Foot Rest/Dead Pedal - Toyota Yaris Forums

MadMax · 10-21-2008, 11:25 PM

OK, I've only had my Yaris since Saturday evening; but one of the first things I noticed was the lack of a foot rest/dead pedal. I did a search but found very little, and with the recent hacking on this site there are a lot of posts from the last year that are gone; so I am hoping someone has found a solution and can post it here.

BTW, my neighbor works at the Tundra plant here in town, so something from that vehicle may be easy to obtain!

Cheers! M2

bdc87 · 10-22-2008, 12:07 AM

Kargoboy has one in a kit.

PreciousPups4U · 10-22-2008, 12:12 AM

I have the set from kargoboy. His site is www.yarisuniverse.com. Works great. Very nice set.

YarisSedan · 10-22-2008, 12:28 AM

I have the same set. It is very good quality. I think its a oem assesory in taiwan. Plus it was very cheap too. I think i paid like 30 dollars shipped or close to that.

It was a little hard to isntall though. word of advice use some soapy water when installing the pads. I found that trick out after fighting nonstop for nearly 30 minutes to pop the gas pedal on.

The dead pedal took some trial and error. You will see what i mean if you purchase it.

largeorangefont · 10-22-2008, 01:22 AM

I got a rubber floormat from pepboys and cut it to fit, then used double sided tape to hold it in place. It has been there for 18 months.

engelm_ · 10-22-2008, 03:05 AM

ooh, that looks nice

DFA · 10-22-2008, 06:47 AM

Tempting...

eii · 10-22-2008, 08:45 AM

I got the same pedals. The only hard one to get on was the gas pedal. I trimmed a bit of it off, mainly the bottom part if I remember right. After that it went on with little effort and stayed on without any problems. The only downside is its meant for a/t only so theres is no cover for the clutch. I got an a/t though ;).

engelm_ · 10-22-2008, 12:54 PM

It is very tempting, i must agree

andries · 10-22-2008, 12:57 PM

Custom made by myself

10-21-2008, 11:25 PM	#1
MadMax Drives: 2008 Yaris Liftback (Sprocket) Join Date: Oct 2008 Location: San Antonio, Texas! Posts: 2,799	Foot Rest/Dead Pedal OK, I've only had my Yaris since Saturday evening; but one of the first things I noticed was the lack of a foot rest/dead pedal. I did a search but found very little, and with the recent hacking on this site there are a lot of posts from the last year that are gone; so I am hoping someone has found a solution and can post it here. BTW, my neighbor works at the Tundra plant here in town, so something from that vehicle may be easy to obtain! Cheers! M2

10-22-2008, 03:05 AM	#6
engelm_ Yea, I'm Awesome View User's Garage Drives: 08' Sedan Join Date: Oct 2008 Location: Redlands, CA Posts: 209	ooh, that looks nice __________________ Meg (+410 posts prior 10/18/08; Real Join Date: Jan 2008) "Haha i would never call your car conservative." Richie Perrette

10-22-2008, 06:47 AM	#7
DFA Compulsive Washer Drives: 08' AT Meteorite Metallic LB Join Date: Oct 2008 Location: Panama City, Panama Posts: 395	Tempting... __________________

10-22-2008, 08:45 AM	#8
eii Rides canyon walls Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007 Location: Long Beach, CA Posts: 503	I got the same pedals. The only hard one to get on was the gas pedal. I trimmed a bit of it off, mainly the bottom part if I remember right. After that it went on with little effort and stayed on without any problems. The only downside is its meant for a/t only so theres is no cover for the clutch. I got an a/t though ;). __________________ OEM Style Wing Spoiler \| TRD Axle-Back Exhaust \| Megan Lowering Springs (1.5 f/r) \| Simota Carbon Charger Intake \| Python 871XP Alarm System \| Aluminum Sports Pedal \| 17x7 +42mm Enkei J10 Black w/ Silver Lip \| 205/40 Falken Ziex-912 \| NST Lite Crank Pulley Red \| 1ZZ-FE Throttle Body \| AMK Racing Header

10-22-2008, 12:54 PM	#9
engelm_ Yea, I'm Awesome View User's Garage Drives: 08' Sedan Join Date: Oct 2008 Location: Redlands, CA Posts: 209	It is very tempting, i must agree __________________ Meg (+410 posts prior 10/18/08; Real Join Date: Jan 2008) "Haha i would never call your car conservative." Richie Perrette

10-22-2008, 12:07 AM	#2
bdc87 HISTORY REPEATED 11/04/08 View User's Garage Drives: 07' MM Vitz LB Join Date: Jun 2007 Location: Lake County, CA Posts: 355	Kargoboy has one in a kit.

10-22-2008, 12:28 AM	#4
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	I have the same set. It is very good quality. I think its a oem assesory in taiwan. Plus it was very cheap too. I think i paid like 30 dollars shipped or close to that. It was a little hard to isntall though. word of advice use some soapy water when installing the pads. I found that trick out after fighting nonstop for nearly 30 minutes to pop the gas pedal on. The dead pedal took some trial and error. You will see what i mean if you purchase it.

10-22-2008, 01:22 AM	#5
largeorangefont Break'em off some. View User's Garage Drives: 07 Yaris LB, 04 Cobra Join Date: Jan 2007 Location: So Cal, OC Posts: 854	I got a rubber floormat from pepboys and cut it to fit, then used double sided tape to hold it in place. It has been there for 18 months.

10-22-2008, 12:57 PM	#10
andries aka Jack Wolfskin Drives: Yaris Join Date: Oct 2008 Location: Spain Posts: 239	Custom made by myself

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accelerator pedal located too close to hump	breyers	DIY / Maintenance / Service	18	09-07-2010 05:48 AM
Gas pedal problem?	Befuddled	Performance Modifications	28	01-27-2010 10:55 AM
Dead Pedal	absenter	Cosmetic Modifications (Exterior/Interior)	5	03-31-2007 06:47 PM
Gas pedal	fmicle	DIY / Maintenance / Service	12	03-31-2007 01:08 PM
Pedal covers and dead pedals.. what is out there we can use?	largeorangefont	Cosmetic Modifications (Exterior/Interior)	8	01-15-2007 05:55 PM