Part Out - Toyota Yaris Forums

yariscupcar · 12-07-2015, 01:00 AM

As a continuation of my previous post on the micro image forum....

I have decided to take my yaris off of track and autoX duty due to my current build replacing it, going back to mostly stock.

I have a lot of parts still on the car, some harder to take off than others, here is what I have, I can post pictures, if there is any interest. I don't want to take everything off if it will not be going to a good new home.
(user 620311 on MI forum)

-Planted seat mount: $100 (shipping included) SOLD
-Planted side mounts: $50 (Shipping included) SOLD
-Tanabe Sustec Pro coil overs: $400 (all original documents) SOLD
-MI short shift (all parts): parts sold individually or as whole SOLD (all)
-MI red light weight crank pulley: $50 (shipping included) SOLD
-g-force wrap around cam lock harness $50 (shipping included, in date, sfi rated) SOLD
-Megan 7.5kg/mm rear springs: $40 shipped
-also have megan knock off header and apexi exhaust, not as excited to take these off, but I will for the right price, around $275 ($450 from MI) for the exhaust and $50 for the header

already sold a few parts on the MI forum, I can try to get previous feed back if wanted

willing to trade for a few things such as an OEM headliner or full OEM carpeting

KTS · 12-07-2015, 05:39 AM

Good day I am interested in the coilovers. Pm me pics or let me know if you will refer to email pics. What is the mileage on the coilovers?

Innovative 1 · 12-07-2015, 10:15 AM

Whats the exhaust set up? Size, cats resonator etc?

py4age · 12-07-2015, 01:14 PM

Are the two parts of the planted seat brackets needed for aftermarket seats?
Can you give more details please, thx.

yariscupcar · 12-07-2015, 02:08 PM

I will send a pm shortly.

As for the exhaust- not selling the entire exhaust system, just willing to part with the apexi muffler (weld on, 2-1/2", ran with no cat or resonator, not very loud outside the car at all)

For the brackets, yes they are everything you need to install an after market seat. (No slider rails). 1/8" steel, black, purchased from MI. I originally bought the side mounts first but due to the bolt placement needed the floor mount as well for correct positioning of the seat. You could use the bottom bracket alone, and mount a seat directly to that, but you would have to be really really tall to see over the dash haha

sr20-thoj · 12-07-2015, 07:04 PM

how much for complete short shifter?

jmanous · 12-07-2015, 07:24 PM

Do you still have the megan header?

py4age · 12-07-2015, 07:32 PM

Pmed for seat brackets.

yariscupcar · 12-07-2015, 11:13 PM

Quote:

Originally Posted by sr20-thoj

how much for complete short shifter?

when you say complete, you are saying you want the in-cabin and both outside parts along with the stiffer housing bushings? for all of that, I'd say $115 is fair, send me a PM please

also, did not receive the PM on the brackets, try a second maybe?

as for everything else, I will try to get back ASAP, things are hectic at the moment but I will try to take requested pictures as well!

thanks!

py4age · 12-08-2015, 08:37 AM

Quote:

Originally Posted by yariscupcar

also, did not receive the PM on the brackets, try a second maybe?
thanks!

Sent a PM again, maybe it doesn't work, maybe you can send me your email? thx

yariscupcar · 12-10-2015, 01:08 AM

PM's replied to, I know there was some trouble with PM's the other night, please feel free to resend if you do not think it made it's way through!

richietwong · 12-10-2015, 05:00 PM

can i get more information about the pulleys, (under drive, over drive, or standard?) Im interested.

invader166 · 12-10-2015, 06:16 PM

A lot of info on the pulley in this thread:

http://www.yarisworld.com/forums/sho...ghlight=pulley

In a nutshell, it's a standard OEM size pulley that's significantly lighter than the original one.

Most people have had good experiences with it, myself included.

For 1/3rd of the original price this is a smoking deal! Grab it before it's gone.

yariscupcar · 12-10-2015, 11:18 PM

long story short, it is under driven - less rotating mass - free up parasitic power loss. It was one of my fist mods (JUST the MI crank pulley, NOT the NST set).

Frank the Tank · 12-12-2015, 08:58 AM

pm sent. let me know if you got it

yariscupcar · 12-15-2015, 02:42 AM

Sent

yariscupcar · 12-16-2015, 09:51 PM

All new pm's responded too , here is a pic of the full short shift kit and cage bushings

yariscupcar · 12-20-2015, 04:57 PM

MI pulley

12-07-2015, 01:00 AM	#1
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	Part Out As a continuation of my previous post on the micro image forum.... I have decided to take my yaris off of track and autoX duty due to my current build replacing it, going back to mostly stock. I have a lot of parts still on the car, some harder to take off than others, here is what I have, I can post pictures, if there is any interest. I don't want to take everything off if it will not be going to a good new home. (user 620311 on MI forum) -Planted seat mount: $100 (shipping included) SOLD -Planted side mounts: $50 (Shipping included) SOLD -Tanabe Sustec Pro coil overs: $400 (all original documents) SOLD -MI short shift (all parts): parts sold individually or as whole SOLD (all) -MI red light weight crank pulley: $50 (shipping included) SOLD -g-force wrap around cam lock harness $50 (shipping included, in date, sfi rated) SOLD -Megan 7.5kg/mm rear springs: $40 shipped -also have megan knock off header and apexi exhaust, not as excited to take these off, but I will for the right price, around $275 ($450 from MI) for the exhaust and $50 for the header already sold a few parts on the MI forum, I can try to get previous feed back if wanted willing to trade for a few things such as an OEM headliner or full OEM carpeting Last edited by yariscupcar; 02-26-2016 at 03:43 PM.

12-10-2015, 06:16 PM	#13
invader166 Pumpman Drives: 2019 Kia Soul EV Base Join Date: Dec 2014 Location: Langley, BC Posts: 434	A lot of info on the pulley in this thread: http://www.yarisworld.com/forums/sho...ghlight=pulley In a nutshell, it's a standard OEM size pulley that's significantly lighter than the original one. Most people have had good experiences with it, myself included. For 1/3rd of the original price this is a smoking deal! Grab it before it's gone. __________________ "I would rather loose by a mile in a car I built myself, then win by an inch in a car that was built for me." - Moog

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Vitz RS (and G's) Tail Lights: Part Numbers, Ordering, and Installation	keiri	Third Gen Yaris General Discussion	26	09-04-2020 12:01 AM
DIY - Carbon fiber wrapping	Brian	Wash, Wax, Detailing, Exterior Repairs	15	07-10-2016 12:34 PM
Need help finding the Japanese part number for the TRD Sway Bar (PTR11-52071)	chalked	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	01-26-2013 02:29 PM
2008 OEM S model Liftback Lip kit Part numbers	PETERPOOP	Cosmetic Modifications (Exterior/Interior)	17	07-26-2010 01:33 PM
NEED HELP - Yaris suspension part	Trish	General Yaris / Vitz Discussion	10	11-07-2009 01:44 PM

12-07-2015, 05:39 AM	#2
KTS Drives: Vitz RS Join Date: Feb 2009 Location: Trinidad and Tobago Posts: 272	Good day I am interested in the coilovers. Pm me pics or let me know if you will refer to email pics. What is the mileage on the coilovers?

12-07-2015, 10:15 AM	#3
Innovative 1 Drives: 2007 Yaris HB 5spd Join Date: Jan 2015 Location: Glendive, MT Posts: 166	Whats the exhaust set up? Size, cats resonator etc?

12-07-2015, 01:14 PM	#4
py4age Drives: 09 Yaris LB M/T Join Date: Nov 2015 Location: Gatineau (QC) Posts: 9	Are the two parts of the planted seat brackets needed for aftermarket seats? Can you give more details please, thx.

12-07-2015, 02:08 PM	#5
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	I will send a pm shortly. As for the exhaust- not selling the entire exhaust system, just willing to part with the apexi muffler (weld on, 2-1/2", ran with no cat or resonator, not very loud outside the car at all) For the brackets, yes they are everything you need to install an after market seat. (No slider rails). 1/8" steel, black, purchased from MI. I originally bought the side mounts first but due to the bolt placement needed the floor mount as well for correct positioning of the seat. You could use the bottom bracket alone, and mount a seat directly to that, but you would have to be really really tall to see over the dash haha

12-07-2015, 07:04 PM	#6
sr20-thoj Drives: yaris Join Date: Sep 2011 Location: MN Posts: 41	how much for complete short shifter?

12-07-2015, 07:24 PM	#7
jmanous Drives: Toyota Yaris Sedan 2007 Join Date: Jun 2015 Location: NJ Posts: 30	Do you still have the megan header?

12-07-2015, 07:32 PM	#8
py4age Drives: 09 Yaris LB M/T Join Date: Nov 2015 Location: Gatineau (QC) Posts: 9	Pmed for seat brackets.

12-10-2015, 01:08 AM	#11
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	PM's replied to, I know there was some trouble with PM's the other night, please feel free to resend if you do not think it made it's way through!

12-10-2015, 05:00 PM	#12
richietwong Drives: yaris Join Date: Aug 2014 Location: United States Posts: 7	can i get more information about the pulleys, (under drive, over drive, or standard?) Im interested.

12-10-2015, 11:18 PM	#14
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	long story short, it is under driven - less rotating mass - free up parasitic power loss. It was one of my fist mods (JUST the MI crank pulley, NOT the NST set).

12-12-2015, 08:58 AM	#15
Frank the Tank Drives: 2007 Toyota Yaris Join Date: Nov 2015 Location: Toronto Posts: 78	pm sent. let me know if you got it

12-15-2015, 02:42 AM	#16
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	Sent

12-16-2015, 09:51 PM	#17
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	All new pm's responded too , here is a pic of the full short shift kit and cage bushings

12-20-2015, 04:57 PM	#18
yariscupcar Drives: '08 Yaris hatch Join Date: Nov 2011 Location: Dayton, OH Posts: 50	MI pulley