06YarisRS's 2ZR-FE Swap 5-Door Hatchback (Automatic Transmission)

[tmontague]

I honestly don't remember I'll have to go through my build thread and see if I put any info there about it. I just remember having the same question as you but once I saw what the 1nz harness had that the 2zr didn't going to the trans, it became clear what had to be swapped. I never ordered any pins I just removed them from the connectors and moved them if I needed to.

Toyota pins and connectors are very hard to come by. This is why I am keeping my 1nz harness in storage in case I never need a connector.

[06YarisRS]

Originally Posted by tmontague

I honestly don't remember I'll have to go through my build thread and see if I put any info there about it. I just remember having the same question as you but once I saw what the 1nz harness had that the 2zr didn't going to the trans, it became clear what had to be swapped. I never ordered any pins I just removed them from the connectors and moved them if I needed to.

Toyota pins and connectors are very hard to come by. This is why I am keeping my 1nz harness in storage in case I never need a connector.

Thanks Trevor. I'm sure it will make sense when I go to do it. Where the pins go is not an issue. Where they come from is eluding me atm.

EDIT: I am going to review this thread in detail. It looks like it contains the answers I need:

http://www.yarisworld.com/forums/sho...light=2Zr+swap

I picked up the xD bracket that mounts to the timing cover and installed it. Pics are in post #84, page 5. I took your advice, lol, but I may be overdosing the Permatex