DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation

[masterpipo1]

Hi !

i did every step for the cruise control stalk, i didnt do any wiring yet cause i dont know if i need to do it.

In the tutorial, they said that i need to look at the D3 Connector here what my panel look like



I think that my D3 connector is no 1. if not , can you guys tell me which connector i need to look at. On this connector , i see the pink and blue wire,i dont see any black wire.

i dont know what is the steering column wire but on the D3 connect, it look like the previous owner of the car cut a remove a wire ( i circled it in red), and i dont know if the white wire sold where the no.2 is , was connected on the D3 Connector.


I dont know what is no.3 black box either. here's what written on the top of that black box.

[IMG][/IMG]

I alos took a picture of where the black box wires are going, but i can't see where they end up.

[IMG][/IMG]

I tried the cruise control switch on the road but i didnt work. The horn's working so i dont think its the cruise control stalk connector.

Can you guys help me out on this please.

thanks you !

[masterpipo1]

Hi there,

i'm doing a DIY Cruise Control install, im at the step to run to ECM A21 conector pin 40 to the D3 Connector. My problem is dont really know wheres my D3 is located. Here's a picture of my panel .



I think it's the number one 1., but it dont look like the same as in the tutorial.

There's a wire at no.2 , i dont know what this for, i a saw a black box no.3 also. I dont know if it's the previous owner who wiring this.

Can you help me out , thanks you. !

[masterpipo1]

Hi there,

im doing an DIY Cruise Control installation on my Yaris 2007 Sedan (w/o power) automatic.

Im in the step that a i've to wire ECM A21 Connector 41 pin to the D3 Connector. The problem is i can't find my D3 connector.

Here's a photo of my control panel :



and a closer one :


i think it the no.1 but i'm not quite sure, cause in the tutorial, it's says that i've to look at a black wire, but i dont see any black wire alone.

I've install the cruise control stalk, i went on the road to try the cruise control but it didnt work. My horn's working so i guess the steering wheel connector is okay.

On number 2. in the picture, there's a white coming out from a bunch of wire directly connected (solder) to a yellow wire, i dont know if this is why it doesn't work. And on the no1 connected, i've circle a spot , there's a pin there but i dont know if it's that white wire that has been caught by the previous owner...

and that yellow wire is connected to a black box (no.3 on the picture) , and i dont know what this black box for. Here's what you can see on the top of that black box.




and here's where those wires goes. I dont know where they end up.




Can you help me out on this ?

Thanks a lot !

[masterpipo1]

Hi there,

im doing an DIY Cruise Control installation on my Yaris 2007 Sedan (w/o power) automatic.

Im in the step that a i've to wire ECM A21 Connector 41 pin to the D3 Connector. The problem is i can't find my D3 connector.

Here's a photo of my control panel :



and a closer one :


i think it the no.1 but i'm not quite sure, cause in the tutorial, it's says that i've to look at a black wire, but i dont see any black wire alone.

I've install the cruise control stalk, i went on the road to try the cruise control but it didnt work. My horn's working so i guess the steering wheel connector is okay.

On number 2. in the picture, there's a white coming out from a bunch of wire directly connected (solder) to a yellow wire, i dont know if this is why it doesn't work. And on the no1 connected, i've circle a spot , there's a pin there but i dont know if it's that white wire that has been caught by the previous owner...

and that yellow wire is connected to a black box (no.3 on the picture) , and i dont know what this black box for. Here's what you can see on the top of that black box.




and here's where those wires goes. I dont know where they end up.




Can you help me out on this ?

Thanks a lot !

[ttpmurphy]

Bought the parts from CTScott for a 2011 toyota yaris sedan, power package, automatic. Parts arrived very fast. Worked great! To clarify the guide, the only thing you need for my same car configuration is the control stalk, wire harness (connects cruise control and horn to rest of car), and 2 screws. No need for the D3 stuff like the guide says.

Pics: https://www.dropbox.com/sc/4jufdp0gb...I0EfMPWuFQ-vta

[CTScott]

Originally Posted by ttpmurphy

Bought the parts from CTScott for a 2011 toyota yaris sedan, power package, automatic. Parts arrived very fast. Worked great! To clarify the guide, the only thing you need for my same car configuration is the control stalk, wire harness (connects cruise control and horn to rest of car), and 2 screws. No need for the D3 stuff like the guide says.

Pics: https://www.dropbox.com/sc/4jufdp0gb...I0EfMPWuFQ-vta

Correct - For a 2011 Sedan with power you do not need to make the D3 connections as they will already be complete.

[CTScott]

masterpipo1 - Those are the same pictures (and for some reason you posted them three times) as what you PMed me. As I told you in the PM you are looking in the wrong place for connector D3. Again, as I stated in the PM - Look at my cruise control DIY for simple instructions on how to remove the lower steering column cover to access D3: http://www.yarisworld.com/forums/showthread.php?t=33750


Also, I don't know what that floating relay is for in your pictures, but the twisted bare wire is not a safe thing to have under your dash.

[428CobraJet]

Scott...i sent you a pm

[metalshark]

Hi Scott. I installed the Rostra cruise on my 2008 Yaris. I have a 2012 automatic Yaris now. I have a stalk for it. Has anyone done a 2012 yet.

[CTScott]

Originally Posted by metalshark

Hi Scott. I installed the Rostra cruise on my 2008 Yaris. I have a 2012 automatic Yaris now. I have a stalk for it. Has anyone done a 2012 yet.

Yes. Same OEM stalk is used for 2012 as for 2008. Other than the different release of the airbag, there is no difference for 2012 from 09-11. I have the parts required if you are interested.

[Mikeyh]

Scott,

Thanks for the cruise control kit for my 2014 Yaris L. Just as you said, it was easy to install, really plug and play. Took about 20 mins. and the wiring you included for stalk and horn wire made connections simple.

If I can do it anyone can!

Anita (Mikey's wifey)

[laobo]

Originally Posted by Mikeyh

Scott,

Thanks for the cruise control kit for my 2014 Yaris L. Just as you said, it was easy to install, really plug and play. Took about 20 mins. and the wiring you included for stalk and horn wire made connections simple.

If I can do it anyone can!

Anita (Mikey's wifey)

Dear Friend.
can you show me, pin of teminal ECM to connect from Swith CCS?
Im a yaris sedan 2014, but i not found pin ECM ( ECU) from my car. OR have you got this Diagram
Thanks!

[thomascuba]

Dear CTScott;

I would like to install the CC on my wife's 2007 Yaris Base A/T (Hatchback).

Do you still have OEM parts available?

What parts do I need and how much will it cost me? I will prefer not to drill holes on the wheel cover.

Thanks!

[CTScott]

Originally Posted by thomascuba

Dear CTScott;

I would like to install the CC on my wife's 2007 Yaris Base A/T (Hatchback).

Do you still have OEM parts available?

What parts do I need and how much will it cost me? I will prefer not to drill holes on the wheel cover.

Thanks!

Yes. PM sent.

[thomascuba]

Dear CTScott;

I have sent you a PM. I will go ahead and install the CC. But I need to purchase some wires from you.

Thanks Thomascuba.

[thomascuba]

Hi CTScott;

Here are the pictures of the Stalk I got.

Thanks, Thomascuba

[soldout]

The cruise control light comes on my dash but I cant get it to activate. 2010 LB 5spd MT power package so I alreadt had the clutch switch wiring.

[CTScott]

Originally Posted by soldout

The cruise control light comes on my dash but I cant get it to activate. 2010 LB 5spd MT power package so I alreadt had the clutch switch wiring.

Did you actually install the clutch switch and is it properly adjusted, where it is fully pressed when the clutch pedal is not touched?