Sub/Amp Question Re: Impedence Load - Toyota Yaris Forums

H3LlIoN · 05-10-2010, 10:17 AM

Okay...quick question...

Can I drive four of these:

http://www.infinitysystems.com/car/p...=US&Region=USA

off one of these:

http://www.alpine-usa.com/US-en/prod...del=PDX-1.1000

Or will ohm load be too low and burn amp/subs?

Also, can someone post the math behind this, so I can understand it? Thanks,

- H

H3LlIoN · 05-10-2010, 10:20 AM

Oh and how much power will be making it to each sub? Thanks...

Palmer812 · 05-10-2010, 10:27 AM

That amp puts out the same power at 2 or 4 ohms(1000 watts at 14.4 volts at 1% thd). With 4 4 ohm subs you would want to run a series parallel configuration to end up at 4 ohms. That puts you at 250 watts each.

H3LlIoN · 05-10-2010, 10:30 AM

Disregarding the ohm load labels, is this the proper wiring sequence of which you speak?

Thanks,

Palmer812 · 05-10-2010, 12:37 PM

Yes sir.

H3LlIoN · 05-10-2010, 12:56 PM

Thank you Palmer!

05-10-2010, 10:17 AM	#1
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	Sub/Amp Question Re: Impedence Load Okay...quick question... Can I drive four of these: http://www.infinitysystems.com/car/p...=US&Region=USA off one of these: http://www.alpine-usa.com/US-en/prod...del=PDX-1.1000 Or will ohm load be too low and burn amp/subs? Also, can someone post the math behind this, so I can understand it? Thanks, - H __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

05-10-2010, 10:20 AM	#2
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	Oh and how much power will be making it to each sub? Thanks... __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

05-10-2010, 10:30 AM	#4
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	Disregarding the ohm load labels, is this the proper wiring sequence of which you speak? Thanks, __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

05-10-2010, 12:56 PM	#6
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	Thank you Palmer! __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-10-2010, 10:27 AM	#3
Palmer812 Drives: 2010 Meteorite Metallic LB Join Date: Feb 2010 Location: North Carolina Posts: 251	That amp puts out the same power at 2 or 4 ohms(1000 watts at 14.4 volts at 1% thd). With 4 4 ohm subs you would want to run a series parallel configuration to end up at 4 ohms. That puts you at 250 watts each.

05-10-2010, 12:37 PM	#5
Palmer812 Drives: 2010 Meteorite Metallic LB Join Date: Feb 2010 Location: North Carolina Posts: 251	Yes sir.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voltage regulator and Amperage question...	cr.chango	DIY / Maintenance / Service	13	11-24-2009 01:59 PM
ctrl-alt-delete question & free anti-virus question	Shroomster	Off-topic / Other Cars / Everything else Discussions	18	09-08-2009 04:57 AM
konig helium question?	liyux2k	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	5	05-08-2009 04:55 AM
Amplifier Watt Question....noob question	hasher22	In Car Entertainment + Electronics (audio / video / alarm)	4	09-27-2007 04:59 PM