TANABE DF210 Spring Install [pics]

[Moose]

Originally Posted by Chris07LB

I only cut mine, just because over the years every car i've lowered, said to.
I called Tanbe USA just to ask and be sure, and they said to cut them as well.

I've lowered countless cars, and I always cut the amount off of the bumpstop that the car is being lowered (cut 1.5" off of the bumpstop if you are lowering the car 1.5"). That way, the strut travel stays exactly the same as it was while stock springs were on the vehicle, and leads to longer strut life, and thus more time to save up for Koni reds.