NST (NonStopTuning) Pulleys. Info, Specs, User Data... - Page 20 - Toyota Yaris Forums

Rudysin507 · 02-06-2009, 10:48 AM

Now this is my question.... is there any of those pulleys available for the 1st generation Yaris or Echo (whatever makes you happy)? we have a small crew down in Panama city, Panama very interested on that but we are not sure if we get them, are they going to fit or to work in our engines? 1.3L 2nz-fe

NonStopTuning · 02-07-2009, 02:32 PM

Quote:

Originally Posted by CtrlAltDefeat

... and now I've had a few days with a properly working car and I really only have one word for the underdrive pulley...

WOW!

It's hard to believe one little upgrade could make such a difference... It revs better, accelerates faster, even sounds nicer, I think. One thing I know, the shift points have moved. With the stock pulley, shifting into 2nd happened at 30mph and shifting into 3rd at 60mph. It's changed to 33-34mph and 63-64mph respectively. And getting to those shift points is much quicker. In stock form hitting 85mph was like an event. (that's my video btw) Now I find myself pulling it back from 80 all the time... I down shift to pass someone, and suddenly I'm on my way towards 90... To tell the truth, with stock suspension I think it's almost a little scary!

I took my coworkers to lunch yesterday, and thought it was kinda funny to watch their heads snap backwards.

I think I'm going to take another 0-85 video when I get a chance and post it here...(maybe after my springs are installed) In closing I must say

NST FTW!

Glad you are enjoying your pulley!!!

NonStopTuning · 02-07-2009, 02:35 PM

Quote:

Originally Posted by Rudysin507

Now this is my question.... is there any of those pulleys available for the 1st generation Yaris or Echo (whatever makes you happy)? we have a small crew down in Panama city, Panama very interested on that but we are not sure if we get them, are they going to fit or to work in our engines? 1.3L 2nz-fe

Yes, these same pulleys fit the 1.3L. Many international Yaris owners are using these pulleys.

Good luck and have fun with all your projects down there

1NZYaris1 · 02-07-2009, 04:38 PM

Quote:

Originally Posted by Rudysin507

Now this is my question.... is there any of those pulleys available for the 1st generation Yaris or Echo (whatever makes you happy)? we have a small crew down in Panama city, Panama very interested on that but we are not sure if we get them, are they going to fit or to work in our engines? 1.3L 2nz-fe

My 3rd gen yaris is running a 2nz-fe and i an running all the NST pullies
and they are great.

kimo · 02-07-2009, 08:25 PM

Whats is the diffrence in performance between the light CR and the 10% under light CR pulley.

NonStopTuning · 02-08-2009, 11:54 PM

Quote:

Originally Posted by kimo

Whats is the diffrence in performance between the light CR and the 10% under light CR pulley.

CR-Lite can be used in n/a, turbo, and supercharged applications.

Underdrive Crank Pulley is designed for n/a, and turbo, and will free more power for these applications.

Rudysin507 · 02-09-2009, 11:06 AM

Quote:

Originally Posted by NonStopTuning

Yes, these same pulleys fit the 1.3L. Many international Yaris owners are using these pulleys.

Good luck and have fun with all your projects down there

Thank you guys! it looks like i have a new project to work on!! looking forward to see results.

auxmike · 02-09-2009, 11:00 PM

Can these things endure years of roadsalt from nasty NE winters?

supmet · 02-09-2009, 11:07 PM

Quote:

Originally Posted by auxmike

Can these things endure years of roadsalt from nasty NE winters?

I'd think anodized aluminum would handle it better.

You might wanna check on something else if you are getting salt that far up into your engine compartment though :D

1NZYaris1 · 02-10-2009, 12:41 AM

You should not have a problem at all ,
as i have use anodized pullies for years on boat -anchor whinches

whiteghetto · 02-10-2009, 07:48 PM

wow, way to much info here.
But I don't think this question has been answered
I can either get the light crank pulley or they 2 pulley set from cali yaris.
what would yeild more benefits?

2007 LB w/CAI. and a small sub amp (about 600 watts)
Will also be getting a rear sway bar, just want to know what pulley to order :)

any help or info is greatly appreciated

NonStopTuning · 02-10-2009, 10:23 PM

Quote:

Originally Posted by whiteghetto

wow, way to much info here.
But I don't think this question has been answered
I can either get the light crank pulley or they 2 pulley set from cali yaris.
what would yeild more benefits?

2007 LB w/CAI. and a small sub amp (about 600 watts)
Will also be getting a rear sway bar, just want to know what pulley to order :)

any help or info is greatly appreciated

I will copy and paste the answer I gave you via Email earlier tonight...

Quote:

I have a, hopefully, pretty straigtforward question.
I am wanting to know what setup would provide better results in MPG and HP

1) crank light pulley(NST09010)
2) Pulley Combo (NST09025K)

My car in a nutshell
2007 Yaris LB w/auto w/CAI w/600 watt sub amp

thanks for the info :)

John

Hi John,

Thank you for your interest in our site and products, we appreciate it.

The setup that would provide the best results in MPG, HP, TQ, and throttle
response would be one that would provide the MOST weight reduction along with a
small amount of underdriving of the accessories.

So you should consider NST09010 Underdrive Crank Pulley + NST09025K Alternator
and Water Pump Pulley Kit. The more NST pulleys, the better the overall result.

Thanks again, and good luck!

CASTREX · 02-10-2009, 11:41 PM

Quote:

Originally Posted by NonStopTuning

Yes, these same pulleys fit the 1.3L. Many international Yaris owners are using these pulleys.

Good luck and have fun with all your projects down there

Quote:

Originally Posted by Rudysin507

Thank you guys! it looks like i have a new project to work on!! looking forward to see results.

Hold your horses guys!!!

The 1.5L and the 1.3L pulleys are the same as long as they are the same generation Yaris.

For the first generation Yaris (echo) either the 1.5 or the 1.3 you need to look for the Scion xB (first gen) pulleys.

Your cars have a double belt design crank pulley that is not a match with the Yaris pulleys offered by NST.

However, don't feel bad... NST has pulleys for the first gen xB that should fit your cars!

NonStopTuning · 02-10-2009, 11:53 PM

I don't know how many times I have had to type this same thing in this same thread

International customers with TWO-ROW crank pulleys in their cars need to order from our xA/xB page...
http://www.nonstoptuning.com/pKitToySciXAXB.htm

The majority of the rest with SINGLE-ROW crank pulleys can order from our Yaris page...
http://www.nonstoptuning.com/pKitToyYaris.htm

No doubt we will be discussing this again in a few pages

NonStopTuning · 02-13-2009, 02:50 PM

Anyone else?

xen555 · 02-24-2009, 07:00 PM

Quote:

Originally Posted by NonStopTuning

Anyone else?

yeaah yeahh mee!!!
im ready to make an order for my little red one!!!
how long take the shipping to puerto rico in your experience??
im very anxious for one of those pulleys!!!

NonStopTuning · 02-24-2009, 11:19 PM

Quote:

Originally Posted by xen555

yeaah yeahh mee!!!
im ready to make an order for my little red one!!!
how long take the shipping to puerto rico in your experience??
im very anxious for one of those pulleys!!!

Shipping to PR is the same as any US state via USPS Priority Mail. 2-3 day service for only about $10.

You can place your order with us on our website whenever you're ready

xen555 · 02-25-2009, 09:59 AM

Quote:

Originally Posted by NonStopTuning

Shipping to PR is the same as any US state via USPS Priority Mail. 2-3 day service for only about $10.

You can place your order with us on our website whenever you're ready

i did it last night!!!

ps: i dont remeber if i specified the color... i want the red !!! thanks

02-09-2009, 11:00 PM	#350
auxmike Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008 Location: LI, New Yawk Posts: 2,063	Can these things endure years of roadsalt from nasty NE winters? __________________ Never take eyes off opponent - Bruce Lee

02-10-2009, 12:41 AM	#352
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	You should not have a problem at all , as i have use anodized pullies for years on boat -anchor whinches __________________ http://www.microimageonline.com/forums/index.php

02-10-2009, 07:48 PM	#353
whiteghetto Drives: '07 blazing blue hatch Join Date: Oct 2008 Location: portland oregon Posts: 88	wow, way to much info here. But I don't think this question has been answered I can either get the light crank pulley or they 2 pulley set from cali yaris. what would yeild more benefits? 2007 LB w/CAI. and a small sub amp (about 600 watts) Will also be getting a rear sway bar, just want to know what pulley to order :) any help or info is greatly appreciated __________________ 2007 HB Blazing Blue

02-10-2009, 11:53 PM	#356
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	I don't know how many times I have had to type this same thing in this same thread International customers with TWO-ROW crank pulleys in their cars need to order from our xA/xB page... http://www.nonstoptuning.com/pKitToySciXAXB.htm The majority of the rest with SINGLE-ROW crank pulleys can order from our Yaris page... http://www.nonstoptuning.com/pKitToyYaris.htm No doubt we will be discussing this again in a few pages __________________ MIKE @ NST www.NonStopTuning.com

02-13-2009, 02:50 PM	#357
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Anyone else? __________________ MIKE @ NST www.NonStopTuning.com

02-06-2009, 10:48 AM	#343
Rudysin507 View User's Garage Drives: Yaris HB 2005 Join Date: Dec 2008 Location: PTY, Panama Posts: 181	Now this is my question.... is there any of those pulleys available for the 1st generation Yaris or Echo (whatever makes you happy)? we have a small crew down in Panama city, Panama very interested on that but we are not sure if we get them, are they going to fit or to work in our engines? 1.3L 2nz-fe

02-07-2009, 08:25 PM	#347
kimo Drives: Honds City 2005 Join Date: Oct 2008 Location: Egypt Posts: 10	Whats is the diffrence in performance between the light CR and the 10% under light CR pulley.