BC coils on!

[exileddeus]

Finally got some pics of my car with the coils on! Sorry for the poor quality though, they were taken with a phone. Specs are 15x8 +20, 195/40-15, 6k front 4k rear. Although I think I am going to have to go to a 7/5. Rear fenders have been shaved down on the insides and I am seriously thinking about pulling them. [IMG][/IMG]

[IMG][/IMG]

I like the way it looks but it is pretty low, lol. The front rub the fender liner but not the actual fender, the rears will rub fender even with the shave and -2° camber. Hence thinking about the stiffer springs. As for the pulling, I might try to ( carefully ) phonebook pull.

[CTScott]

Looks good. That's the first sports grill that I have seen on an 09-11. That's a great look as well.

[exileddeus]

Thank you, the trd badge is "floating" inside the M.I. grill. I am really suprised more people don't run them, they really improve the front end

[G-Ammo]

Sweet man!

We almost have the same exact style!!!

Check it out :D





Some people told me those XXR rims you got wouldnt fit my Yaris... but they're AWESOME!

I also have BC's!

[1.5]

OP nice! I love seeing more Yari with the fitted look. I definitely say yes to pulling fenders

@G-Ammo you can definitely fit much wider setups on our cars lol

[G-Ammo]

Yes Indeed...! 8J fits perfectly too :D

[1.5]

8j is 8" thats already the size he is running but im saying way wider lol like 10J lol

[G-Ammo]

Damn man u crazy... xD then you probably need some fender flares!

[1.5]

youve seen my thread lol im running 9j up front 10j rear, no flares lol, just camber and rolling/pulling

[fnkngrv]

damn it I want coilovers!

[Thirty-Nine]

Have to say, that looks pretty nice!

[exileddeus]

Thanks everyone,

G-ammo, seeing pics of your machine dropped was a big inspiration :D

And yeah, we could run 9 in the rear, keep it at +20 or +15. Might be rough on the front end though. Hot swaps (wider rear) look good but you limit rotating, and god forbid your tires are directional lol.

[G-Ammo]

haha awesome to hear man!! :D

Yeah I wanted to do 8 rear with +0 haha... but that requires some fender pulling.

I now have 20mm spacer in the back on 7 +20, so basically a 15x7 +0! Which almost has the same fitment as you do with your 8's!

[exileddeus]

Almost, 15x8 +20, with the 13m hubspacers, so I'm sitting on an effective +7. An 8 rear with a zero and some camber and fender pulling would be dead on. Hopefully I'll have time to start the pull on mine tomorrow. Do you rub on your rear fenders? I was gouging my rear tires until I shaved out the inners, still rubbing though:/

[Flipper_1938]

Originally Posted by exileddeus

Almost, 15x8 +20, with the 13m hubspacers, so I'm sitting on an effective +7. An 8 rear with a zero and some camber and fender pulling would be dead on. Hopefully I'll have time to start the pull on mine tomorrow. Do you rub on your rear fenders? I was gouging my rear tires until I shaved out the inners, still rubbing though:/

Please post a pic of "shaved out inners".

[exileddeus]

I'll try get to get one tomorrow if I remember. All I did was take an electric grinder with a flappy wheel to the metal and took out the rolled section of steel right at the finder lip. The yaris' don't have a lot there to begin with but any time the suspension compressed it would make contact with the tire and gouge it. So I eliminated it, helped with the gouging, not with compression rubbing.

[rye7jen]

I am eager to see how you trimmed the inner fender as well. Looking good man!

[G-Ammo]

Yeah I rub my rear fenders too when I'm driving in a little ditch... But I still have 1 cm left of space between the tyres and the rear fenders; I don't rub that much!