DIY Ebay fog lights - Page 5 - Toyota Yaris Forums

as400g33k · 03-05-2007, 06:12 PM

yep, its included in the package.

Kitt · 03-13-2007, 03:41 PM

QUESTION:
I have mine installed this way:

I purchased the base for the bulbs but when i removed the bumper i found that the factory harness and plug was already there, followed the cable inside the dash and removed from the plug, connected that cable to a relay and from the relay to a fuse and that to a live line to the battery. The relay is powered by the key switched line and then to a switch. Problem is that the line marked in red in the diagram gets hot. Is this normal or what should i do to prevent this???
Kitt

Kitt · 03-21-2007, 08:06 PM

Low in should be the line that comes from your switch, low out should be ground, 30a in, from your battery and 30a out should go to your fogs... This is a standard type of relay, they usually have a diagram printed on its side, if you could post a picture of it i may help you better

rwseattle · 03-21-2007, 10:33 PM

My PC is not downloading the relay pix. I'm not sure why. I will downloaden tomorrow at work. The relay does not show any wiring diagram. It only says YLE YL-388-S Automotive relay 12V/40A. I got 4 connectors and they're all the same size. I will post pix tomorrow. Thanks for your help.

Kitt · 03-21-2007, 10:39 PM

It should have something like this...

post the picture anyways and i'll see what i can do

rwseattle · 03-22-2007, 04:48 PM

Hopefully this helps.

Kitt · 03-22-2007, 05:01 PM

ummmm not that much tough... you will need a continuity tester then to find it out. The 2 connectors that have continuity are ones that will go to the switch and to the ground, the other two ones will come from the fuse to the fog lights...
and try to post a bigger picture to see if it helps, focused on the pins of the relay

redyaris · 03-28-2007, 09:46 AM

Foglights installed and functional...the best mod for me yet!!!

rwseattle · 03-28-2007, 12:33 PM

I found the correct connection. I did use the continuity tester. I will post pictures of working fog lights soon. I'm installing a front strut bar and will post pictures all together. Thank you for your help.

rwseattle · 04-03-2007, 01:54 PM

Here a pic of wrk foglights.

jimcat · 04-09-2007, 12:19 PM

Quote:

Originally Posted by rwseattle

Here a pic of wrk foglights.

very good, you finally made it

yrsdrgn · 06-27-2007, 02:55 AM

Thanks Jimcat for the fog light kit!!! It came in one day ahead of schedule hehe.Will install on Friday night

yrsdrgn · 06-30-2007, 06:22 PM

Ok. Got them installed today. So happy

myt · 07-02-2007, 12:38 PM

Hey guys, I think that I am going to try and tackle this myself. Did you have to remove the bumper to install the fog lights?

Thanks,
MYT

tiksman · 07-02-2007, 04:11 PM

Quote:

Originally Posted by myt

Hey guys, I think that I am going to try and tackle this myself. Did you have to remove the bumper to install the fog lights?

Thanks,
MYT

No look at the first pics you can get to the fogs by just undoing the top of the bumper

yrsdrgn · 07-02-2007, 09:48 PM

I went though the wheel well and front bumper......not very smart but it got the job done and I ended up with a lot of bruises from my arm being squashed in there

myt · 07-02-2007, 11:56 PM

Gotcha I guess I was thrown off by your pic on the underside(or back of the bumper). thanks though guys, hopefully I'll get some pics when I finish it up :)

MYT

amt135a · 07-04-2007, 12:00 PM

wheel well remove the front pushpins and under the bumper remove the three self taping screws wheel well plastic will fold back giving plenty of room i wired direct to bat with inline fuse works fine just don't for get to turn them off

03-13-2007, 03:41 PM	#2
Kitt View User's Garage Drives: Thndr cl metallic HB 3 drs '05 Join Date: Mar 2006 Location: Panama City, Panama Posts: 793	QUESTION: I have mine installed this way: I purchased the base for the bulbs but when i removed the bumper i found that the factory harness and plug was already there, followed the cable inside the dash and removed from the plug, connected that cable to a relay and from the relay to a fuse and that to a live line to the battery. The relay is powered by the key switched line and then to a switch. Problem is that the line marked in red in the diagram gets hot. Is this normal or what should i do to prevent this??? Kitt __________________ 10 years... alive and kickin'!!

03-21-2007, 08:06 PM	#3
Kitt View User's Garage Drives: Thndr cl metallic HB 3 drs '05 Join Date: Mar 2006 Location: Panama City, Panama Posts: 793	Low in should be the line that comes from your switch, low out should be ground, 30a in, from your battery and 30a out should go to your fogs... This is a standard type of relay, they usually have a diagram printed on its side, if you could post a picture of it i may help you better __________________ 10 years... alive and kickin'!!

03-21-2007, 10:33 PM	#4
rwseattle Rwseattle View User's Garage Drives: 2007 Toyota Yaris (BASE) Join Date: Dec 2006 Location: Seattle, WA Posts: 130	Pix My PC is not downloading the relay pix. I'm not sure why. I will downloaden tomorrow at work. The relay does not show any wiring diagram. It only says YLE YL-388-S Automotive relay 12V/40A. I got 4 connectors and they're all the same size. I will post pix tomorrow. Thanks for your help.

03-21-2007, 10:39 PM	#5
Kitt View User's Garage Drives: Thndr cl metallic HB 3 drs '05 Join Date: Mar 2006 Location: Panama City, Panama Posts: 793	It should have something like this... post the picture anyways and i'll see what i can do __________________ 10 years... alive and kickin'!!

03-22-2007, 05:01 PM	#7
Kitt View User's Garage Drives: Thndr cl metallic HB 3 drs '05 Join Date: Mar 2006 Location: Panama City, Panama Posts: 793	ummmm not that much tough... you will need a continuity tester then to find it out. The 2 connectors that have continuity are ones that will go to the switch and to the ground, the other two ones will come from the fuse to the fog lights... and try to post a bigger picture to see if it helps, focused on the pins of the relay __________________ 10 years... alive and kickin'!!

03-05-2007, 06:12 PM	#1
as400g33k Drives: 05 YRS Silver Lining Metallic Join Date: Jan 2006 Location: Australia Posts: 249	yep, its included in the package.

03-28-2007, 09:46 AM	#8
redyaris Shiny Chromey Coolness View User's Garage Drives: 2007 Toyota Yaris Liftback Join Date: Feb 2007 Location: Orlando, FL Posts: 982	Foglights installed and functional...the best mod for me yet!!! __________________ Bringin the Bling to Yarisworld

03-28-2007, 12:33 PM	#9
rwseattle Rwseattle View User's Garage Drives: 2007 Toyota Yaris (BASE) Join Date: Dec 2006 Location: Seattle, WA Posts: 130	Thank you. I found the correct connection. I did use the continuity tester. I will post pictures of working fog lights soon. I'm installing a front strut bar and will post pictures all together. Thank you for your help.

06-27-2007, 02:55 AM	#12
yrsdrgn View User's Garage Drives: 2007 Yaris Join Date: Jan 2007 Location: SF,CA Posts: 1,874	Thanks Jimcat for the fog light kit!!! It came in one day ahead of schedule hehe.Will install on Friday night __________________

07-02-2007, 12:38 PM	#14
myt Drives: Blazing Blue 07 YAris Join Date: Jun 2007 Location: Laurel, MD Posts: 76	Hey guys, I think that I am going to try and tackle this myself. Did you have to remove the bumper to install the fog lights? Thanks, MYT

07-02-2007, 09:48 PM	#16
yrsdrgn View User's Garage Drives: 2007 Yaris Join Date: Jan 2007 Location: SF,CA Posts: 1,874	I went though the wheel well and front bumper......not very smart but it got the job done and I ended up with a lot of bruises from my arm being squashed in there __________________

07-02-2007, 11:56 PM	#17
myt Drives: Blazing Blue 07 YAris Join Date: Jun 2007 Location: Laurel, MD Posts: 76	Gotcha I guess I was thrown off by your pic on the underside(or back of the bumper). thanks though guys, hopefully I'll get some pics when I finish it up :) MYT

07-04-2007, 12:00 PM	#18
amt135a View User's Garage Drives: 3D LB Join Date: May 2007 Location: TEXAS Posts: 13	fogs install wheel well remove the front pushpins and under the bumper remove the three self taping screws wheel well plastic will fold back giving plenty of room i wired direct to bat with inline fuse works fine just don't for get to turn them off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ebay OEM style fog lights installed	fantabulousbaby	Cosmetic Modifications (Exterior/Interior)	29	04-28-2009 10:14 AM
EBAY OEM BUMPER FOG LIGHTS	Wayside	General Yaris / Vitz Discussion	41	01-09-2007 12:52 AM
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q.	fantabulousbaby	Cosmetic Modifications (Exterior/Interior)	22	08-29-2006 01:13 PM
"OEM" fog lights from ebay	drell42	Cosmetic Modifications (Exterior/Interior)	5	07-28-2006 09:21 AM
Liftback Fog Lights on eBay	Chris07LB	General Yaris / Vitz Discussion	8	07-24-2006 07:06 AM