABS So, just like some of the others, as I read through your helpful posts.....I try to harvest the info for my own situation (ie: which mounts / tranny / axles / wiring etc...) Will |
|
01-22-2016, 01:51 AM | #11 |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
I finished all of my Corolla harness soldering today. I connected the battery and switched on the ignition and I immediately got a code for P2770-Torque Converter Clutch(auto trans).....Im not sure if this is a result of the hydrolock or what, looks like I need to do a bit more research...
Tomorrow I will finish my MAF wiring and fire it up...hopefully all goes well.
__________________
www.Facebook.com/ArmstrongRacingPage www.youtube.com/c/ArmstrongRacing www.instagram.com/Armstrong_Racing http://www.wheelwell.com/profile/55f...35ac4a/garage/ Last edited by ArmstrongRacing; 01-22-2016 at 09:27 AM. |
01-22-2016, 12:46 PM | #12 | |
Drives: 07 Yaris 3 door Join Date: Feb 2013
Location: conyers ga
Posts: 87
|
Quote:
|
|
01-22-2016, 12:52 PM | #13 | |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
Quote:
Update: (auto trans only) I've found the harness discrepancy causing my P2770 code. The Xd ECM normally receives a signal from the SL solenoid on pin#58, but my Corolla harness has that wire on 57. Also the Corolla/Xd valve body's ground this solenoid internally vs the Yaris auto trans grounding this solenoid at the ECM. I just need to swap pins 57 to 58 and ground pin #9 at the valve body connector.
__________________
www.Facebook.com/ArmstrongRacingPage www.youtube.com/c/ArmstrongRacing www.instagram.com/Armstrong_Racing http://www.wheelwell.com/profile/55f...35ac4a/garage/ Last edited by ArmstrongRacing; 01-24-2016 at 12:55 PM. |
|
01-24-2016, 02:15 PM | #14 | |
Drives: 07 Yaris 3 door Join Date: Feb 2013
Location: conyers ga
Posts: 87
|
Quote:
|
|
01-22-2016, 02:20 PM | #15 |
Drives: 2007 toyota yaris s Join Date: Oct 2015
Location: cool california
Posts: 13
|
So what did you need for cali smog? You just had to call ahead and tell them your plans and that's it? Then just make sure it has no check engine, cat, and that's about it? I'm very interested in doing this swap as my yaris tranny is getting iffy and the engine has 150k so it is in the cards.
|
01-22-2016, 02:36 PM | #16 |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
Yes I called the BAR and they said no CEL, and all stock components.
|
01-23-2016, 04:16 PM | #17 |
Data doesn't lie
Drives: That Scrappy 2zrVios Join Date: Oct 2014
Location: San Diego
Posts: 761
|
This is the ECM I ordered from Ebay...I just have to finish up some wiring and Ill have a engine startup video.
|
01-24-2016, 08:36 AM | #18 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
what's the engine immobilizer situation and how are you addressing it?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
unusual engine swap | CoryM | Performance Modifications | 26 | 10-09-2015 12:17 AM |
***How to Choose an Exhaust System*** | Hussain-Vtec | Performance Modifications | 16 | 03-16-2014 08:02 AM |
engine swap | djhuddy2442 | Performance Modifications | 6 | 04-11-2013 01:05 AM |
Boost Gets U Laid eh? Count me In | yaris2010RS | Forced Induction Forum | 128 | 02-02-2013 04:57 PM |
Scion/Yaris engine swap | mrrock | Performance Modifications | 1 | 03-02-2011 06:56 PM |