Pulling wires through the Yaris

[bigsky2]

Originally Posted by Yaris-TJ

Attachment 2382
will the cutting-hanger solution work or make it easier?

Yes, I used the exact same method with a hanger. I also had a few other tools to help along like a snake wire.

But trust me, it looks easier said than done!
The boot is almost sealed in design, and there are only two small holes for you to run the wire through one hole and route it to the other hole. You want to run the wire exclusively inside the rubber boot and not outside of it. This keeps the wire safe from moisture, and any possible damage if it catches on to anything.

It's easy if you are running thin gauge wires, like 18AWG. The profanity and frustration kicks in when you run 16AWG or thicker wires
I used 16AWG for the front speakers, and then I had to use 14AWG for the rears since I ran out.

I'm glad I'm done with that