The 2zr-fe engine swap guide

[ArmstrongRacing]

Originally Posted by ilikerice

You are mixing scenario's up in 2 different posts and I can see how this can get confusing and intimidating for someone who is a newbie with wiring.

Im sorry for the confusion, but I mention the Corolla harness because thats what I'm using on my 2zr/yaris trans buid. I wanted to test ALL of the Corolla parts so no one else would have to. I want this to be easy for everyone, so again just to be clear........aside from the actual engine and accesories, USE EVERY PART FROM A SCION XD.

I know you guys would prefer this diy be formatted a certain way, but I am sharing this info with you guys as I go.

[CoryM]

Originally Posted by ArmstrongRacing

I know you guys would prefer this diy be formatted a certain way, but I am sharing this info with you guys as I go.

You're doing great. Keep it up! Whenever I do something worth sharing, I always find it difficult to document until after it's done. The effort is appreciated.

Cheers.

[3cyltrbo]

Originally Posted by CoryM

You're doing great. Keep it up! Whenever I do something worth sharing, I always find it difficult to document until after it's done. The effort is appreciated.

Cheers.

+1

[ArmstrongRacing]

Originally Posted by CoryM

Whenever I do something worth sharing, I always find it difficult to document until after it's done.

This is exactly how I felt about this diy, there is so much going on I feared a step would get forgotten if I waited until it was completed.

[beaker]

Originally Posted by ArmstrongRacing

This is exactly how I felt about this diy, there is so much going on I feared a step would get forgotten if I waited until it was completed.

You're doing great! Worthy of many accolades for doing and sharing with the rest of us this engine swap.

Would you mind posting the part # of the ECM you bought, and what it was for?(ie year make model and specific options)

[ArmstrongRacing]

Originally Posted by beaker

Would you mind posting the part # of the ECM you bought, and what it was for?(ie year make model and specific options)

I mentioned the ECM part# in post #23....for an automatic transmission it is: 89661-52F71.

Originally Posted by beaker

How did the wiring go for the corrolla harness to XD/yaris?

The Corolla harness has all of the necessary wires to connect successfully to the Yaris. The cons however are that it's a monumental task soldering all of the wires, and the ecm plug is not long enough to reach the original ECM location....I had to mount mine above the valve cover on the cowl. There are also a couple wires to change for the transmission plug.