|
02-09-2013, 09:25 PM | #1 |
Drives: vitz rs Join Date: Oct 2012
Location: paraguay
Posts: 2
|
1nzfe + glanza turbo kit
Hi guys and girls.. this is my first post...
Well first i want to apologize for my bad bad english. Im planning to turbocharge my vitz rs ncp13 1nzfe manual. Im about to buy an aem fic. First step in my build. Well i was wondering if i could get a stock glanza turbo kit I can fit it in my vitz? And make custom pipes etc. It would be pretty expensive for me to import parts, like 9uss Per pound.. and thas without calculating volume... plus taxes etc.. If i can build my turbo like im plannig. What kind of hp do u think i can get? Stock internals. Ty vm ;) |
02-09-2013, 09:59 PM | #2 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
I've never seen a Glanza. What do you know about the motor/turbo/etc. that it has?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
02-09-2013, 10:04 PM | #3 |
Drives: vitz rs Join Date: Oct 2012
Location: paraguay
Posts: 2
|
Sorry for not being specific..
Glanza is the starlet gt... It uses a 4efte engine. 1300cc ct9 charger |
02-13-2013, 11:50 AM | #4 |
Obsessed with 1.5L
Drives: '10 PW Yaris Sedan Join Date: Feb 2011
Location: Westminster, MD
Posts: 907
|
no it wont work, exhaust is on the wrong side & the stock ct9 turbo is much too small for a highflowing 1nz (compared to e-series motors).
your better off with the Zage kit from Garm, or starting from scratch
__________________
-Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr |
02-27-2013, 05:15 PM | #5 | |
Quote:
I would never go smaller than a Garrett GT2252 on a 1nzfe or you may have troubles for multiples reasons. (own experience) www.turbobygarrett.com For your AEM FIC; they make a nice plug-n-play harness that takes 5mins to install and ready to use I made a 145whp/145wtq on mustang dyno @5.75psi, Garrett GT2252 journal bearing. This is a conservative horsepower, some ppl are getting more out of it but personaly I would never go over 150whp on stock rods. |
||
03-08-2013, 08:51 AM | #6 | |
Quote:
the turbo itself is small, its smaller than a t-25. it has very little lag, comes in at 2.500/3 aprox. I managed to run it at 18psi np, some mates even tried 22psi on it but off course it runs out of puff. it was my first baby! 220bhp on 940kg :-) mates running mid 10's on the 4efte monster toyota and yamaha built!! http://www.youtube.com/watch?v=Yxo9d...qvAGN5jfeEnh7A |
||
03-08-2013, 08:53 AM | #7 |
03-08-2013, 09:04 AM | #8 | |
Quote:
Hi Mate, that was my very first idea but it will not fit :-( all the probs you mentioned are the same thing here. Try and get hold of a 1nzfe Turbo (JDM Vitz Rs TRD sports M) parts, that is what I am trying to get hold, buy a full engine, it will be cheaper than buying any s/c or turbo kit from outside the EU. |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
FS: OEM Toyota Vios Turbo Kit | CTScott | Items for Sale by private party | 24 | 07-31-2011 09:12 AM |
ANCLA turbo kit warning! | 1.5 | Forced Induction Forum | 11 | 02-26-2010 08:04 PM |
zage turbo kit..! just need some help | joseyaris | Forced Induction Forum | 12 | 10-29-2009 08:35 PM |
Turbo Kit - trade for stock parts! | crankyelbow | Items for Sale by private party | 62 | 02-03-2009 12:30 PM |