![]() |
|
|
|
#1 |
![]() ![]() Drives: 2007 ls liftback 5 door manual Join Date: May 2012
Location: the hammer
Posts: 44
|
Quick question about setup
So all I have right now is a and one pair of hertz esk-165s. I have a 2007 liftback, now do I actually need a harness and dashkit or is that just something to make it look pretty? I plan on getting an amp and sub later and not having any rear speakers.
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() |
Think you left out some info. Are you adding a headunit as well ?
If so you need a wire harness and a dash kit. SqComp can probably give you more info on them Hertz.
__________________
![]() ![]() Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
|
|
|
|
#3 |
![]() ![]() Drives: 2007 ls liftback 5 door manual Join Date: May 2012
Location: the hammer
Posts: 44
|
Yes, forgot to CP it in, dumb me.
It's a AVH-P1400DVD double din. Why do you need the harness? |
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() |
Okay a bit of research will need to be done for the dash kit for a double din Unit.
![]() One end of the harness connects to your factory connector and the other end with the wires is color coded to connect to you aftermarket radio harness. Here's a pic of the back of that unit and the wire harness that connects to the harness listed above
__________________
![]() ![]() Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
|
|
|
|
#5 |
![]() ![]() Drives: 2007 ls liftback 5 door manual Join Date: May 2012
Location: the hammer
Posts: 44
|
Got it, for tweeter placement, do you think on that front dash top of the window , bottom of the window or on the pillar would be best?
|
|
|
|
|
|
#6 |
![]() ![]() Drives: 2007 ls liftback 5 door manual Join Date: May 2012
Location: the hammer
Posts: 44
|
Okay, got it, thought the connectors in the back were just the exact same cables.
|
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() |
SqComp can probably better guide you for placement. What I would recommend is an amp for that component set. I don't think they'll reach there full potential off the headunits power.
__________________
![]() ![]() Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
|
|
|
|
#8 |
|
Roadrunner Jr.
|
So you've got the 6" Energy component set?
The tweeters will help stage height if they're up in the pillars. As far as aiming, look for a spot as close to the glass and more on axis since they're a smaller 20mm format and you're probably using the crossover that comes with the set.
__________________
“To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine |
|
|
|
|
|
#9 | |
![]() ![]() ![]() ![]() |
Quote:
__________________
![]() ![]() Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
|
|
|
|
|
#10 |
![]() ![]() Drives: 2007 ls liftback 5 door manual Join Date: May 2012
Location: the hammer
Posts: 44
|
I was thinking of getting an amp in a couple of weeks when I have the money for a great one and a sub, I care more for quality then noise
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| reverse gear..quick question.. | Yaris2910 | DIY / Maintenance / Service | 10 | 01-11-2011 06:14 AM |
| Quick Oil Question | nickhjort | Performance Modifications | 5 | 04-27-2010 09:51 AM |
| Works bell/Nardi quick release steering wheel setup | blacksandiegovitz | Cosmetic Modifications (Exterior/Interior) | 35 | 09-02-2009 06:52 PM |
| quick air filter question | wingdood | DIY / Maintenance / Service | 3 | 05-11-2009 09:17 PM |
| Quick question.. | harveyjai | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 03-21-2009 06:38 PM |