16x7 +38mm front, 16x8 +0 rear WILL IT FIT? - Toyota Yaris Forums

wildmongoose26 · 03-18-2009, 03:10 AM

wanting new wheels, and i was informed the Yaris setup is like the xb, so you need a wide wheel or low offset to flush out the rear wheels.
Just wanna know if this offset is enough to get me remotely close to flush. I dont wanna know go totally flush, or have some poke until i get coilovers. As of now im just getting the lowest Tien springs.
Thanx

Angela

White Yaris · 03-18-2009, 03:12 AM

Front would work but little rubbing. Rear with that offset i highly doubt it. Maybe 30 or 35+ offset would be great.

wildmongoose26 · 03-18-2009, 03:25 AM

what is the problem going to be? I would be using 195/50/16's to help clear with a bit of stretch.

CASTREX · 03-18-2009, 01:14 PM

16x8 with 0 offset you will be WAY outside the fender!

A 35+ rear should give you the flush look.

OH BTW, NO the Yaris is not like the xB...!

the xB has more room....

cali yaris · 03-18-2009, 01:59 PM

I have a set of wheels like that, Nilos for sale.

elmo · 03-19-2009, 03:28 PM

Quote:

Originally Posted by cali yaris

I have a set of wheels like that, Nilos for sale.

what do you want for them and pic please

cm07yaris · 03-18-2009, 03:10 PM

Here is a 16x7 +33 with a 205/50 for reference...

Split · 03-18-2009, 03:40 PM

^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

cm07yaris · 03-18-2009, 06:01 PM

Quote:

Originally Posted by Split

^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

Can't always believe what you read...it's also lowered 1.75"

Black Yaris · 03-18-2009, 08:31 PM

Quote:

Originally Posted by Split

^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

only true for the front.... and it depends upon the tire set-up as well

I could tuck those +0 offsets' no prob!

UKblackyari · 03-19-2009, 08:30 AM

im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

Thirty-Nine · 03-19-2009, 02:26 PM

Quote:

Originally Posted by UKblackyari

im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

What size tires are you running?

CASTREX · 03-19-2009, 05:46 PM

Quote:

Originally Posted by UKblackyari

im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

If you are not rubbing the crap out of the inner plastic fenders with the basics....

Then you are not driving fast enough !!

kngrsll · 03-18-2009, 06:26 PM

Quote:

Originally Posted by cm07yaris

Here is a 16x7 +33 with a 205/50 for reference...

now thats how a wheel should fit.

im orginally from kenosha, WI. i live down in south carolina now, been here for ten years now.

Nagoya_TRD. · 03-18-2009, 03:44 PM

best way to find out is to measure it up. a + 0 will definitely take some good coilovers and fender modifications (rolling and maybe a pull).

cm07yaris · 03-18-2009, 08:12 PM

Also, here's a 16x7 +42 with a 205/50 up front...

wildmongoose26 · 03-19-2009, 11:56 AM

those look good, but going for a bit of a different look. More flush, maybe even a little poke, with some mildly stretched tires.

Angela

marcus · 04-07-2009, 04:36 PM

i wish 16x8 with +0 offset work ..my wishful thinkin..*sigh* there goes sportsmax wheel

03-18-2009, 03:10 AM	#1
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	16x7 +38mm front, 16x8 +0 rear WILL IT FIT? wanting new wheels, and i was informed the Yaris setup is like the xb, so you need a wide wheel or low offset to flush out the rear wheels. Just wanna know if this offset is enough to get me remotely close to flush. I dont wanna know go totally flush, or have some poke until i get coilovers. As of now im just getting the lowest Tien springs. Thanx Angela

03-18-2009, 03:12 AM	#2
White Yaris Broke Tuner View User's Garage Drives: White Yaris Join Date: Oct 2008 Location: Warm Orange County Posts: 146	Front would work but little rubbing. Rear with that offset i highly doubt it. Maybe 30 or 35+ offset would be great. __________________ EVERYTHING YOU KNOW IS WRONG

03-18-2009, 01:59 PM	#5
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I have a set of wheels like that, Nilos for sale. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
Consumer Reports not too pleased with Yaris	Befuddled	General Yaris / Vitz Discussion	132	02-28-2011 03:57 PM
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 07:42 PM

03-18-2009, 03:25 AM	#3
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	what is the problem going to be? I would be using 195/50/16's to help clear with a bit of stretch.

03-18-2009, 01:14 PM	#4
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	16x8 with 0 offset you will be WAY outside the fender! A 35+ rear should give you the flush look. OH BTW, NO the Yaris is not like the xB...! the xB has more room....

03-18-2009, 03:10 PM	#7
cm07yaris View User's Garage Drives: 2007 Toyota Yaris Blazing Blue Join Date: May 2007 Location: Appleton, WI Posts: 647	Here is a 16x7 +33 with a 205/50 for reference...

03-18-2009, 03:40 PM	#8
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

03-19-2009, 08:30 AM	#11
UKblackyari Drives: yaris Join Date: Oct 2008 Location: UK Posts: 20	im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

03-18-2009, 03:44 PM	#15
Nagoya_TRD. Drives: None. Join Date: Feb 2009 Location: SoCal Posts: 131	best way to find out is to measure it up. a + 0 will definitely take some good coilovers and fender modifications (rolling and maybe a pull).

03-18-2009, 08:12 PM	#16
cm07yaris View User's Garage Drives: 2007 Toyota Yaris Blazing Blue Join Date: May 2007 Location: Appleton, WI Posts: 647	Also, here's a 16x7 +42 with a 205/50 up front...

03-19-2009, 11:56 AM	#17
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	those look good, but going for a bit of a different look. More flush, maybe even a little poke, with some mildly stretched tires. Angela

04-07-2009, 04:36 PM	#18
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	i wish 16x8 with +0 offset work ..my wishful thinkin..sigh there goes sportsmax wheel