Engine Mounting - Toyota Yaris Forums

Nas_RS · 01-10-2010, 03:56 AM

Hello,

Anyone know to check the Engine mounting support, if is ok or broken..

what is the negative effect you get when it is damage

yaris-me · 01-10-2010, 04:31 AM

I would think that you would have problems with your CV joint or axle before the engine mount. You would hear a clunk sound when engaging the clutch or shifting.

Nas_RS · 01-10-2010, 04:57 AM

its not when shifting, i get the clunk sound when holding the acceleration on first or second shift..like a knocking sound, sometime doesnt get it when fast shifting of first and second shift

Nas_RS · 01-16-2010, 02:38 AM

anyone know part number of the engine mounting rear, left and upper..

for toyota vitz rs 1.5 NCP91

YarisSedan · 01-16-2010, 03:09 AM

I get the same sound. Our cars dont have a front engine mount like 99 percent of all the other cars on the market. I supose to save cost and i guess they figured a economy car with small power engine wont have that much torque. But quick shifts will make the engine jerk a bit.

You can get a nitto torque dampner which does help a bit or a stiffer rear mount such as trd or a solid one.

Nas_RS · 01-16-2010, 03:17 AM

yes you right, we dont have front engine mount.

mine rear one is damage, do you know where i can order it.

cali yaris · 01-16-2010, 03:23 AM

the rear one is underneath, also called the trans mount or "dogbone".
In the engine bay are the left and right engine mounts.

Please describe the damage, there's not much that can go wrong with that.

Nas_RS · 01-16-2010, 03:32 AM

Thanks for the help, do you know where to order or the part number of the 3 mount kit

goku87 · 01-16-2010, 04:12 AM

Not sure if this helps:

http://www.partstrain.com/store/inde...Engine%20Mount

YarisSedan · 01-16-2010, 04:44 AM

Looks like its time to order a trd one from garm then

Nas_RS · 01-16-2010, 05:27 AM

yes TRD much better and torque, anyone know where to order online

Nas_RS · 01-16-2010, 05:28 AM

diagram engine mount
http://www.toyodiy.com/parts/p_J_200...HMVK_1107.html

YaYa1320 · 01-19-2010, 10:27 AM

I just filled the voids in the "dogbone" mount with 3M window weld. It cut down on the movement ALOT, and it was 18 bucks for the tube @ pep boys.

YarisSedan · 01-19-2010, 06:26 PM

Quote:

Originally Posted by YaYa1320

I just filled the voids in the "dogbone" mount with 3M window weld. It cut down on the movement ALOT, and it was 18 bucks for the tube @ pep boys.

Yeah but how bad is the vibration.

cali yaris · 01-19-2010, 06:28 PM

shouldn't be too bad. The TRD one is harder rubber than stock, and it doesn't add much to the noise in the cabin.

YaYa1320 · 01-20-2010, 08:12 AM

Not bad at all. I have always used stiff inserts in honda mounts for years, and the vibration in the Yaris with the window weld in the mount is not noticeable to me, but the engine movement is greatly reduced. I could feel the engine rocking back and forth before I did this, now I dont feel it rocking. I like it

01-10-2010, 03:56 AM	#1
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	Engine Mounting Hello, Anyone know to check the Engine mounting support, if is ok or broken.. what is the negative effect you get when it is damage

01-16-2010, 03:23 AM	#7
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	the rear one is underneath, also called the trans mount or "dogbone". In the engine bay are the left and right engine mounts. Please describe the damage, there's not much that can go wrong with that. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-16-2010, 04:12 AM	#9
goku87 Drives: Black HB Join Date: Oct 2008 Location: AK Posts: 542	Not sure if this helps: http://www.partstrain.com/store/inde...Engine%20Mount __________________ Selling: [NST Short Shift Kits] [Clazzio Seat Covers] [Carbon Fiber Shift Knob] [180mm Double Din Dash] [Replacement Stock Headlight Bulb] [Various Interior Trim Pieces]

01-19-2010, 06:28 PM	#15
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	shouldn't be too bad. The TRD one is harder rubber than stock, and it doesn't add much to the noise in the cabin. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Nitrous Thread	ChinoCharles	Performance Modifications	116	02-16-2016 04:07 PM
DIY: Intake Installation	redyaris	DIY / Maintenance / Service	53	08-23-2014 06:34 AM
A Mystery Oi'll Say!	Yar Is Word	Fuel Economy Forum	16	05-11-2013 05:22 AM
Remote Engine Start PT398-33070	Reeves360	In Car Entertainment + Electronics (audio / video / alarm)	3	08-26-2009 08:11 PM

01-10-2010, 04:31 AM	#2
yaris-me Learn to Relax Drives: 2007, Meteorite, LB Join Date: Dec 2008 Location: Anaheim, CA Posts: 2,070	I would think that you would have problems with your CV joint or axle before the engine mount. You would hear a clunk sound when engaging the clutch or shifting.

01-10-2010, 04:57 AM	#3
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	its not when shifting, i get the clunk sound when holding the acceleration on first or second shift..like a knocking sound, sometime doesnt get it when fast shifting of first and second shift

01-16-2010, 02:38 AM	#4
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	anyone know part number of the engine mounting rear, left and upper.. for toyota vitz rs 1.5 NCP91

01-16-2010, 03:09 AM	#5
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	I get the same sound. Our cars dont have a front engine mount like 99 percent of all the other cars on the market. I supose to save cost and i guess they figured a economy car with small power engine wont have that much torque. But quick shifts will make the engine jerk a bit. You can get a nitto torque dampner which does help a bit or a stiffer rear mount such as trd or a solid one.

01-16-2010, 03:17 AM	#6
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	yes you right, we dont have front engine mount. mine rear one is damage, do you know where i can order it.

01-16-2010, 03:32 AM	#8
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	Thanks for the help, do you know where to order or the part number of the 3 mount kit

01-16-2010, 04:44 AM	#10
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Looks like its time to order a trd one from garm then

01-16-2010, 05:27 AM	#11
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	yes TRD much better and torque, anyone know where to order online

01-16-2010, 05:28 AM	#12
Nas_RS Vitz_RS Drives: Toyota Vitz RS NCP91 Join Date: May 2009 Location: Mauritius Posts: 84	diagram engine mount http://www.toyodiy.com/parts/p_J_200...HMVK_1107.html

01-19-2010, 10:27 AM	#13
YaYa1320 YaYa Drives: 2007 Yaris Liftback Join Date: Dec 2008 Location: Southern Maryland Posts: 117	I just filled the voids in the "dogbone" mount with 3M window weld. It cut down on the movement ALOT, and it was 18 bucks for the tube @ pep boys.

01-20-2010, 08:12 AM	#16
YaYa1320 YaYa Drives: 2007 Yaris Liftback Join Date: Dec 2008 Location: Southern Maryland Posts: 117	Not bad at all. I have always used stiff inserts in honda mounts for years, and the vibration in the Yaris with the window weld in the mount is not noticeable to me, but the engine movement is greatly reduced. I could feel the engine rocking back and forth before I did this, now I dont feel it rocking. I like it