2007 Yaris Sedan - TRD lowering springs don't fit?

[07RustyYaris]

Hi Everyone,

I have a 2007 Yaris Sedan (NCP93L). I recently bought the TRD shocks/struts & lowering springs directly from a dealership. I was having them installed at this local shop I frequent, but they're telling me that the front lowering springs are too short for the shocks. The rear shocks/struts have been installed with no problem. Has anyone run into this issue in the past?

These are the part numbers of what I used:

PTR11-52070 PTR04-52061

Thanks in advance!

[Compeer]

Originally Posted by 07RustyYaris

Hi Everyone,

I have a 2007 Yaris Sedan (NCP93L). I recently bought the TRD shocks/struts & lowering springs directly from a dealership. I was having them installed at this local shop I frequent, but they're telling me that the front lowering springs are too short for the shocks. The rear shocks/struts have been installed with no problem. Has anyone run into this issue in the past?

These are the part numbers of what I used:

PTR11-52070 PTR04-52061

Thanks in advance!

my 2006 came with the full trd suspension pack from factory, it has the blue trd and white sportivo springs. The springs part number is 48131-kp900
on mine tho i found the same spring with 48131-np900, so unsure what the difference is now.

https://cdn.discordapp.com/attachmen...1fc0bd16c21aa&

[MUSKOKA800]

I ran TRD springs on TRD dampers under my 2008 sedan. I did however include Fatcat poly bump stops and had no bottoming issues.