springs need to settle - Toyota Yaris Forums

mastaofdisasta · 05-12-2009, 12:29 AM

I just installed my df210s on the fron of my car, ima do the back tomorrow. It does look alllll that low, do springs take time to settle a bit? And yes i did install em right. i mean it looks lower but not allll that much lower

tristan · 05-12-2009, 01:26 AM

have you moved your car yet? if not, take the parking brake off and back it up a little.
that's how it was for me anyways, i installed my trd springs in the back first and it barley looked low and i kept saying "oh they just have to settle" but then i wanted to make sure everything was good so i took the parking break off and backed up and heard a loud noise, got out to check and it was nice and lowered! oh and nothing was wrong lol

YarisSedan · 05-12-2009, 02:09 AM

My trd springs settle a bit after about a month. one day i just woke up and noticed may car seemed lower than before.

severous01 · 05-12-2009, 12:06 PM

what i did with my 4.5" lifted jeep was to find a tree stump or something relatively high and park one wheel on it for a few hrs....

but in your case you might wanna use a deck of cards or a 2x4 or something to push the wheel up a little....after a few hrs rotate to another wheel. JUST ONE WHEEL AT A TIME...this puts maximum compression on that wheel and takes much less time than doing 2 at a time.

thebarber · 05-12-2009, 12:12 PM

wait for a couple weeks....a couple thousand miles...

05-12-2009, 12:29 AM	#1
mastaofdisasta Drives: yaris Join Date: Oct 2008 Location: amerika Posts: 258	springs need to settle I just installed my df210s on the fron of my car, ima do the back tomorrow. It does look alllll that low, do springs take time to settle a bit? And yes i did install em right. i mean it looks lower but not allll that much lower __________________ ballin on a budget.

05-12-2009, 12:12 PM	#5
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	wait for a couple weeks....a couple thousand miles... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bump stop length for drop springs.	PetersRedYaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	19	02-17-2010 09:37 AM
TRD Springs Vs Tanabe DF210...The Title Bout	detroiter	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	47	05-23-2009 11:02 PM
What springs should I get? Help!	CtrlAltDefeat	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	10	01-26-2009 07:32 PM
Tein Basic Damper Coliey's Vs. Tein S. Tech Springs	ToTo	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	35	05-07-2007 06:08 PM
Lowering Springs - Questions ~ AGAIN ~	jaspie	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	9	01-16-2007 01:23 AM

05-12-2009, 01:26 AM	#2
tristan it's been a while View User's Garage Drives: 2009 liftback Join Date: Oct 2008 Location: Orlando, FL Posts: 110	have you moved your car yet? if not, take the parking brake off and back it up a little. that's how it was for me anyways, i installed my trd springs in the back first and it barley looked low and i kept saying "oh they just have to settle" but then i wanted to make sure everything was good so i took the parking break off and backed up and heard a loud noise, got out to check and it was nice and lowered! oh and nothing was wrong lol

05-12-2009, 02:09 AM	#3
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	My trd springs settle a bit after about a month. one day i just woke up and noticed may car seemed lower than before.

05-12-2009, 12:06 PM	#4
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	what i did with my 4.5" lifted jeep was to find a tree stump or something relatively high and park one wheel on it for a few hrs.... but in your case you might wanna use a deck of cards or a 2x4 or something to push the wheel up a little....after a few hrs rotate to another wheel. JUST ONE WHEEL AT A TIME...this puts maximum compression on that wheel and takes much less time than doing 2 at a time.