Installed Rain Sensing Wipers Sensor

[toy_toronto]

Originally Posted by CTScott

You will follow the instructions for: -VEHICLE RELAY, GROUND SIDE CONTROL


The Yaris doesn't have a headlight on and then separate beam control switch, so you will use one relay to switch the light blue wire in pin 8 of the headlight stalk connector (low beams) to ground and the other relay to switch the white wire in pin 13 (tail lights) to ground.

Thanks CTScott, so basically I'll need to get 2 relays:

- Use 1st relay to switch the Pin 8 (HL) to ground.
- Use 2nd relay to switch Pin 13 (B1) to ground.


Pins to GND:



-toy