Anyone near Denver want to help me?

[Old&InTheWay]

Is there anyone near Denver who has done either the DIY Keyless entry and/or the DYI cruise control mods that would be willing to help me out? I've done a few small electrical projects with motorcycles in the past, but I'd feel a lot more comfortable if I had someone with me who had done this before.

I can offer payment in the form of good beer.

Thanks!

[NEexpat]

Old,
These were the first two mods, additions, I did to my Yaris. All the info I used was gleaned from this forum. The detailed instructions are all here in this forum. I was nervous as all get out disconnecting the airbag for the CC, and terrified splicing the wires for the keyless entry thinking I would probably void my warranty etc. All went fine.

Hope someone comes through for you, good luck and welcome.

Let us know how it goes.

[Old&InTheWay]

Originally Posted by NEexpat

Old,
These were the first two mods, additions, I did to my Yaris. All the info I used was gleaned from this forum. The detailed instructions are all here in this forum. I was nervous as all get out disconnecting the airbag for the CC, and terrified splicing the wires for the keyless entry thinking I would probably void my warranty etc. All went fine.

Hope someone comes through for you, good luck and welcome.

Let us know how it goes.

Thanks for the encouragement. I will probably go for it with or without help, as the instructions do look very good and I am generally pretty good at figuring out things like this. It's the nervousness factor that is improved by having experienced help.

[nortonfb]

I had a bad experience, CT Scott showed great patience in helping.
It was me. Just take your time and double check each step.
You will be fine.
Norton