suggest some wheels for my yaris! - Toyota Yaris Forums

d3310n · 11-24-2013, 11:32 PM

heres what its currently on, bought the car with them, hate them. show me some wheels that you guys think would look good. looking for some 15s that are narrower so they wont rub.

d3310n · 11-25-2013, 12:38 AM

http://ebay.com/itm/151173332762?nav=SEARCH&sbk=1

What about these? Im getting a real exhaust, doing the tails all red and posibly removing the lip to clean up the look of the car.

*kimona* · 11-25-2013, 01:06 PM

Quote:

Originally Posted by d3310n

http://ebay.com/itm/151173332762?nav=SEARCH&sbk=1

What about these? Im getting a real exhaust, doing the tails all red and posibly removing the lip to clean up the look of the car.

That offset won't work without some camber adjustment and some serious fender rolling.

d3310n · 11-25-2013, 01:21 PM

like how much camber and what exactley is fender rolling?

and is the problem in the front or the rear?

WeeYari · 11-25-2013, 02:06 PM

If you don't want any rub, you cannot go with an offset number any less than +38 on a 7 inch wheel. Any less than that and you'll start to experience rear fender rub on hard dips. At around +32, you'll have to start introducing moderate camber in the rear, 1.5 to 3 degrees.

Fender rolling is the act of stretching or bending the fender arches outward in order to clear low offset wheels.

d3310n · 11-25-2013, 02:55 PM

Ok i dont think thats nothing i cant handle. I can have agressive offset on the front and not have problems, correct?

WeeYari · 11-25-2013, 03:06 PM

Quote:

Originally Posted by d3310n

I can have agressive offset on the front and not have problems, correct?

No. Upfront you can still experience fender rub during spring compression, though it happens much more easily in the rear. Also, with aggressive offset, a rub sill start to occur at or near full lock when turning.

d3310n · 11-25-2013, 03:54 PM

Quote:

Originally Posted by WeeYari

No. Upfront you can still experience fender rub during spring compression, though it happens much more easily in the rear. Also, with aggressive offset, a rub sill start to occur at or near full lock when turning.

Full lock i dont mind. But how do the coilover guys over rubbing while cornering? I already have rubbing in the front with cornering and i have 205 s and 40 offset. Im stumped. Is our car just that rubby

jtsimaras · 11-25-2013, 11:39 PM

Not a yaris but some classics may look nice MB Mesh X

http://www.bortzmedia.com/fit/fitnew1.jpg

d3310n · 11-26-2013, 01:00 AM

Quote:

Originally Posted by jtsimaras

Not a yaris but some classics may look nice MB Mesh X

http://www.bortzmedia.com/fit/fitnew1.jpg

thanks for the contribution. i do like those!

more posts like this?

jtsimaras · 11-26-2013, 01:09 AM

Quote:

Originally Posted by d3310n

thanks for the contribution. i do like those!

more posts like this?

I'm new on here, that was my first post. I picked up a blazing blue 07 3 dr last week as a second winter car. I just purchased the mesh x in 16 and will post some real pics once installed---about 2 weeks or so.

*kimona* · 11-26-2013, 02:01 AM

Drag DR20's. Available in numerous colours.

*kimona* · 11-26-2013, 02:10 AM

ROTA RB's.

1.5 · 11-26-2013, 08:34 AM

Enkei RpF1

G-Ammo · 11-26-2013, 10:40 AM

I have 15x7 ET20 with 185/45 tyres... even 15mm spacers in the back, no rubbing up front or in the back (only when i go through deep holes i didnt see, lol, or when people are in the back seat). Im also on BC racing coilovers at stiffest setting :)

tooter · 11-26-2013, 12:08 PM

Quote:

Originally Posted by kimona

ROTA RB's.

+2 on the Rotas.

I don't care for any of the current wheel designs, but have always loved those wheels..

...since that design first came out in the 1950's with the Minilite Mini Cooper wheel. Here's a 1957...

d3310n · 11-26-2013, 12:17 PM

oh man those rbs are somethin else. id love to go for that toyobaru yaris look, but id do everything the same, im a copycat lol.

cali yaris · 11-26-2013, 01:03 PM

MUST start with budget. What is it? $500? $500-1000? $1000-1500? $1500+?

11-25-2013, 02:06 PM	#5
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,809	If you don't want any rub, you cannot go with an offset number any less than +38 on a 7 inch wheel. Any less than that and you'll start to experience rear fender rub on hard dips. At around +32, you'll have to start introducing moderate camber in the rear, 1.5 to 3 degrees. Fender rolling is the act of stretching or bending the fender arches outward in order to clear low offset wheels. __________________

11-26-2013, 08:34 AM	#14
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Enkei RpF1 __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

11-26-2013, 10:40 AM	#15
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	I have 15x7 ET20 with 185/45 tyres... even 15mm spacers in the back, no rubbing up front or in the back (only when i go through deep holes i didnt see, lol, or when people are in the back seat). Im also on BC racing coilovers at stiffest setting :) __________________ Speedbumps suck...!

11-26-2013, 01:03 PM	#18
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	MUST start with budget. What is it? $500? $500-1000? $1000-1500? $1500+? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Comparison Test: 2012 Toyota Yaris Vs. 2012 Toyota Prius c	Yar Is Word	Third Gen Yaris General Discussion	27	09-07-2012 12:37 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

11-25-2013, 12:38 AM	#2
d3310n Drives: black titty Join Date: Jun 2013 Location: florida Posts: 89	http://ebay.com/itm/151173332762?nav=SEARCH&sbk=1 What about these? Im getting a real exhaust, doing the tails all red and posibly removing the lip to clean up the look of the car.

11-25-2013, 01:21 PM	#4
d3310n Drives: black titty Join Date: Jun 2013 Location: florida Posts: 89	like how much camber and what exactley is fender rolling? and is the problem in the front or the rear?

11-25-2013, 02:55 PM	#6
d3310n Drives: black titty Join Date: Jun 2013 Location: florida Posts: 89	Ok i dont think thats nothing i cant handle. I can have agressive offset on the front and not have problems, correct?

11-25-2013, 11:39 PM	#9
jtsimaras Drives: S2000 / MAZDA CX5 GT / YARIS Join Date: Nov 2013 Location: CANADA Posts: 6	Not a yaris but some classics may look nice MB Mesh X http://www.bortzmedia.com/fit/fitnew1.jpg

11-26-2013, 12:17 PM	#17
d3310n Drives: black titty Join Date: Jun 2013 Location: florida Posts: 89	oh man those rbs are somethin else. id love to go for that toyobaru yaris look, but id do everything the same, im a copycat lol.