first gen yaris header - Toyota Yaris Forums

fase4 · 08-22-2012, 03:17 PM

Hey, I'm looking to get a header from DC sports. But my yaris is a 1st gen TS 05 and there are two models of they: SHC4401 and THC4407.

They say the shc is for echo model 00-05 and the thc for yaris 07-

What you do say? Maybe I should go over the shc?

cali yaris · 08-22-2012, 10:50 PM

Are you ordering it from us?

Do you have the 1NZ-FE motor?
Is your pulley one or two-ribbed?

fase4 · 08-23-2012, 07:41 PM

I don't know yet. Maybe yes :D

Yes, it is a 1nz-fe. How can I know or see if is one or two-ribbed pulley? What does mean?

cali yaris · 08-23-2012, 08:06 PM

Look at your crank pulley -- is it driving one or two belts?

The Echo/xB/xA have two-belt pulleys, the Yaris (2nd gen) has a single belt pulley.

fase4 · 08-23-2012, 08:49 PM

It's driving 2 belts, one goes for the right (alternator, A/C...) And the other for the left (vane pump I think)

cali yaris · 08-23-2012, 09:01 PM

ok that's first gen -- echo, xB, xA. I probably have one in stock. Just installed one on my son's car too, sounds great.

fase4 · 08-23-2012, 09:14 PM

Learning something new, great! Thanx!

But that means I cannot install MI pulley? Nor NST?

fase4 · 01-11-2013, 07:37 PM

hey guys... I had a look to the stock header that is in my yaris and look a o2 sensor is in there, look back at the dc headers and the shc doesn't have a place to put it and the thc does.

my header looks very very similar to this http://photo.qip.ru/users/tolmach/96608749/129640829/
from TOLMACH even in the retainer fron the left

So I should go over for the header thc for yaris and no the echo/xB/xA?

cali yaris · 01-11-2013, 07:42 PM

The xB/xA header does not have an O2 bung, the Yaris one does. (THC vs. SHC part numbers). Tolmach's has the bung. Header is THC4407

fase4 · 01-11-2013, 08:09 PM

So the header is the THC. What about the fitment? it will going all matched?

08-22-2012, 03:17 PM	#1
fase4 Drives: Yaris TS 05 Join Date: Jun 2011 Location: Venezuela Posts: 34	first gen yaris header Hey, I'm looking to get a header from DC sports. But my yaris is a 1st gen TS 05 and there are two models of they: SHC4401 and THC4407. They say the shc is for echo model 00-05 and the thc for yaris 07- What you do say? Maybe I should go over the shc?

08-22-2012, 10:50 PM	#2
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Are you ordering it from us? Do you have the 1NZ-FE motor? Is your pulley one or two-ribbed? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-23-2012, 08:06 PM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Look at your crank pulley -- is it driving one or two belts? The Echo/xB/xA have two-belt pulleys, the Yaris (2nd gen) has a single belt pulley. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-23-2012, 09:01 PM	#6
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	ok that's first gen -- echo, xB, xA. I probably have one in stock. Just installed one on my son's car too, sounds great. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

01-11-2013, 07:42 PM	#9
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	The xB/xA header does not have an O2 bung, the Yaris one does. (THC vs. SHC part numbers). Tolmach's has the bung. Header is THC4407 __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-23-2012, 07:41 PM	#3
fase4 Drives: Yaris TS 05 Join Date: Jun 2011 Location: Venezuela Posts: 34	I don't know yet. Maybe yes :D Yes, it is a 1nz-fe. How can I know or see if is one or two-ribbed pulley? What does mean?

08-23-2012, 08:49 PM	#5
fase4 Drives: Yaris TS 05 Join Date: Jun 2011 Location: Venezuela Posts: 34	It's driving 2 belts, one goes for the right (alternator, A/C...) And the other for the left (vane pump I think)

08-23-2012, 09:14 PM	#7
fase4 Drives: Yaris TS 05 Join Date: Jun 2011 Location: Venezuela Posts: 34	Learning something new, great! Thanx! But that means I cannot install MI pulley? Nor NST?

01-11-2013, 07:37 PM	#8
fase4 Drives: Yaris TS 05 Join Date: Jun 2011 Location: Venezuela Posts: 34	hey guys... I had a look to the stock header that is in my yaris and look a o2 sensor is in there, look back at the dc headers and the shc doesn't have a place to put it and the thc does. my header looks very very similar to this http://photo.qip.ru/users/tolmach/96608749/129640829/ from TOLMACH even in the retainer fron the left So I should go over for the header thc for yaris and no the echo/xB/xA?

01-11-2013, 08:09 PM	#10
fase4 Drives: Yaris TS 05 Join Date: Jun 2011 Location: Venezuela Posts: 34	So the header is the THC. What about the fitment? it will going all matched?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Transmission Oil for Yaris 1st Gen	adigilani	DIY / Maintenance / Service	3	10-23-2011 03:48 PM
Scion xB, Toyota Echo, older gen Yaris owners...	NonStopTuning	NonStopTuning	1	01-24-2009 12:44 AM
Looking to buy a header and an intake for my Yaris.	nevermorez	Performance Modifications	2	01-04-2007 03:35 AM