My new Magnaflow muffler; yet not installed. - Toyota Yaris Forums

PETERPOOP · 03-14-2009, 01:52 AM

Here's my new Magnaflow muffler that I will be using for my new exhaust setup. It has a 2.25" in and two 3" out dual tips. It's from their street performance line. I wanted a different look. I hope it sounds good, it should.

Going to install my Megan header tomorrow and next weekend drive around and get quotes for a header back exhaust (no cats) with mandrel bends.

Gideon · 03-14-2009, 01:56 AM

Almost makes me wish I waited for the muffler when I was doing my exhaust! They had to order it and it would have taken two days, which was two days too long! lol

Can't wait to see it/hear it on the car.

Kaotic Lazagna · 03-14-2009, 02:01 AM

Sweet. Will most likely sound like mine: http://www.youtube.com/watch?v=xfOsST0HFNc

Going for a Euro look?

PETERPOOP · 03-14-2009, 02:02 AM

Do you have 2.25" exit tips or 3"? The top of the tips look the be touching the bottom of your bumper. Has it burned the paint or anything? I might have mine a little lower than yours, but since my tips are angled, I think i'll be ok.

Kaotic Lazagna · 03-14-2009, 02:08 AM

I believe this is the one that I have: http://www.magnaflow.com/02product/s...e=main&id=7970. 2.25" in and out. My tips, I think they are either 2.5 or 3 inches. hahaha. They're not touching the lip, there's a few mm of room. hahaha. But nope, no burnt paint, and not even any carbon buildup. No warping, no worries.

*knocks on wood*

Gideon · 03-14-2009, 02:15 AM

Quote:

Originally Posted by Kaotic Lazagna

Sweet. Will most likely sound like mine: http://www.youtube.com/watch?v=xfOsST0HFNc

Maybe it's the video but it doesn't sound that deep.

Kaotic Lazagna · 03-14-2009, 02:18 AM

Quote:

Originally Posted by Gideon

Maybe it's the video but it doesn't sound that deep.

Combination of both the video and the fact that it hasn't been broken in yet. hehe, I added that little bubble thing because I thought the same thing. A lot of people are surprised that the sound comes from such a small car. Someone even asked if I had an LS1 under the engine. hahahaha, yeah, I know he was exaggerating, but he just didn't imagine my car pulling up when he heard the muffler first.

Kaotic Lazagna · 03-14-2009, 02:19 AM

If I have time tomorrow, I'll borrow my bro's camera again and shoot an outside and/or an inside video. Don't expect crazy runs, as my mom lives in a densely populated area, so it would be normal driving.

Gideon · 03-14-2009, 02:22 AM

Quote:

Originally Posted by Kaotic Lazagna

Combination of both the video and the fact that it hasn't been broken in yet. hehe, I added that little bubble thing because I thought the same thing. A lot of people are surprised that the sound comes from such a small car. Someone even asked if I had an LS1 under the engine. hahahaha, yeah, I know he was exaggerating, but he just didn't imagine my car pulling up when he heard the muffler first.

lol yeah, my coworker was walking down the street when I drove by and he said he thought it was an entirely different (more powerful) car by the sound until he saw me.

Kaotic Lazagna · 03-14-2009, 02:36 AM

Quote:

Originally Posted by Gideon

lol yeah, my coworker was walking down the street when I drove by and he said he thought it was an entirely different (more powerful) car by the sound until he saw me.

LOL.

Sorry for the threadjack Peter.

PETERPOOP · 03-14-2009, 02:41 AM

I hate all of you guys! ;) Naw, we're the Magnaflow crew.

1NZYaris1 · 03-14-2009, 04:49 AM

Havn't you installed it yet , shit the S/C was installed in half this time

eTiMaGo · 03-14-2009, 06:41 AM

yeah man come on, and no videos yet?

you didn't mention, you'll be center-mounting it, right? should look pretty damn good with the angled tips!

*kimona* · 03-14-2009, 08:20 AM

Yup, that will make one fine looking centre mount!

thebarber · 03-14-2009, 11:51 AM

thats one ugly muffler...

PETERPOOP · 03-14-2009, 12:47 PM

I'm not sure if I'll be center mounting it or just having it on the right of the license plate. Hmmm, decisions decisions.

Kaotic Lazagna · 03-14-2009, 07:13 PM

For the Euro tip/look, I like it off center to one of the sides. If the tips were straight, then center FTW!

I'm uploading a video of how mine sounds. I just took it earlier today. I'll post it up in a bit. I'm going to go and cut my hair. Back in a few.

Kaotic Lazagna · 03-14-2009, 07:14 PM

Bah! My bro went into the bathroom already!!!!!!!!!!!

03-14-2009, 01:52 AM	#1
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	My new Magnaflow muffler; yet not installed. Here's my new Magnaflow muffler that I will be using for my new exhaust setup. It has a 2.25" in and two 3" out dual tips. It's from their street performance line. I wanted a different look. I hope it sounds good, it should. Going to install my Megan header tomorrow and next weekend drive around and get quotes for a header back exhaust (no cats) with mandrel bends.

03-14-2009, 04:49 AM	#12
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	Havn't you installed it yet , shit the S/C was installed in half this time __________________ http://www.microimageonline.com/forums/index.php

03-14-2009, 06:41 AM	#13
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	yeah man come on, and no videos yet? you didn't mention, you'll be center-mounting it, right? should look pretty damn good with the angled tips! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

03-14-2009, 11:51 AM	#15
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	thats one ugly muffler... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who has installed Megan Coilovers?	Thirty-Nine	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	103	03-01-2010 06:50 AM
Installed the Tanabe Strut bar but had to remove my ground wire kit..	vacantj	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	6	10-01-2007 01:56 PM
Which options are dealer installed?	grampi	New YARIS Purchase Forum	4	07-30-2007 01:23 AM
Magnaflow muffler installed - vid clip	spkrman	Performance Modifications	3	11-17-2006 08:45 PM
Tanabe NF210's installed...got a question though	Terrorize	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	32	09-29-2006 07:45 AM

03-14-2009, 01:56 AM	#2
Gideon ★weeaboo★ View User's Garage Drives: 2008 Bayou LB Join Date: Oct 2008 Location: Sunnyvale, CA Posts: 661	Almost makes me wish I waited for the muffler when I was doing my exhaust! They had to order it and it would have taken two days, which was two days too long! lol Can't wait to see it/hear it on the car.

03-14-2009, 02:01 AM	#3
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Sweet. Will most likely sound like mine: http://www.youtube.com/watch?v=xfOsST0HFNc Going for a Euro look?

03-14-2009, 02:02 AM	#4
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	Do you have 2.25" exit tips or 3"? The top of the tips look the be touching the bottom of your bumper. Has it burned the paint or anything? I might have mine a little lower than yours, but since my tips are angled, I think i'll be ok.

03-14-2009, 02:08 AM	#5
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	I believe this is the one that I have: http://www.magnaflow.com/02product/s...e=main&id=7970. 2.25" in and out. My tips, I think they are either 2.5 or 3 inches. hahaha. They're not touching the lip, there's a few mm of room. hahaha. But nope, no burnt paint, and not even any carbon buildup. No warping, no worries. knocks on wood

03-14-2009, 02:19 AM	#8
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	If I have time tomorrow, I'll borrow my bro's camera again and shoot an outside and/or an inside video. Don't expect crazy runs, as my mom lives in a densely populated area, so it would be normal driving.

03-14-2009, 02:41 AM	#11
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	I hate all of you guys! ;) Naw, we're the Magnaflow crew.

03-14-2009, 08:20 AM	#14
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	Yup, that will make one fine looking centre mount!

03-14-2009, 12:47 PM	#16
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	I'm not sure if I'll be center mounting it or just having it on the right of the license plate. Hmmm, decisions decisions.

03-14-2009, 07:13 PM	#17
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	For the Euro tip/look, I like it off center to one of the sides. If the tips were straight, then center FTW! I'm uploading a video of how mine sounds. I just took it earlier today. I'll post it up in a bit. I'm going to go and cut my hair. Back in a few.

03-14-2009, 07:14 PM	#18
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Bah! My bro went into the bathroom already!!!!!!!!!!!