06YarisRS's 2ZR-FE Swap 5-Door Hatchback (Automatic Transmission)

[tmontague]

I re read my thread and realised that I never posted about it, it must have been in the thread you had read only.

Iirc I think I ended up pulling the pins and 3 wires I needed and added then to the xd harness. The one end of the wire go to the connector st the trans but the other end simply goes to knead of the small white connectors that attaches to the fuse box. This is what dawned on me when I was comparing both harnesses. I thought it went to the ecu but it simple grabs power/signal from the fuse box so it it a short piece of wire and really quick and easy to add to the xd harness without undoing the whole harness.

[06YarisRS]

Originally Posted by tmontague

I re read my thread and realised that I never posted about it, it must have been in the thread you had read only.

Iirc I think I ended up pulling the pins and 3 wires I needed and added then to the xd harness. The one end of the wire go to the connector st the trans but the other end simply goes to knead of the small white connectors that attaches to the fuse box. This is what dawned on me when I was comparing both harnesses. I thought it went to the ecu but it simple grabs power/signal from the fuse box so it it a short piece of wire and really quick and easy to add to the xd harness without undoing the whole harness.

Great. Thanks! I already installed my harness, but I think this can be done with it on the engine.