My DynaPack Dyno Results. - Page 3 - Toyota Yaris Forums

PETERPOOP · 03-01-2009, 03:18 PM

Quote:

Originally Posted by ddongbap

And anyways, who cares if there is a 10% flux?

Because I think you'd want to know what you're actually putting down?

I will probably dyno my car on both the dynapack and the dynojet once I am done modding my car. Then we can compare numbers. And if the dynojet says I have more whp than the dynapack (which it will), i am going to tell everyone the hp numbers from the dynojet and not the dynapack! hah.

gwasabi · 03-01-2009, 05:11 PM

.....I don't think they have a Dynojet in Hawaii......I thought Sonics was using Dynapack too.....I'm not too sure on that though don't quote me lol

YarisPR · 03-01-2009, 05:30 PM

I haven't take my car to the dyno cause I'am afraid this might happend... mods and not even 100whp.... I may throw the car over a cliff

But soon I'll have to face my fears... I have smoked a 102whp Xb but still that doesn't mean I have 100whp.....

I'll let you guys know

PETERPOOP · 03-01-2009, 05:39 PM

Quote:

Originally Posted by gwasabi

.....I don't think they have a Dynojet in Hawaii......I thought Sonics was using Dynapack too.....I'm not too sure on that though don't quote me lol

We do. Rev Tek Motor Sports in Waipahu. They wanted 115$ for three pulls. bleh

gwasabi · 03-01-2009, 05:40 PM

I TOLD YOU MUNKYWURKS!!!! = AWESOME!!!!

fuji · 03-02-2009, 01:46 AM

LT. Noogie, still up for paying for half a dynorun???

PETERPOOP · 03-02-2009, 01:47 AM

Yah noogie, 95$ for a dynapack, or 115$ i believe for a dynojet here in hawaii. You pay half. You choose which dyno for fuji to do it on. haha

LtNoogie · 03-02-2009, 02:20 AM

Quote:

Originally Posted by fuji

LT. Noogie, still up for paying for half a dynorun???

PM sent.

fuji · 03-04-2009, 03:40 AM

I will call Munkey Werks this week and try to see if I can get it done this Saturday. My car is the same white hatch but with no engine mods. We can get a good baseline reading.

PETERPOOP · 03-04-2009, 11:44 AM

Call them up. Sean is the main guy who runs the shop. There are only like 2 guys that work there. Tell him you are friends with peterpoop and thomas (gwasabi). You usually don't need an appointment if you go there on saturday. I showed up at 11am when they opened, but they came a little later (11:30ish). His wife is pregnant. Anyways, it takes him like half an hour to set the machine up. So the entire process is like an hour and half. Only costs 95$ out the door. Nice guy.

LtNoogie · 03-04-2009, 11:52 AM

fuji, I prefer that you use a dynojet facility if possible. Their printouts match mine and others who have used dynojets. Also, they print the a/f mixture.

http://www.yarisworld.com/forums/showthread.php?t=10320

PETERPOOP · 03-04-2009, 12:14 PM

In that case, fuji, call up Rad Motor Sports in waipahu. They charged, I believe 115$ for 3 pulls on a dynojet.

The Spectacle · 03-09-2009, 01:53 AM

You guys that mod this car looking for power really confuse me.

PETERPOOP · 03-09-2009, 01:57 AM

Keep trying, it's not that hard to figure out.

The Spectacle · 03-09-2009, 10:09 AM

Quote:

Originally Posted by PETERPOOP

Keep trying, it's not that hard to figure out.

Quote:

Originally Posted by PETERPOOP

I didn't even break it into the 90whp mark. My best pull was 89.9 whp. I wanted to shoot myself.

How much money have you spent in mods? How much MORE money are you about to spend??? I can understand modding for fun or just to say you did it...but looking for horsepower performance from a Yaris is like looking for gas mileage from a Viper...it doesn't make sense.

But you keep on keeping on buddy.

ChinoCharles · 03-09-2009, 10:33 AM

Um, we have a few members @ 140-150 WHP, a couple @ 180ish WHP, and one about to go over 280 WHP. What is your point? People drop Hyabusa motors in Smart cars and build go karts with inline fours.

If you want to save your money that is your perrogative. No reason to crap on his. Just sayin'.

The Spectacle · 03-09-2009, 11:00 AM

The point is, don't get upset when your econobox gas sipper doesn't make 100whp just because you threw some bolt ons at it. That's all.

ChinoCharles · 03-09-2009, 11:01 AM

03-01-2009, 05:30 PM	#39
YarisPR Drives: Yaris Sedan Join Date: Sep 2006 Location: MayaWest, Puerto Rico Posts: 1,574	I haven't take my car to the dyno cause I'am afraid this might happend... mods and not even 100whp.... I may throw the car over a cliff But soon I'll have to face my fears... I have smoked a 102whp Xb but still that doesn't mean I have 100whp..... I'll let you guys know __________________ I Drive a 129whp Yaris ;)

03-04-2009, 11:52 AM	#47
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	fuji, I prefer that you use a dynojet facility if possible. Their printouts match mine and others who have used dynojets. Also, they print the a/f mixture. http://www.yarisworld.com/forums/showthread.php?t=10320 __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TS/Xd Long Tube Header & Intake dyno results	richardholdener	Yaris TS Talk	21	01-06-2009 05:28 AM
NST Pulley Dyno Results	richardholdener	Performance Modifications	51	12-18-2008 09:11 PM
Long Tube Header Dyno results & Photo	richardholdener	Performance Modifications	59	11-26-2008 05:27 PM
dyno results are in!!!!	turboyaris	Performance Modifications	105	04-01-2007 06:03 PM
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS !	WRLEO	Sponsors Classifieds Area	0	02-22-2007 10:14 AM

03-01-2009, 05:11 PM	#38
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	.....I don't think they have a Dynojet in Hawaii......I thought Sonics was using Dynapack too.....I'm not too sure on that though don't quote me lol

03-01-2009, 05:40 PM	#41
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	I TOLD YOU MUNKYWURKS!!!! = AWESOME!!!!

03-02-2009, 01:46 AM	#42
fuji Drives: Polar White Yaris HB Join Date: Dec 2008 Location: Honolulu Posts: 263	LT. Noogie, still up for paying for half a dynorun???

03-02-2009, 01:47 AM	#43
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	Yah noogie, 95$ for a dynapack, or 115$ i believe for a dynojet here in hawaii. You pay half. You choose which dyno for fuji to do it on. haha

03-04-2009, 03:40 AM	#45
fuji Drives: Polar White Yaris HB Join Date: Dec 2008 Location: Honolulu Posts: 263	I will call Munkey Werks this week and try to see if I can get it done this Saturday. My car is the same white hatch but with no engine mods. We can get a good baseline reading.

03-04-2009, 11:44 AM	#46
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	Call them up. Sean is the main guy who runs the shop. There are only like 2 guys that work there. Tell him you are friends with peterpoop and thomas (gwasabi). You usually don't need an appointment if you go there on saturday. I showed up at 11am when they opened, but they came a little later (11:30ish). His wife is pregnant. Anyways, it takes him like half an hour to set the machine up. So the entire process is like an hour and half. Only costs 95$ out the door. Nice guy.

03-04-2009, 12:14 PM	#48
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	In that case, fuji, call up Rad Motor Sports in waipahu. They charged, I believe 115$ for 3 pulls on a dynojet.

03-09-2009, 01:53 AM	#49
The Spectacle View User's Garage Drives: 08 BSP LB Join Date: Oct 2008 Location: Tampa, FL Posts: 218	You guys that mod this car looking for power really confuse me.

03-09-2009, 01:57 AM	#50
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	Keep trying, it's not that hard to figure out.

03-09-2009, 10:33 AM	#52
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Um, we have a few members @ 140-150 WHP, a couple @ 180ish WHP, and one about to go over 280 WHP. What is your point? People drop Hyabusa motors in Smart cars and build go karts with inline fours. If you want to save your money that is your perrogative. No reason to crap on his. Just sayin'.

03-09-2009, 11:00 AM	#53
The Spectacle View User's Garage Drives: 08 BSP LB Join Date: Oct 2008 Location: Tampa, FL Posts: 218	The point is, don't get upset when your econobox gas sipper doesn't make 100whp just because you threw some bolt ons at it. That's all.

03-09-2009, 11:01 AM	#54
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787