Corbeau CR-1 Seats Installed - Toyota Yaris Forums

Sabretooth · 04-25-2009, 10:36 PM

I cant rememer if I did this or not back in the day when the seats were installed in the car, its been about 4 months now.

So, heres some pics of them with harnesses, you can guestimate how high they sit according to the height of the seat in comparison to the steering wheel, even the seatbelt holders are there, so thats a good reference.

They do sit high on the Weapon R brackets, but I dont mind them, maybe one day I will have proper brackets ordered.

I took these pics from the passenger and drivers side. I still left the old OEM seatbelts in place, they might come out sometime in the future.

Yes I still get a stupid airbag and flashing seatbelt light. The passenger airbag in always OFF, and I plan to have a friend of mine do a resistor mod to have it placed in the ON position at all times. Not as if the harnesses wont let you hit the airbag anyway.

Remember that the Weapon R brackets dont fit any other seats than Sparco and Weapon R brands. I had mine custom modified to fit these seats.

yarstar · 04-25-2009, 10:41 PM

Dude. Those are HOT.

MPC Motorsports · 04-25-2009, 11:02 PM

Those seats are the bomb! Before my funds ran out last summer, I seriously looked at some aftermarket seats for my sedan. Maybe someday...

YAR1S · 04-25-2009, 11:17 PM

wow... those are the nicest seats I have seen by far.... very nice! they match so well!

Sabretooth · 04-25-2009, 11:32 PM

Thank you, many people have said the same thing about the match, some people even question if those come stock.

YAR1S · 04-25-2009, 11:34 PM

so.
whered you get them from and how much?

Sabretooth · 04-25-2009, 11:42 PM

Local guy on Craigslist who was getting rid of them from his Drag truck(96 Ford Ranger). The seats were only used 4 times total, the guy just wanted them gone..

$380 for the seats
$90 for the brackets
$180ish for the harnesses

Snagged them as what I think was the best deal on parts for my car to date!

YAR1S · 04-25-2009, 11:49 PM

wow.... lucky you!
what do they normally MSRP for?

Sabretooth · 04-25-2009, 11:50 PM

Well they are the CR1 Wide models, so they run usually $800-900, depending where you shop, just for the seats (pair). Then it comes to purchasing seat brackets and sliders.

YAR1S · 04-26-2009, 12:44 AM

wow good job with the find then!

eTiMaGo · 04-26-2009, 12:56 AM

looks great!

cali yaris · 04-26-2009, 01:10 AM

Quote:

Remember that the Weapon R brackets dont fit any other seats than Sparco and Weapon R brands. I had mine custom modified to fit these seats.

The Weapon R brackets also fit my Bride sliders.

Sabretooth · 04-26-2009, 01:50 AM

Hmm, good information to know ahead of time for anyone interested in getting Bride seats, another option.

ChinoCharles · 04-26-2009, 02:05 AM

OMG

Sabretooth · 04-26-2009, 02:24 AM

lol, I say the same for your Boostsnail setup

I am still trying to find a good material and nice way to redo my door panels in black to match the interior finally.

LtNoogie · 04-26-2009, 02:46 AM

Those are beautiful.

Sabretooth · 04-26-2009, 03:05 AM

ty, I say other than my coilovers, best investment yet for my car.

04-25-2009, 10:36 PM	#1
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Corbeau CR-1 Seats Installed I cant rememer if I did this or not back in the day when the seats were installed in the car, its been about 4 months now. So, heres some pics of them with harnesses, you can guestimate how high they sit according to the height of the seat in comparison to the steering wheel, even the seatbelt holders are there, so thats a good reference. They do sit high on the Weapon R brackets, but I dont mind them, maybe one day I will have proper brackets ordered. I took these pics from the passenger and drivers side. I still left the old OEM seatbelts in place, they might come out sometime in the future. Yes I still get a stupid airbag and flashing seatbelt light. The passenger airbag in always OFF, and I plan to have a friend of mine do a resistor mod to have it placed in the ON position at all times. Not as if the harnesses wont let you hit the airbag anyway. Remember that the Weapon R brackets dont fit any other seats than Sparco and Weapon R brands. I had mine custom modified to fit these seats. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-25-2009, 10:41 PM	#2
yarstar View User's Garage Drives: 2008 Absolute Red HB Join Date: Oct 2008 Location: Georgia Posts: 264	Dude. Those are HOT. __________________ AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB

04-25-2009, 11:32 PM	#5
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Thank you, many people have said the same thing about the match, some people even question if those come stock. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-25-2009, 11:42 PM	#7
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Local guy on Craigslist who was getting rid of them from his Drag truck(96 Ford Ranger). The seats were only used 4 times total, the guy just wanted them gone.. $380 for the seats $90 for the brackets $180ish for the harnesses Snagged them as what I think was the best deal on parts for my car to date! __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-25-2009, 11:50 PM	#9
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Well they are the CR1 Wide models, so they run usually $800-900, depending where you shop, just for the seats (pair). Then it comes to purchasing seat brackets and sliders. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-25-2009, 11:02 PM	#3
MPC Motorsports Drives: 2008 Yaris S Sedan Join Date: Apr 2009 Location: Oklahoma Posts: 78	Those seats are the bomb! Before my funds ran out last summer, I seriously looked at some aftermarket seats for my sedan. Maybe someday...

04-26-2009, 12:56 AM	#11
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	looks great! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

04-26-2009, 01:50 AM	#13
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Hmm, good information to know ahead of time for anyone interested in getting Bride seats, another option. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-26-2009, 02:05 AM	#14
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	OMG

04-26-2009, 02:24 AM	#15
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	lol, I say the same for your Boostsnail setup I am still trying to find a good material and nice way to redo my door panels in black to match the interior finally. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

04-26-2009, 02:46 AM	#16
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	Those are beautiful. __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

04-26-2009, 03:05 AM	#17
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	ty, I say other than my coilovers, best investment yet for my car. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible Group Buy.. Racing Seats, Intakes?	TinyGiant	Items for Sale by private party	60	09-11-2009 03:40 PM
FS: Recaro Pole Position Racing Seats (black) -- socal	03Z33	Items for Sale by private party	13	12-07-2008 06:08 PM
sparco seats and pedals (pics)	turboyaris	Cosmetic Modifications (Exterior/Interior)	18	09-05-2007 03:43 AM
Sport / Racing seats worth the while?	mikeukrainetz	Cosmetic Modifications (Exterior/Interior)	10	11-19-2006 02:17 PM
Yaris Liftback Seats	artyin	General Yaris / Vitz Discussion	3	04-30-2006 05:07 PM