RealCamber Camber Shims -5 degree Group Buy - Toyota Yaris Forums

Supra_Yaris · 10-29-2015, 01:33 PM

Hey guys I am trying to gauge interest in the -5 degree camber shims from realcamber.com. I have noticed the -5 degree shims have been sold out for a while now. So this week I contacted the owner, Dan, and he said they do not make them anymore and will probably not be making them anymore. I asked him to consider making a run if I can get together enough people. He said he would make a run if he could get 5-6 people. So with myself included, who else would be interested?

Again, these are the shims that provide -5 degrees of rear camber and correct the toe to almost absolute 0. These shims are a great product and I hear nothing but great news about them. Here is a link so you can check them out: http://www.realcamber.com/

Thanks guys!

AOR 1-1 · 01-06-2016, 12:45 PM

I would definitely be interested.

TerenceCruz · 01-07-2016, 03:52 AM

Wow I didn't know that along with the -5 camber, toe would be corrected to almost 0 as well. That's great. If it were -3 I would be interested but I don't think I need -5. Good luck though guys I hope you get enough people for this!

tadakun · 01-18-2016, 12:28 PM

I second the above post. -3 and I'd be interested.

AOR 1-1 · 01-20-2016, 12:00 AM

Any updates? Would he be interested in making a split run, part -3 part -5?

Supra_Yaris · 01-22-2016, 12:07 AM

I don't think so because he always makes the -3. He has to make the -5 special.

AOR 1-1 · 02-18-2016, 05:12 AM

Almost a month, any news?

sarap · 02-18-2016, 04:10 PM

I'd prob be interested any updates

trowa · 04-02-2016, 01:41 AM

hi i want a kit of camber shims, but could someone send me to chile.

10-29-2015, 01:33 PM	#1
Supra_Yaris Logan Drives: 2009 Yaris Liftback Base MT Join Date: Jan 2015 Location: Denton, TX Posts: 107	RealCamber Camber Shims -5 degree Group Buy Hey guys I am trying to gauge interest in the -5 degree camber shims from realcamber.com. I have noticed the -5 degree shims have been sold out for a while now. So this week I contacted the owner, Dan, and he said they do not make them anymore and will probably not be making them anymore. I asked him to consider making a run if I can get together enough people. He said he would make a run if he could get 5-6 people. So with myself included, who else would be interested? Again, these are the shims that provide -5 degrees of rear camber and correct the toe to almost absolute 0. These shims are a great product and I hear nothing but great news about them. Here is a link so you can check them out: http://www.realcamber.com/ Thanks guys!

01-06-2016, 12:45 PM	#2
AOR 1-1 Scraper Drives: '08 Yaris RS 5-Door Join Date: Nov 2014 Location: British Columbia, Canada Posts: 13	I would definitely be interested.

01-07-2016, 03:52 AM	#3
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Wow I didn't know that along with the -5 camber, toe would be corrected to almost 0 as well. That's great. If it were -3 I would be interested but I don't think I need -5. Good luck though guys I hope you get enough people for this!

01-18-2016, 12:28 PM	#4
tadakun Drives: 09 Yaris Join Date: Jul 2010 Location: Oregon Posts: 123	I second the above post. -3 and I'd be interested.

01-20-2016, 12:00 AM	#5
AOR 1-1 Scraper Drives: '08 Yaris RS 5-Door Join Date: Nov 2014 Location: British Columbia, Canada Posts: 13	Any updates? Would he be interested in making a split run, part -3 part -5?

01-22-2016, 12:07 AM	#6
Supra_Yaris Logan Drives: 2009 Yaris Liftback Base MT Join Date: Jan 2015 Location: Denton, TX Posts: 107	I don't think so because he always makes the -3. He has to make the -5 special.

02-18-2016, 05:12 AM	#7
AOR 1-1 Scraper Drives: '08 Yaris RS 5-Door Join Date: Nov 2014 Location: British Columbia, Canada Posts: 13	Almost a month, any news?

02-18-2016, 04:10 PM	#8
sarap Drives: red liftback egg Join Date: Feb 2016 Location: texas Posts: 88	I'd prob be interested any updates

04-02-2016, 01:41 AM	#9
trowa View User's Garage Drives: Toyota Yaris Sedan 2008 Join Date: May 2012 Location: Punta Arenas, Chile. Posts: 3	hi i want a kit of camber shims, but could someone send me to chile.