Quote:
Originally Posted by CTScott
You will follow the instructions for: -VEHICLE RELAY, GROUND SIDE CONTROL
The Yaris doesn't have a headlight on and then separate beam control switch, so you will use one relay to switch the light blue wire in pin 8 of the headlight stalk connector (low beams) to ground and the other relay to switch the white wire in pin 13 (tail lights) to ground.
|
Thanks CTScott, so basically I'll need to get 2 relays:
- Use 1st relay to switch the Pin 8 (HL) to ground.
- Use 2nd relay to switch Pin 13 (B1) to ground.
Pins to GND:
-toy