A bit angry with alarm install

[gabriel2012]

Okay so today I got my alarm installed but before I tell you about my problem I will talk to you about the cars in Puerto Rico

the base yaris comes with a factory alarm (activates when all doors are closed with the key,no remotes or anything) the tech package has alarm, power everything etc but I have the base model with power nada


Sounds secure right? 2 alarms YEAH!

Nope the car(stock alarm) thinks someone is breaking and goes off in every time I open it with the remote(aftermarket alarm)

is there anyway to disable the stupid useless stock yaris alarm? thanks!

[CTScott]

What is the stock alarm that comes on the PR spec Yaris? Is it the TVIP RS3200, with which there is a module to the right behind the lower passenger side glove box?

[big lo]

The only change that I know is only the radio, the alarm set up is the same, So CT help the man, my dude he is calling for you bro

[gabriel2012]

Idk if we have the same manual but I believe its explained there

I will have a look under the dash tomorrow night as I left to spend new years eve with the family

[gabriel2012]

Hey scott I called the alarm guy and apparently the problem was that I was unlocking the rear hatch with the aftermarket alarm still armed.

but still is there anyway to at least disable the stock alarm? a fuse, wire or something?

[Palmer812]

CTScott is very smart and may know of a better way but here is what I would do assuming it is the same as our U.S. Yari. Take the status output wire from the aftermarket alarm and hook it to the keysense wire in the car. That wire is yellow and has a - trigger. It can be found at the ignition switch or at pin 7 in the 14 pin plug in the fuse box under the dash. That will allow the aftermarket alarm to disarm the factory alarm.

[CTScott]

Originally Posted by Palmer812

CTScott is very smart and may know of a better way but here is what I would do assuming it is the same as our U.S. Yari. Take the status output wire from the aftermarket alarm and hook it to the keysense wire in the car. That wire is yellow and has a - trigger. It can be found at the ignition switch or at pin 7 in the 14 pin plug in the fuse box under the dash. That will allow the aftermarket alarm to disarm the factory alarm.

That's definitely may be one way of doing it.

[H3LlIoN]

Originally Posted by Palmer812

Take the status output wire from the aftermarket alarm and hook it to the keysense wire in the car.

I looked at the wiring diagram for the unit he bought...it's pretty basic, and designed as a basic immobilizer for a car with no security system previously installed. It does not have wires for tying in to a factory alarm.

[H3LlIoN]

yeah, it has lock/unlock, but that's the problem he has in the other thread. They used arm/disarm instead of lock unlock.