NST (NonStopTuning) Pulleys. Info, Specs, User Data... - Page 29 - Toyota Yaris Forums

*Astroman* · 10-12-2009, 03:27 PM

50k+ miles later, still doing this:

NonStopTuning · 10-12-2009, 03:28 PM

Quote:

Originally Posted by Astroman

50k+ miles later, still doing this:

ozmdd · 10-12-2009, 03:29 PM

Quote:

Originally Posted by NonStopTuning

Any new user reviews, thoughts, or comments would be much appreciated!

2008 Yaris LB 5-speed

I am running the NST 10% Underdrive CR-lite pulley. My only other HP-related mods are a Thunder axle-back and a TRD CAI w/WeaponR Secret Weapon dry filter. I just made 107 WHP and 106 TQ on a Mustang Dyno this saturday, in mid-70's (degrees F) weather.

I also am very pleased with the SSK.

(dyno charts posted in proper section)

NonStopTuning · 10-12-2009, 05:05 PM

Quote:

Originally Posted by ozmdd

2008 Yaris LB 5-speed

I am running the NST 10% Underdrive CR-lite pulley. My only other HP-related mods are a Thunder axle-back and a TRD CAI w/WeaponR Secret Weapon dry filter. I just made 107 WHP and 106 TQ on a Mustang Dyno this saturday, in mid-70's (degrees F) weather.

I also am very pleased with the SSK.

(dyno charts posted in proper section)

Awesome!

Thank you for the review

bwong2 · 10-12-2009, 10:47 PM

hi. i'm about to install an underdrive pulley tomorrow morning and was reading over the diy from the other site. there mentions a tic tac sized dowel that makes me slightly nervous. was wondering if i could get one ahead of time just in case i lose this from napa or the dealer and what it might be called there. thanks in advance!

Brian.

ozmdd · 10-12-2009, 10:53 PM

It's not hard to keep track of, but you REALLY don't want to lose it.

NonStopTuning · 10-13-2009, 12:59 AM

Quote:

Originally Posted by bwong2

hi. i'm about to install an underdrive pulley tomorrow morning and was reading over the diy from the other site. there mentions a tic tac sized dowel that makes me slightly nervous. was wondering if i could get one ahead of time just in case i lose this from napa or the dealer and what it might be called there. thanks in advance!

Brian.

It's very easy to keep track of and is called the KEY

redglare45 · 10-14-2009, 01:23 PM

I just got the CR-Lite Pulley Set installed. Great product. Butt dyno says there's some gains in HP. Also, seems to me that it revs quicker. Oh btw, they were the BLUE pulley's I bought from a board member.

NonStopTuning · 10-15-2009, 01:49 PM

Quote:

Originally Posted by redglare45

I just got the CR-Lite Pulley Set installed. Great product. Butt dyno says there's some gains in HP. Also, seems to me that it revs quicker. Oh btw, they were the BLUE pulley's I bought from a board member.

Wow! Blue ones were made for a very short time, they're pretty rare.
Thanks again for the review and the kind words, good luck with all your projects!

andries · 10-16-2009, 11:06 AM

I have the 10% underdrive crankpulley on my 1.8 TS and it's a very,very great mod. Feels like a lot more horsepower.

NonStopTuning · 10-23-2009, 03:05 PM

Quote:

Originally Posted by andries

I have the 10% underdrive crankpulley on my 1.8 TS and it's a very,very great mod. Feels like a lot more horsepower.

Thank you sir

evo165 · 11-11-2009, 08:08 AM

Hi guys, i just installed the underdrive pully on my auto yaris!

On first test drive right after installing, i felt the engine idling is smoother. As i slowly accelerate to move off, i can feel the engine is having less "load" than before!

Now when i tried to apply more harder throttle, immediately the engine downshift and rev to the near the redline easily and happily!!!!!

All in all, the underdrive pully is giving me better low-mid range power!

P.S. I will like to take this chance to special thanks to Garm for his fast response on email, lighting fast shipping & nicely bubble wrap the pulley to ensure pulley is all round protected from any mis-handling by postman. Kudos to you, Garm!!

NonStopTuning · 11-11-2009, 03:37 PM

Quote:

Originally Posted by evo165

Hi guys, i just installed the underdrive pully on my auto yaris!

On first test drive right after installing, i felt the engine idling is smoother. As i slowly accelerate to move off, i can feel the engine is having less "load" than before!

Now when i tried to apply more harder throttle, immediately the engine downshift and rev to the near the redline easily and happily!!!!!

All in all, the underdrive pully is giving me better low-mid range power!

P.S. I will like to take this chance to special thanks to Garm for his fast response on email, lighting fast shipping & nicely bubble wrap the pulley to ensure pulley is all round protected from any mis-handling by postman. Kudos to you, Garm!!

Glad to hear your happy review

NST & MI FTW

SLIK4 · 11-14-2009, 06:21 PM

i do not have any NST products but have read alot about them and respect them a great deal for making unbelievable products. i am really wanting the crank pulley a great and will hopefully get one in the future most likely from micro image

. just wanted to say thanks again to NST for being such a great source of info. i have learned a alot from reading on this thread.v

NST FTW!!!

NonStopTuning · 12-09-2009, 09:50 PM

Quote:

Originally Posted by SLIK4

i do not have any NST products but have read alot about them and respect them a great deal for making unbelievable products. i am really wanting the crank pulley a great and will hopefully get one in the future most likely from micro image

. just wanted to say thanks again to NST for being such a great source of info. i have learned a alot from reading on this thread.v

NST FTW!!!

Thank you SLIK! And if you like NST this much now, wait till you have some of our products on your car!!!

jonismyname · 12-20-2009, 09:28 PM

time to say my part. installed my 10% UD pulley in about 15-20 minutes in a garage with air tools. if you're a little person you'll prob have troubles getting the alternator loose... and i found removing just the two upper screws on the plastic fender thing was enough to get to the pulley...

immediate boost in throttle response, and acceleration. car feels lighter and more lively. i've done a number of mod's on the cheap to my car, including modified intake and axle back, and nothing has done more for my performance than my pulley i installed last night, regardless of cost. very happy with product and will recommend at every opportunity.

NonStopTuning · 12-20-2009, 11:22 PM

Quote:

Originally Posted by jonismyname

time to say my part. installed my 10% UD pulley in about 15-20 minutes in a garage with air tools. if you're a little person you'll prob have troubles getting the alternator loose... and i found removing just the two upper screws on the plastic fender thing was enough to get to the pulley...

immediate boost in throttle response, and acceleration. car feels lighter and more lively. i've done a number of mod's on the cheap to my car, including modified intake and axle back, and nothing has done more for my performance than my pulley i installed last night, regardless of cost. very happy with product and will recommend at every opportunity.

Thank you Jon. Glad to read your review and very happy that you are satisfied with your purchase.

Good luck and have fun with all your future projects!

yaris2010RS · 12-21-2009, 12:06 AM

is this tested on the 2010 1.5l yaris yet?

10-12-2009, 03:27 PM	#505
Astroman Modded Moderator View User's Garage Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007 Location: Wenatchee, WA Posts: 3,670	50k+ miles later, still doing this: __________________ Please visit my online store for computer stuff and Official Yarisworld decals!

11-14-2009, 06:21 PM	#518
SLIK4 Michael Drives: 07 Silver Yaris Sedan Join Date: May 2007 Location: Clearwater, Kansas Posts: 281	i do not have any NST products but have read alot about them and respect them a great deal for making unbelievable products. i am really wanting the crank pulley a great and will hopefully get one in the future most likely from micro image . just wanted to say thanks again to NST for being such a great source of info. i have learned a alot from reading on this thread.v NST FTW!!! Last edited by SLIK4; 11-14-2009 at 11:38 PM.

12-21-2009, 12:06 AM	#522
yaris2010RS View User's Garage Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009 Location: Angus, Ontario Posts: 1,891	is this tested on the 2010 1.5l yaris yet? __________________ If it has boobs or wheels sooner or later your gonna have problems with it

10-12-2009, 10:47 PM	#509
bwong2 View User's Garage Drives: 2009 Yaris Liftback S Join Date: Jun 2009 Location: Champaign, IL Posts: 17	hi. i'm about to install an underdrive pulley tomorrow morning and was reading over the diy from the other site. there mentions a tic tac sized dowel that makes me slightly nervous. was wondering if i could get one ahead of time just in case i lose this from napa or the dealer and what it might be called there. thanks in advance! Brian.

10-12-2009, 10:53 PM	#510
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	It's not hard to keep track of, but you REALLY don't want to lose it.

10-14-2009, 01:23 PM	#512
redglare45 View User's Garage Drives: 07 Sedan - 5 Speed Manual Join Date: May 2006 Location: Pomona / Pasadena, California Posts: 337	I just got the CR-Lite Pulley Set installed. Great product. Butt dyno says there's some gains in HP. Also, seems to me that it revs quicker. Oh btw, they were the BLUE pulley's I bought from a board member.

10-16-2009, 11:06 AM	#514
andries aka Jack Wolfskin Drives: Yaris Join Date: Oct 2008 Location: Spain Posts: 239	I have the 10% underdrive crankpulley on my 1.8 TS and it's a very,very great mod. Feels like a lot more horsepower.

11-11-2009, 08:08 AM	#516
evo165 View User's Garage Drives: peArL yAvItZ!! Join Date: Jul 2009 Location: tIny dOts iN AsiA Posts: 156	Hi guys, i just installed the underdrive pully on my auto yaris! On first test drive right after installing, i felt the engine idling is smoother. As i slowly accelerate to move off, i can feel the engine is having less "load" than before! Now when i tried to apply more harder throttle, immediately the engine downshift and rev to the near the redline easily and happily!!!!! All in all, the underdrive pully is giving me better low-mid range power! P.S. I will like to take this chance to special thanks to Garm for his fast response on email, lighting fast shipping & nicely bubble wrap the pulley to ensure pulley is all round protected from any mis-handling by postman. Kudos to you, Garm!!

12-20-2009, 09:28 PM	#520
jonismyname Drives: 08 liftback 5spd Join Date: Oct 2008 Location: adirondacks, ny Posts: 220	time to say my part. installed my 10% UD pulley in about 15-20 minutes in a garage with air tools. if you're a little person you'll prob have troubles getting the alternator loose... and i found removing just the two upper screws on the plastic fender thing was enough to get to the pulley... immediate boost in throttle response, and acceleration. car feels lighter and more lively. i've done a number of mod's on the cheap to my car, including modified intake and axle back, and nothing has done more for my performance than my pulley i installed last night, regardless of cost. very happy with product and will recommend at every opportunity.