Fog Lamp Cover Installation following incident - Toyota Yaris Forums

nielandm · 07-05-2012, 11:47 AM

Okay so what happened is I was driving down a 55 mile an hour stretch in central New Hampshire. My highbeams were on and I had a great vision on the road. Then about 30 feet in front of me, maybe less, a racoon ran out in front of me and I hit him. The front passenger side suffered minor damage. A crack in the bumper, since the incident has been super glued and held up well, and also the fog lamp cover disappeared and was unable to be found. So I bought a new one, it fits, or will fit once the area is fixed up. I'm not entirely sure on how to go about the installation of the cover. If anyone has any tips, advice, or experience with this kind of a problem, please let me know!

Pictures below.

1.5 · 07-05-2012, 11:52 AM

What do you mean by cover? Is it the lens? Or is it the entire lamp?

If lens, you are going to have to open the lamp and seperate it and just placed the new lens and then seal it back up.

If you purchased the entire lamp, you will need to take the front bumper off, or pull back your wheel well liner enough to reach the old lamp with a screw driver. Remove the 2-4 screws that secure the lamp to the back of the bumper, twist the bulb and pull it out and slide it in the new lamp. Twist and lock it then reattach the lamp to the bumper via those same screws and then put the bumper/wheel well back on and that should do it.

nielandm · 07-05-2012, 12:01 PM

I just uploaded pictures, sorry it took so long.

CTScott · 07-05-2012, 12:04 PM

The cover just pushes on from the front of the bumper. The four slots are what the clips snap into.

nielandm · 07-05-2012, 12:06 PM

The clips are damaged then. It fits in, but will not snap. If I attempt to drive with it in, guaranteed it will fall out. How can I repair the clips and where can I buy them, if I can?

1.5 · 07-05-2012, 12:14 PM

toyota sells those covers for like $5-10 a piece if you want to buy one.

nielandm · 07-05-2012, 12:16 PM

yeah, I bought the cover out of my toyota dealership. The installation of the damaged area is a bit trickey. Not sure if I need to remove anything or not. I've never encountered this incident before.

cali yaris · 07-05-2012, 12:17 PM

Or, if you're not planning on replacing that with a foglight kit, silicone or hot glue it.

CTScott · 07-05-2012, 12:45 PM

Quote:

Originally Posted by nielandm

The clips are damaged then. It fits in, but will not snap. If I attempt to drive with it in, guaranteed it will fall out. How can I repair the clips and where can I buy them, if I can?

With the position of the crack I can see that being an issue. Like CaliYaris said, some type of adhesive would be the way to go. I personally would use Automotive Goop (available at any auto parts place or most hardware stores) and just put a dab on each of the 4 clips. Then, if you eventually decide to replace the bumper you can fairly easily get the cover off and reuse it.

nielandm · 07-05-2012, 12:49 PM

Alright I'll give that a try. Thanks guys!

07-05-2012, 11:52 AM	#2
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	What do you mean by cover? Is it the lens? Or is it the entire lamp? If lens, you are going to have to open the lamp and seperate it and just placed the new lens and then seal it back up. If you purchased the entire lamp, you will need to take the front bumper off, or pull back your wheel well liner enough to reach the old lamp with a screw driver. Remove the 2-4 screws that secure the lamp to the back of the bumper, twist the bulb and pull it out and slide it in the new lamp. Twist and lock it then reattach the lamp to the bumper via those same screws and then put the bumper/wheel well back on and that should do it. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

07-05-2012, 12:04 PM	#4
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	The cover just pushes on from the front of the bumper. The four slots are what the clips snap into. __________________

07-05-2012, 12:14 PM	#6
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	toyota sells those covers for like $5-10 a piece if you want to buy one. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

07-05-2012, 12:17 PM	#8
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Or, if you're not planning on replacing that with a foglight kit, silicone or hot glue it. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0	goku87	DIY / Maintenance / Service	127	02-19-2023 07:01 PM
Rear 'Fog Lamp' Function	revolution	Yaris TS Talk	1	01-06-2012 06:45 AM
WTB: Fog Lamp only.	SimTronik	Willing to Buy by private party	3	12-01-2011 09:15 AM
Help with fog light installation	06yarishb	DIY / Maintenance / Service	21	11-10-2011 04:25 AM
Clazzio Seat Cover DIY Install	PETERPOOP	DIY / Maintenance / Service	31	09-10-2010 03:30 PM

07-05-2012, 12:01 PM	#3
nielandm MattyBoy View User's Garage Drives: Blue 2011 Yaris Hatchback Join Date: Jul 2012 Location: New Hampshire Posts: 8	I just uploaded pictures, sorry it took so long.

07-05-2012, 12:06 PM	#5
nielandm MattyBoy View User's Garage Drives: Blue 2011 Yaris Hatchback Join Date: Jul 2012 Location: New Hampshire Posts: 8	The clips are damaged then. It fits in, but will not snap. If I attempt to drive with it in, guaranteed it will fall out. How can I repair the clips and where can I buy them, if I can?

07-05-2012, 12:16 PM	#7
nielandm MattyBoy View User's Garage Drives: Blue 2011 Yaris Hatchback Join Date: Jul 2012 Location: New Hampshire Posts: 8	yeah, I bought the cover out of my toyota dealership. The installation of the damaged area is a bit trickey. Not sure if I need to remove anything or not. I've never encountered this incident before.

07-05-2012, 12:49 PM	#10
nielandm MattyBoy View User's Garage Drives: Blue 2011 Yaris Hatchback Join Date: Jul 2012 Location: New Hampshire Posts: 8	Alright I'll give that a try. Thanks guys!