Micro Image Intake Manifold thread

[cali yaris]

You'll see that we re-used the stock rubber intake hose, a short MAF tube and an air filter for our 'short ram' intake. It's a little mickey mouse, but it works and we used the parts we had on hand.

Some vac hoses had to be lengthened, this could be fixed by changing the location of the fitting on the mani, or we can include a replacement hose kit. Too soon to work on that.

The runners are just about as long as they can be without touching anything. Had to work the mani down in there carefully.

**The mani is made for a 1ZZ throttle body; note that we installed the stock throttle body, we'll see how that works out. I figure not everyone wants to pop for a different throttle body if they don't have to. So more testing there is probable.

AWAITING THE VICTIM'S CAR



STOCK



APART



IN PLACE



INSTALLED