How To Smoked Sedan Headlight -DIY

[zulhizainL902S]

GUys,

I believe i already post this before, but seems our forums has been hacked..then it was gone. I post it again for your viewing pleasure..hehe

Pic Before



Pic After




Tools Needed

1. ABRO High Temp Flat Black - RM17.90
2. High Temp Clear Sealant - RM6.00
3. Orange Sticker - RM8.00
4. Hair Dryer
5. 10mm Socket Spanner
6. Philips Screwdriver
7. Scissors






And The Process Begin..

Firstly, we have to unscrew 6 bolts below bumper and 6 clips on top of grill.


The clips.


Unscrew this bolts.

Then u have to take out the bumper a bit.


more than enough..

Then, unscrew the headlight screw (3). Then u should able to take out the headlight easily.


Lucky my brother able to help me a bit.




there u go..

meanwhile..





Then, use Hair Dryer to heat up the headlight original glue/sealant.





Then carefully take out the housing. Macam kupas durian da..



Remember to take out those two bulbs also.



Headlight has been dismantled..





Then, gently remove those 3 tiny scre at the back of the headlight cover.





Tadaaaaaa...


take off everything..


Now the spraying process.





can u spot the differences..




now..leave the paint to dry, go get the sticker. after done doing some outline drawing, cut the sticker...







then just fix the sticker at the lens cover. sorry no pics for this part!

Then, go back to the headlight cover. fix it back to the headlight unit, i make it 4 layer.





Heat the sealant back in order to fix the headlight unit. once again, hair dryer please..





Using sealant to make it seal properly. and leave it to dry for about 15 minutes time.



now..attached the headlight unit back to its original place..there you go.



remember to fix all the screw, bolts and clips...then walllllaaaaaa..