Hello Yaris lovers! (great brakes inside) - Toyota Yaris Forums

Dezod · 02-09-2007, 11:34 AM

Well, we are a new vendor on here and will be bringing quite a few new products to the market starting with some high performance brake pads.

Better stopping is always a plus in my book, and the Yaris seems to lack a bit IMHO in comparison to some other vehicles. Anyway, as a result we took it upon ourselves to go ahead and create some kick-butt pads for the community.

About them:
* High metal and carbon content for extreme heat and load conditions.
* Low resin content for long life and maximum fade resistance.
* Original equipment style hardware.
* Original equipment style noise dampening shims for quiet performance.
* Slotted and chambered just like OE for smooth, quiet engagement.
* Operates best under severe conditions and possesses a higher heat range than most pads.
* Dual layered friction for maximum sheer strength under severe pressures.

They have an excellent initial bite!

Stop obscenely fast!

http://dezod.com/pd_ffc.cfm

Doc Zaius · 02-09-2007, 12:03 PM

Very, very nice. I'm glad there's an alternative to the C-One brakes.

How much? Colour options?

jamal1984 · 02-09-2007, 01:24 PM

yeah hook me up one, i need one for my yaris real bad, color options and pricess? Group discount?

Doc Zaius · 02-09-2007, 01:32 PM

Also, any plans on making a rear disc brake conversion kit? Thanks!

Dezod · 02-09-2007, 01:47 PM

No plans on making a rear disc conversion at this time.

Colors are on the Henry Ford aspect of the Model T: "You can have any color you want, so long as it's black." Besides, to keep the cost down we saw no need in offer a color to a pad that is not seen on the car.

Pricing is $57.50 for the axle set. We can offer a group buy on them for sure if there is enough demand. Right now we are limited to sets available, as this was a test market initially.

Linkage: http://dezod.com/pd_ffc.cfm

YamilR · 02-09-2007, 06:39 PM

Quote:

Originally Posted by Dezod

No plans on making a rear disc conversion at this time.

Colors are on the Henry Ford aspect of the Model T: "You can have any color you want, so long as it's black." Besides, to keep the cost down we saw no need in offer a color to a pad that is not seen on the car.

Pricing is $57.50 for the axle set. We can offer a group buy on them for sure if there is enough demand. Right now we are limited to sets available, as this was a test market initially.

Linkage: http://dezod.com/pd_ffc.cfm

I think you need a vendors account to push your products on forum...at least thats the right thing to do

Dezod · 02-10-2007, 07:55 AM

Quote:

Originally Posted by YamilR

I think you need a vendors account to push your products on forum...at least thats the right thing to do

We are a vendor on here. Dues are paid.

jamal1984 · 02-09-2007, 02:14 PM

$57.50 for the set is not bad, is that mean both side?

Dezod · 02-09-2007, 03:49 PM

Quote:

Originally Posted by jamal1984

$57.50 for the set is not bad, is that mean both side?

Axle set. All the front pads needed.

ChinoCharles · 02-09-2007, 09:53 PM

Put them on Ebay and pretend you're a member, then PM me with a link to the sale.

Violin · 02-09-2007, 10:04 PM

I take it their cold stopping is lacking?

Dezod · 02-10-2007, 07:56 AM

Quote:

Originally Posted by Violin

I take it their cold stopping is lacking?

Not at all. These actually have a pretty vast heat range, but work exceptionally better under some heat from intense braking.

spkrman · 02-10-2007, 07:58 AM

Quote:

Originally Posted by Dezod

Not at all. These actually have a pretty vast heat range, but work exceptionally better under some heat from intense braking.

this post should prompt a group buy...

spkrman · 02-09-2007, 10:57 PM

+1 for group buy, im definitely in!

the stockers arent too bad, but they do show some fade with spirited driving through my 1 mile or so road that has a few stop signs.

My monte carlo used to hit the same road every now and again.... its what prompted me to get the rotors turned and get ceramic pads, made a WORLD of difference.

If the yaris recieves any significant gain in fade I'd be happy, stopping power, IMO, is just fine.

Nimble · 02-09-2007, 11:22 PM

Quote:

Originally Posted by spkrman

If the yaris recieves any significant gain in fade I'd be happy, stopping power, IMO, is just fine.

I agree. I mean, how much stopping power is really needed to stop a 2300lb car?

*Chris07LB* · 02-10-2007, 07:00 AM

Noticed mine are starting to suck.... Any plans on running a GB?

And colors? Colors??? You guys want color options on a brake pad??

Ohh, thats rich!!!

Dezod · 02-10-2007, 08:02 AM

Quote:

Originally Posted by Chris07LB

Noticed mine are starting to suck.... Any plans on running a GB?

And colors? Colors??? You guys want color options on a brake pad??

Ohh, thats rich!!!

We can host a GB! Let's start now. Here is the brake down.

1-5 buyers: $54.50
5-10 buyers: $51.00
10+ buyers: $49.25

Remember, these prices are low an are working off of percentages, which may not seem like much, but respectively it is 5% off, 11% off and 15% off.

Shipping will be flat rate of $10 in the 48 states. AK, HI, Canada and anywhere else will need to PM me for shipping quotes. They will receive list rate at that point.

1
2
3
4
5
6
7
8
9
10

spkrman · 02-10-2007, 07:57 AM

Quote:

Originally Posted by Nimble

I agree. I mean, how much stopping power is really needed to stop a 2300lb car?

Put a stick out the window and drag it along for normal stopping.... pop the door open and drag your gym shoe for high speed stopping... and wear boots for track day.

02-09-2007, 11:34 AM	#1
Dezod The Scion Guru Drives: Scions Join Date: Feb 2007 Location: Western NY Posts: 131	Hello Yaris lovers! (great brakes inside) Well, we are a new vendor on here and will be bringing quite a few new products to the market starting with some high performance brake pads. Better stopping is always a plus in my book, and the Yaris seems to lack a bit IMHO in comparison to some other vehicles. Anyway, as a result we took it upon ourselves to go ahead and create some kick-butt pads for the community. About them: * High metal and carbon content for extreme heat and load conditions. * Low resin content for long life and maximum fade resistance. * Original equipment style hardware. * Original equipment style noise dampening shims for quiet performance. * Slotted and chambered just like OE for smooth, quiet engagement. * Operates best under severe conditions and possesses a higher heat range than most pads. * Dual layered friction for maximum sheer strength under severe pressures. They have an excellent initial bite! Stop obscenely fast! http://dezod.com/pd_ffc.cfm Last edited by Dezod; 02-09-2007 at 04:58 PM.

02-09-2007, 12:03 PM	#2
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Very, very nice. I'm glad there's an alternative to the C-One brakes. How much? Colour options? __________________ 2006 Red Blitzed RS 5-door

02-09-2007, 01:32 PM	#4
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Also, any plans on making a rear disc brake conversion kit? Thanks! __________________ 2006 Red Blitzed RS 5-door

02-09-2007, 01:47 PM	#5
Dezod The Scion Guru Drives: Scions Join Date: Feb 2007 Location: Western NY Posts: 131	No plans on making a rear disc conversion at this time. Colors are on the Henry Ford aspect of the Model T: "You can have any color you want, so long as it's black." Besides, to keep the cost down we saw no need in offer a color to a pad that is not seen on the car. Pricing is $57.50 for the axle set. We can offer a group buy on them for sure if there is enough demand. Right now we are limited to sets available, as this was a test market initially. Linkage: http://dezod.com/pd_ffc.cfm __________________ Dezod Motorsports Inc-'We ARE performance." P: 716-681-6666 E: sales@dezod.com W: www.dezod.com Your leading source for all of your performance needs! From turbos and components, to brakes and suspension, Dezod has you covered.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
I test drove a Yaris, Versa and FIT	CanadaCraig	New YARIS Purchase Forum	41	11-29-2008 09:18 PM
Toyota Yaris to Sponsor FOX's "Prison Break"	YarisBueller	General Yaris / Vitz Discussion	0	04-30-2006 08:01 PM

02-09-2007, 01:24 PM	#3
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	yeah hook me up one, i need one for my yaris real bad, color options and pricess? Group discount?

02-09-2007, 02:14 PM	#8
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	$57.50 for the set is not bad, is that mean both side?

02-09-2007, 09:53 PM	#10
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Put them on Ebay and pretend you're a member, then PM me with a link to the sale.

02-09-2007, 10:04 PM	#11
Violin View User's Garage Drives: 2007 Yaris LB Auto Join Date: Jul 2006 Location: New Jersey Posts: 1,592	I take it their cold stopping is lacking?

02-09-2007, 10:57 PM	#14
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	+1 for group buy, im definitely in! the stockers arent too bad, but they do show some fade with spirited driving through my 1 mile or so road that has a few stop signs. My monte carlo used to hit the same road every now and again.... its what prompted me to get the rotors turned and get ceramic pads, made a WORLD of difference. If the yaris recieves any significant gain in fade I'd be happy, stopping power, IMO, is just fine.

02-10-2007, 07:00 AM	#16
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Noticed mine are starting to suck.... Any plans on running a GB? And colors? Colors??? You guys want color options on a brake pad?? Ohh, thats rich!!!