![]() |
|
|
|
#1 |
![]() ![]() ![]() Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Photoshop expert, Pls Help!! Anyone?
Hi all, i am thinking of getting the Racing Hart CP-035 to replace my current black SSR type-F rims. Due to the fact that cp-035 are lighter than my current set up. But there's only light gold or white colour. I'll go for the light gold instead but i am afraid the light gold might not go well with my sliver.
I have attached my current ride & a pic of the cp035. Any photoshop expert pls kindly help me out on this. ![]() ![]() ![]()
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres Last edited by evo165; 07-11-2010 at 11:53 AM. |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Where are the pics?
|
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Pictures up!!
Pls helps....
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
|
|
|
|
|
#4 |
![]() ![]() ![]() Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
49 views but no one willing to help...?
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() |
well this is a quick one for ya. How's that?
|
|
|
|
|
|
#6 |
![]() ![]() ![]() Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Thank you Mr slothman86. The first edited pictures look great. But colour wise i am afraid it doesn't match well with my car, what u think?
![]() The 2nd pictures frt rim sure look like after going through a big pot hole.
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() |
LOL, I don't think it looks bad. It's pretty tough to make a flat wheel look good in perspective.
|
|
|
|
|
|
#8 |
![]() ![]() ![]() Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Thanks slothman86!
I might spray it to the SSR Gray/Gun Metal colour. Was kind if used to dark colour rims for my ride. Is there anyway u can help to touch up on the 2nd pictures for the front rims? Thanks once again for taking up your time.
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
|
|
|
|
|
#9 |
![]() ![]() ![]() ![]() Drives: 2008 meteorite hatchback Join Date: Nov 2008
Location: Illinois
Posts: 960
|
I think those in either gun metal or black would look great on your car.
__________________
- HOOOEY! That's one tahny little cawr! What the heck kinda toy is that? - A Toyota Yaris - A whut Yaris? |
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PhotoShop, Creaciones Ect | TEDDY@EVENTOFIEBRE.COM | Caribbean | 0 | 03-04-2010 04:47 PM |
| Wheel/hub spacer, PLS help | evo165 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 08-18-2009 03:21 AM |
| Place Your Photoshop Requests Here | RogueYaris | Off-topic / Other Cars / Everything else Discussions | 0 | 03-14-2009 05:39 AM |
| photoshop request | BokChoi | Photo-Video-Media Gallery | 17 | 05-09-2007 04:10 PM |
| Body kit photoshop for HB | ToyVitz | Cosmetic Modifications (Exterior/Interior) | 9 | 09-25-2006 09:48 AM |