NST (NonStopTuning) Pulleys. Info, Specs, User Data... - Page 17 - Toyota Yaris Forums

NonStopTuning · 11-27-2008, 06:36 PM

Happy Thanksgiving everyone!

whooppee777 · 12-02-2008, 06:47 PM

i know this was discussed once before, and was probably lost due to the hack.

i will be boosted with the blitz supercharger most likely after christmas and i was wondering if a different pulley could be made or maybe even a light weight pulley could be made for the blitz supercharger? if a pulley were made to make more boost wouldnt u have to retune whatever fuel managment comes with the blitz kit?

NonStopTuning · 12-03-2008, 12:34 AM

Please contact us when you have your BLITZ charger installed and I would be more than happy to chat with you and answer all your questions.

There are options for the SC.

whooppee777 · 12-03-2008, 06:53 PM

well if you made a pulley you would probably need a pulley from the kit in order to make a different one correct? and if i install mine my pulley it isnt coming off cuz i this is my only daily driver. so if anything could be done you would need the pulley before i install it. if you used me as a test dummy. perhaps i could talk cali yaris to send me the pulley from my kit he is holding for me so u could possibly get a head start. would that be cool?

but i am right in needing to have the Fuel management remapped if i went with a different size pulley right? cuz i would b changing boost levels and consequently needing more fuel.

but if you made a light weight pulley, in a bitchn anodized red to match my other lite pulleys, boost levels wouldnt change. just a slight increase in responsivness of the supercharger kicking in right?

NonStopTuning · 12-04-2008, 11:49 PM

I have already seen the BLITZ SC pulley. This pulley has a clutch type mechanism attached to it, and can not be reproduced feasibly in small numbers.

We are looking at options for raising boost via the crank pulley. Using a slightly larger crank pulley would raise boost, and could possibly work without needing any reprogramming of the ECU. We won't know until we have a test car to play with.

This is all just theoretical at this point... we won't know until we are able to try, which means we would need someone to step up to the plate and help out. Like I said, contact us once your SC is in your car and is fully operational.

Thanks again!

mikenacarato · 12-08-2008, 08:27 PM

is there a how to on the other 2 pulleys?

NonStopTuning · 12-08-2008, 11:52 PM

Quote:

Originally Posted by mikenacarato

is there a how to on the other 2 pulleys?

There used to be a full DIY guide. Maybe it was lost during the hack?!?!

mikenacarato · 12-09-2008, 12:04 AM

oh well, im getting ready to do these in 5 mins. if i had a camera i would take pics for another DIY

mikenacarato · 12-09-2008, 02:54 AM

well got them on and i have to say, looks, sounds, and feels great! Thanks NST!

NonStopTuning · 12-09-2008, 12:00 PM

Glad to hear you like them sir!

Enjoy your newfound throttle response and power

NonStopTuning · 12-18-2008, 12:02 AM

Would anyone else care to chime in?!

TheRealEnth · 12-18-2008, 01:26 AM

I was looking over a lot of posts and still havent got an answer, Wondering if any1 with an automatic has purchased the NST Pulley's to tell me if it feels much nicer?

Jerkratt · 12-18-2008, 03:17 AM

my 07 was automatic and i had the pulleys on it.. was pepier and a little quieter aswell didnt have to grrrrrrrrr uphill anymore lol

TheRealEnth · 12-18-2008, 07:33 AM

Quote:

my 07 was automatic and i had the pulleys on it.. was pepier and a little quieter aswell didnt have to grrrrrrrrr uphill anymore lol

thanks

NonStopTuning · 12-18-2008, 03:05 PM

Quote:

Originally Posted by TheRealEnth

I was looking over a lot of posts and still havent got an answer, Wondering if any1 with an automatic has purchased the NST Pulley's to tell me if it feels much nicer?

We actually have quite a few automatic owners out there...
unfortunately about 30 pages of the testimonies and feedback was lost in the recent hack.

The principles of weight reduction and underdrive apply in both auto and manual cars.
Dropping weight from the rotating assembly = increase in response and power delivery.

Rihanna · 12-31-2008, 07:13 PM

hello NST, i'm from indonesia, and want to buy ur product by help of my friend.
could you sell the product at ebay ?, because my friend has ebay account. but he live at US, michigan state exactly.
if u dont have ebay account/id. could u tell me the way to buy on delivery to michigan ?

my questions are which product i should buy , i saw at ur NST website, there are 3 types
1.CR - lite crank pulley,
2. 10% underdrive crank pulley ,
3.WP-Lite &
ALT-lite KIT

which one should i choose ? and what is the differences ? could u explain to me, because i really confused.
my car is AT 1.5 Gasoline 1NZFE yaris built from thailand.

NonStopTuning · 12-31-2008, 10:37 PM

Quote:

Originally Posted by Rihanna

hello NST, i'm from indonesia, and want to buy ur product by help of my friend.
could you sell the product at ebay ?, because my friend has ebay account. but he live at US, michigan state exactly.
if u dont have ebay account/id. could u tell me the way to buy on delivery to michigan ?

my questions are which product i should buy , i saw at ur NST website, there are 3 types
1.CR - lite crank pulley,
2. 10% underdrive crank pulley ,
3.WP-Lite &
ALT-lite KIT

which one should i choose ? and what is the differences ? could u explain to me, because i really confused.
my car is AT 1.5 Gasoline 1NZFE yaris built from thailand.

Thank you for your interest in our site and products, we appreciate it.

Our most popular items are the following...

NST09010 Underdrive Crank Pulley. This pulley is intended for naturally aspirated or turbo models and will provide the most gains.

NST09025K Alternator and Water Pump Pulley Kit. This kit includes two lightweight pulleys and can be used with NST09010.

You can select these items (or your friend in Michigan) and purchase them from our website at the following page...

http://www.nonstoptuning.com/pKitToyYaris.htm

Our website is programmed to accept payments via PayPal, Credit Card, or Debit Card. Shipping is automatically calculated at the time of your order and packages ship via USPS Priority Mail. Your friend can also call us Monday through Friday if he/she would like to place a phone order.

Furthermore, this thread is FULL of information regarding these pulleys, their benefits and characteristics, and frequently asked questions.

CASTREX · 01-01-2009, 04:51 PM

Hey Mike,

Just a little report for your records.

The NST SSK does NOT fit in the new (2009) 6 speed tranny.

The new Yaris TS comes equipped with a brand new 6speed MT and I verified last week that the SSK wont work on this new tranny.

I believe that Toyota will be using this same tranny also for the Euro 2009 Yaris 1.3L and other compact models.

11-27-2008, 06:36 PM	#289
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Happy Thanksgiving everyone! __________________ MIKE @ NST www.NonStopTuning.com

12-02-2008, 06:47 PM	#290
whooppee777 I used to have 1700 posts View User's Garage Drives: 2008 Yaris Hatch Join Date: Apr 2007 Location: Maryland Posts: 808	i know this was discussed once before, and was probably lost due to the hack. i will be boosted with the blitz supercharger most likely after christmas and i was wondering if a different pulley could be made or maybe even a light weight pulley could be made for the blitz supercharger? if a pulley were made to make more boost wouldnt u have to retune whatever fuel managment comes with the blitz kit? __________________ *First Boosted Yaris On The East Coast*

12-03-2008, 12:34 AM	#291
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Please contact us when you have your BLITZ charger installed and I would be more than happy to chat with you and answer all your questions. There are options for the SC. __________________ MIKE @ NST www.NonStopTuning.com

12-03-2008, 06:53 PM	#292
whooppee777 I used to have 1700 posts View User's Garage Drives: 2008 Yaris Hatch Join Date: Apr 2007 Location: Maryland Posts: 808	well if you made a pulley you would probably need a pulley from the kit in order to make a different one correct? and if i install mine my pulley it isnt coming off cuz i this is my only daily driver. so if anything could be done you would need the pulley before i install it. if you used me as a test dummy. perhaps i could talk cali yaris to send me the pulley from my kit he is holding for me so u could possibly get a head start. would that be cool? but i am right in needing to have the Fuel management remapped if i went with a different size pulley right? cuz i would b changing boost levels and consequently needing more fuel. but if you made a light weight pulley, in a bitchn anodized red to match my other lite pulleys, boost levels wouldnt change. just a slight increase in responsivness of the supercharger kicking in right? __________________ *First Boosted Yaris On The East Coast*

12-04-2008, 11:49 PM	#293
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	I have already seen the BLITZ SC pulley. This pulley has a clutch type mechanism attached to it, and can not be reproduced feasibly in small numbers. We are looking at options for raising boost via the crank pulley. Using a slightly larger crank pulley would raise boost, and could possibly work without needing any reprogramming of the ECU. We won't know until we have a test car to play with. This is all just theoretical at this point... we won't know until we are able to try, which means we would need someone to step up to the plate and help out. Like I said, contact us once your SC is in your car and is fully operational. Thanks again! __________________ MIKE @ NST www.NonStopTuning.com

12-08-2008, 08:27 PM	#294
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	is there a how to on the other 2 pulleys?

12-09-2008, 12:04 AM	#296
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	oh well, im getting ready to do these in 5 mins. if i had a camera i would take pics for another DIY

12-09-2008, 02:54 AM	#297
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	well got them on and i have to say, looks, sounds, and feels great! Thanks NST!

12-09-2008, 12:00 PM	#298
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Glad to hear you like them sir! Enjoy your newfound throttle response and power __________________ MIKE @ NST www.NonStopTuning.com

12-18-2008, 12:02 AM	#299
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Would anyone else care to chime in?! __________________ MIKE @ NST www.NonStopTuning.com

12-18-2008, 01:26 AM	#300
TheRealEnth Beast View User's Garage Drives: 2007 Blz Blu LB Join Date: Oct 2008 Location: Miami, FL Posts: 1,365	I was looking over a lot of posts and still havent got an answer, Wondering if any1 with an automatic has purchased the NST Pulley's to tell me if it feels much nicer? __________________ One you've taken a yaris for a spin, there's no turning back. Its a Chao!!!

12-18-2008, 03:17 AM	#301
Jerkratt View User's Garage Drives: 08 Yaris Liftback S (RIP 07) Join Date: Apr 2007 Location: Fair Lawn, NJ Posts: 1,378	my 07 was automatic and i had the pulleys on it.. was pepier and a little quieter aswell didnt have to grrrrrrrrr uphill anymore lol __________________ "It hurts more when its wet"

12-31-2008, 07:13 PM	#304
Rihanna View User's Garage Drives: Toyota Hatch Yaris Join Date: Oct 2008 Location: I love Indonesia Posts: 2	hello NST, i'm from indonesia, and want to buy ur product by help of my friend. could you sell the product at ebay ?, because my friend has ebay account. but he live at US, michigan state exactly. if u dont have ebay account/id. could u tell me the way to buy on delivery to michigan ? my questions are which product i should buy , i saw at ur NST website, there are 3 types 1.CR - lite crank pulley, 2. 10% underdrive crank pulley , 3.WP-Lite & ALT-lite KIT which one should i choose ? and what is the differences ? could u explain to me, because i really confused. my car is AT 1.5 Gasoline 1NZFE yaris built from thailand.

01-01-2009, 04:51 PM	#306
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	Hey Mike, Just a little report for your records. The NST SSK does NOT fit in the new (2009) 6 speed tranny. The new Yaris TS comes equipped with a brand new 6speed MT and I verified last week that the SSK wont work on this new tranny. I believe that Toyota will be using this same tranny also for the Euro 2009 Yaris 1.3L and other compact models.