Autopower roll bars

[cali yaris]

I'm now a dealer for AutoPower, which make very nice bolt-in and weld-in cages for racing. They recently fabricated the cages for the 2011 Toyota Yaris race cars, and are now offering bolt-in versions.

I'll be stocking the first two shown below, others are custom orders and take about 30 days to produce.

bolt in ROLL BAR (approx. $400)

This roll bar will give your street car a performance look and style.
In most cars rear seats and/or convertible top remain in place and useable.
4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
All necessary installation and mounting hardware with back-up plates is included.



STREET SPORT bolt-in ROLL BAR w/ HARNESS BAR (approx. $500)

Our Street-Sport bar is just what you need for your high performance street car.
Designed for high performance street use.
Bolt-in harness mount tube for easy installation of safety harnesses.
Bolt-In Removable horizontal harness.
4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
All necessary installation and mounting hardware with back-up plates is included.
The Street-Sport Roll Bar has a bolt in harness mount tube for easy installation of harnesses and access to the back seat for street use.



RACE bolt in ROLL BAR (approx. $620)

The Race roll bar is designed for solo, autocross and high speed time trials. Race roll bars have a diagonal cross brace and most have a harness mount tube.
Autopower will select tube size and type for your needs.
Race roll bars are made with 1.750 x .120 DOM steel.
4 point mounting with welded diagonal crossbrace.
All necessary installation and mounting hardware with back-up plates is included.

*** Optional: Harness bar and cross brace are bolt-in instead of welded in place.



ROLL CAGE (approx. $800-1200)

These are done to order, and can include rear triangulation, door bars, and front cage additions. This would be a weld-in option only! The one shown below has the front section but not the rear triangulation.