|
12-30-2006, 07:33 PM | #1 |
Super Moderator
|
Build Your Own Intake PARTS
Have a few of these pieces for anyone looking to piece together an intake for cheap.
You PVC intake building guys, here's your MAF adapter. Tested our MAF in this, and it fit perfect. New MAF screws included. Inside diameter is 2", and filter adapter outside diameter will fit a 2 3/4" or larger aftermarket filter. * MAF adapter * EGR adapter * Filter adapter * Rubber coupler * 2 hose clamps $45 Shipped FedEx Ground! |
12-30-2006, 08:15 PM | #2 |
Drives: Polar White Hatch Join Date: Nov 2006
Location: chicago
Posts: 407
|
Is that pipe where the MAF sensor goes into the same size as stock? If that pipe is even slightly larger you are going to run lean since the sensor cannot read the increased volume of air.
__________________
ChinoCharles Intake supporter. |
12-30-2006, 08:19 PM | #3 |
Super Moderator
|
It is the same size. Its actually pieces from an xA intake, hacked up of course.
|
12-31-2006, 12:42 AM | #4 |
Drives: 2007 Yaris manual dark silver Join Date: May 2006
Location: Fond du Lac, WI
Posts: 694
|
idk maybe
__________________
7 Color Tach Fujita Intake Momo pedals Shift knob and boot. Full TRD SSK. Blitz exhaust Megan Lowering Springs (Next is DC Header) |
12-31-2006, 06:47 AM | #5 |
Super Moderator
|
|
01-01-2007, 07:24 PM | #6 |
Super Moderator
|
BUMP
|
03-06-2007, 01:09 PM | #7 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Thanks Chris, it just got here. You left out the rubber coupler and hose clamps, but I guess I'll forgive you.
|
03-06-2007, 01:17 PM | #8 |
Super Moderator
|
Crap.
Im sure you will manage. |
03-06-2007, 01:19 PM | #9 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
No big deal... both come cheap at Summit.
I can't wait for tonight! Gonna be interesting! |
03-07-2007, 08:24 AM | #10 |
Noypi ako!
Drives: 07 S Sedan 5-Speed M/T Join Date: Aug 2006
Location: South Cali
Posts: 226
|
ey chris do u have anymore of these?...i assume these are same for the xb also?
__________________
Nagka-anak sina boy at nene, isang lalaki at isang babae. binata't dalaga na sila... Nene jr.: tay, peram naman ng kotse o... Boy Bastos: sige pero isang kondisyon. mag-ano muna tayo. Nene jr.: tay meron ako ngayon e. blowjob na lang kita. Boy bastos: o sige. pagkatapos ng blowjob... Nene jr.: tay, bat lasang tae yung etits nyo? Boy bastos: ah ganon ba? hiniram kasi ng kuya mo kanina yung kotse e! |
03-07-2007, 05:00 PM | #11 |
Super Moderator
|
Gave away what I had to Chino..
|
03-08-2007, 02:13 AM | #12 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Hey esquiva, ill send them to you when I'm done with them. Hang tight.
|
03-08-2007, 11:06 AM | #13 |
Noypi ako!
Drives: 07 S Sedan 5-Speed M/T Join Date: Aug 2006
Location: South Cali
Posts: 226
|
cool...i have an airinx filter i wanna toy with...
__________________
Nagka-anak sina boy at nene, isang lalaki at isang babae. binata't dalaga na sila... Nene jr.: tay, peram naman ng kotse o... Boy Bastos: sige pero isang kondisyon. mag-ano muna tayo. Nene jr.: tay meron ako ngayon e. blowjob na lang kita. Boy bastos: o sige. pagkatapos ng blowjob... Nene jr.: tay, bat lasang tae yung etits nyo? Boy bastos: ah ganon ba? hiniram kasi ng kuya mo kanina yung kotse e! |
03-08-2007, 02:43 PM | #14 |
www.sebastienloeb.com
Drives: Citroën C4 & TOYOTA Yaris Join Date: Feb 2007
Location: Switzerland
Posts: 36
|
when buliding an intake with many pieces and tubes combain together, the air flow will not flow as free as an intake that is build with just one or two tubes together such as most of the aftermarket intake kits ( TRD, AEM, ect...) therefore you are better off getting an aftermarket intake kit to get the most air flow out of it.
__________________
http://www.sebastienloeb.com/ |
03-08-2007, 05:18 PM | #15 |
Noypi ako!
Drives: 07 S Sedan 5-Speed M/T Join Date: Aug 2006
Location: South Cali
Posts: 226
|
hmmm...i just needed the adapter though.......but that is a good point,sebastien
__________________
Nagka-anak sina boy at nene, isang lalaki at isang babae. binata't dalaga na sila... Nene jr.: tay, peram naman ng kotse o... Boy Bastos: sige pero isang kondisyon. mag-ano muna tayo. Nene jr.: tay meron ako ngayon e. blowjob na lang kita. Boy bastos: o sige. pagkatapos ng blowjob... Nene jr.: tay, bat lasang tae yung etits nyo? Boy bastos: ah ganon ba? hiniram kasi ng kuya mo kanina yung kotse e! |
03-08-2007, 07:06 PM | #16 |
Super Moderator
|
these parts where being used for mock up.. once everything is set the way they want it, im sure its all going to become one nice complete piece.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carbon Fiber parts | chino_potato | Cosmetic Modifications (Exterior/Interior) | 42 | 08-18-2007 12:49 PM |
WR Secret Weapon Intake Dyno Tested.. | WRLEO | Performance Modifications | 70 | 05-17-2007 03:00 PM |
question about parts to be fitted to 1.3L Auto Yaris | ASHRAF | Performance Modifications | 6 | 12-18-2006 05:16 AM |
What kind of parts you guys want? | Hyde | General Yaris / Vitz Discussion | 28 | 09-19-2006 12:12 AM |
Build Your Yaris, toyota.com | artyin | General Yaris / Vitz Discussion | 3 | 05-03-2006 04:52 PM |