|
09-25-2010, 03:25 PM | #1 |
Rollerskate
|
Turbo setup
Well I got my turbo setup on my car aem fic is hooked up but I think I may have fucked up on the turbo car runs and is ok but I can't hear the turbo spool up it is a t3/t4 with a 55 trim compressor and a 58 trim turbine am I missing any thing or do I need a smaller turbo
|
09-25-2010, 08:48 PM | #2 |
Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010
Location: New Jersey
Posts: 875
|
...More info?
If you messed up the FIC wiring, the car most likely wouldn't even start. |
09-25-2010, 10:00 PM | #3 |
Rollerskate
|
When I use the jumper wire it works just fine spools and everything so there something I messed up but till I get back to pa and get the wiring redone and on the dyno I'm just going to try and stay put of boost :( but I'll keep y'all up to date if you wanna is my set go to my Facebook.com and look up my email drifter704@yahoo.com and add me as a friend and it well lost you see some pics
|
09-25-2010, 10:37 PM | #4 |
Drives: 2008 Yaris LB Join Date: Jul 2010
Location: PA
Posts: 899
|
Just sent a friend request to you.
My name is Wes. Also sent you a pm!!!
__________________
"And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010 |
09-25-2010, 11:30 PM | #5 |
Drives: 2008 yaris, stripped, red Join Date: Jan 2009
Location: SE Texas
Posts: 977
|
ok, i quit reading when i couldnt tell when one sentence ended and another begins. that was about 20 words into it and then i figured out i was wasting more time trying to determine where to stop reading a sentence and start a new one and then decided that it wasnt worth my time
good luck with life...hope you dont do this for your boss |
09-26-2010, 01:33 AM | #6 |
Rollerskate
|
setup
This is my turbo setup
|
09-26-2010, 01:41 AM | #7 |
Drives: 2008 Yaris LB Join Date: Jul 2010
Location: PA
Posts: 899
|
Did u build the kit yourself?
Where did you get the piping, etc? Looks good bro!!!
__________________
"And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010 |
09-26-2010, 02:13 AM | #8 |
Rollerskate
|
Got it all off ebay I know people hate on ebay but hey the have never let me do but
Yeah I did all the work on my own took about a week to get everything right It was worth every min of it |
09-26-2010, 02:56 AM | #9 |
Bathroom + Laptop = <3
|
whered you get the manifold? Thats how essentially I want mine, but A. I do not want to cut the wiper cowl if thats what you did or B. it looks like a bitch to make a downpipe or get to ECU.
|
09-26-2010, 08:03 AM | #10 |
Rollerskate
|
Igot it from eBay Right off hand I can't remember where when I can I'll post a link
I didn't have to cut the wiper cowl it sit about 2" down from it The turbo I used made me have to move the ecru in the cabin along with my aem fic For exhaust I had a shop make a custom 2 1/2" exhaust front to back so I really don't know how bad it was And it really matters what turbo you get for how to make the down pipe mine is a v band turbo so I just bought the 90 degree v band down pipe and the shop worked from that |
09-26-2010, 08:05 AM | #11 |
Rollerskate
|
03-06 SCION XB XA 1.5L CAST T25 TURBO EXHAUST MANIFOLD
That is the link for the manifold like my setup |
09-26-2010, 10:36 AM | #12 |
Drives: 2008 Yaris LB Join Date: Jul 2010
Location: PA
Posts: 899
|
Could have bought the manifold from Garm:) lol
Is ur turbo a 3 or 4 bolt? AND can u still use AC?
__________________
"And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010 |
09-26-2010, 01:11 PM | #13 |
Rollerskate
|
It is a 4 bolt mani exhaust is a v band clamp with a t3/t4 turbo like mine no a t25 maybe idk
|
09-26-2010, 02:26 PM | #14 |
C'est la vie
Drives: 2009 2 door hatchback Join Date: Aug 2009
Location: chicago
Posts: 482
|
Do you still have A/C lines? I thought about getting that manafold and turbo set up, but I was worried about A/C line clearance. I decided to go with a bottom mount. Get some heat wrap for that hairdryer and it will keep things much cooler under the hood. O ya, and big props too
|
09-26-2010, 09:20 PM | #15 |
Rollerskate
|
With the turbo I used I had to lose the ac
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
anyone wanna sale there turbo setup for $1000 | 1.5ty | Willing to Buy by private party | 0 | 06-02-2010 02:51 AM |
what are the basic components 4 turbo setup | jouna | Forced Induction Forum | 1 | 02-14-2010 03:26 PM |
HKS turbo timer type 1 | Tamago | Performance Modifications | 3 | 07-21-2009 11:59 AM |
Twin turbo dual exaust yaris 1NZ-FE setup? | CtrlAltDefeat | Forced Induction Forum | 92 | 05-21-2009 12:14 PM |